When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Attaque de virus ou de logiciels malveillants.
- Système d'exploitation obsolète.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icône.
2. If the status is set to Pas connecté, Cliquez sur le Network globe icon, choose your Wi-Fi network and click on NOUS CONTACTER button. Make sure Mode avion n'est pas activé.
3. If you again face the same network connection error code, then click on the Disconnect button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Faites un clic droit sur le Icône Wi-Fi et sélectionnez Open Network & Internet settings.
6. Cliquez sur Wi-Fi.
7. Scroll down the right menu, click on Gérer les réseaux connus.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Oublier.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Méthode 2 : redémarrer le routeur
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Remarque: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Trouvez le Bouton d'alimentation à l'arrière de votre routeur.
2. Appuyez une fois sur le bouton pour éteignez-le.
3. Maintenant, couper Un flux efficace peut augmenter Router power cable et attendez que l'énergie soit entièrement vidée des condensateurs.
4. Ensuite, reconnecter le câble électrique et allumez-le après une minute.
5. Attendez que la connexion réseau soit rétablie et essayez de vous connecter à nouveau.
Lisez aussi: Réparer les ordinateurs qui n'apparaissent pas sur le réseau sous Windows 10
Méthode 3: exécutez l'utilitaire de résolution des problèmes réseau
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Frappez le Touche Windows et le type Dépanner les paramètres dans la barre de recherche et Ouvrez-le.
2. Cliquez sur Dépanneurs supplémentaires.
3 Sélectionner Adaptateur réseau et cliquez sur Exécuter l'utilitaire de résolution des problèmes.
4. Select the network adapter to diagnose et cliquez sur Suivant.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, cliquer sur Fermer le dépanneur.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Lisez aussi: Réparer le partage familial sur YouTube TV ne fonctionne pas
Méthode 4 : réparer les fichiers système
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Vérificateur des fichiers système) /DISM (Gestion et maintenance des images de déploiement) utilities on your Windows 10 PC.
1. Frappez le Touche Windows, Le type Invite de commandes et cliquez sur Exécuter en tant qu'administrateur.
2. Cliquez sur Oui dans l' Contrôle de compte d'utilisateur rapide.
3. Type chkdsk C: / f / r / x commandez et frappez La touche Entrée.
4. Si un message vous est demandé, Chkdsk ne peut pas s'exécuter… le volume est… en cours d'utilisation, puis tapez Y et appuyez sur la La touche Entrée.
5. Encore une fois, tapez la commande : sfc / scannow et appuyez sur La touche Entrée pour exécuter le Vérificateur des fichiers système balayage.
Remarque: Une analyse du système sera lancée et prendra quelques minutes. Pendant ce temps, vous pouvez continuer à effectuer d’autres activités, mais veillez à ne pas fermer accidentellement la fenêtre.
Une fois l'analyse terminée, l'un de ces messages s'affichera :
- La protection des ressources Windows n'a détecté aucune violation d'intégrité.
- La protection des ressources Windows n'a pas pu effectuer l'opération demandée.
- Windows Resource Protection a trouvé des fichiers corrompus et les a réparés avec succès.
- La protection des ressources Windows a détecté des fichiers corrompus mais n'a pas pu résoudre certains d'entre eux.
6. Une fois l'analyse terminée, recommencer votre PC.
7. Encore une fois, lancez Invite de commandes en tant qu'administrateur et exécutez les commandes données les unes après les autres :
dism.exe /En ligne /cleanup-image /scanhealth dism.exe /En ligne /cleanup-image /restorehealth dism.exe /En ligne /cleanup-image /startcomponentcleanup
Remarque: Vous devez disposer d'une connexion Internet fonctionnelle pour exécuter correctement les commandes DISM.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Frappez le Touche Windows et le type Gestionnaire de périphériques in the Windows search menu. Click on Ouvert.
2. Développez le Cartes réseau section en double-cliquant dessus.
3. Faites un clic droit sur votre Le driver de réseau (par exemple, Intel (R) Dual Band Wireless-AC 3168) et sélectionnez le Désactiver l'appareil option.
4. Confirm the below prompt by clicking on Oui.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Activer le périphérique option.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Lisez aussi: Réparer Windows n'a pas pu détecter automatiquement les paramètres proxy de ce réseau
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Allez dans le menu de recherche et tapez cmd. Cliquez sur Exécuter en tant qu'administrateur.
2. Tapez ce qui suit commandes et appuyez sur la La touche Entrée.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Attendez que les commandes soient exécutées et redémarrez votre PC.
Méthode 7 : vider le cache DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. lancement Invite de commandes by searching in the Windows Menu and click on Run as administrator.
2. Type ipconfig / flushdns dans la fenêtre de commande et appuyez sur Entrer.
Lisez aussi: [SOLVED] Windows detected a hard disk problem
Méthode 8 : désactiver IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Lancer le Courir boîte de dialogue en appuyant sur Windows + R touches ensemble.
2. Type ncpa.cpl et frapper La touche Entrée.
3. Faites un clic droit sur votre actif Adaptateur de réseau et cliquez sur Propriétés.
4. Décochez la case Protocole Internet version 6 (TCP / IPv6) option.
5. Enfin, cliquez sur OK pour enregistrer les modifications et vérifier si le problème est résolu.
Remarque: If you use multiple network connections, navigate to Centre Réseau et partage ainsi que Changer d'adaptateur settings. Right-click on the adapter and select Désactiver. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Type Gestionnaire de périphériques in the Windows search menu and click Ouvert.
2. Double-cliquez sur le Cartes réseau pour l'agrandir.
3. Faites un clic droit sur votre driver (par exemple Intel (R) Dual Band Wireless-AC 3168) et cliquez sur Mettre à jour le pilote.
4. Cliquez sur Parcourir mon ordinateur pour les pilotes to locate and install a driver manually.
5. Cliquez sur le Navigateur button to choose any directory and click on Suivant.
5A. The drivers will be updated to the latest version if they are not updated.
5B. S'ils sont déjà en phase de mise à jour, l'écran affiche le message suivant, Les meilleurs pilotes pour votre appareil sont déjà installés.
6. Cliquez sur Fermer pour sortir de la fenêtre.
7. Recommencer the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. lancement Gestionnaire de périphériques from the Windows search menu.
2. Faites un clic droit sur le driver et sélectionnez Désinstaller le périphérique.
3. A warning prompt will be displayed on the screen. Check the box “Supprimer le logiciel pilote pour ce périphérique” and confirm the prompt by clicking Désinstaller.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Visiter le site web du fabricant.
2. Trouvez ainsi que Télécharger les pilotes correspondant à la version de Windows sur votre PC.
3. Once downloaded, double click on the fichier téléchargé et suivez les instructions données pour l'installer.
Lisez aussi: Comment configurer un VPN sur Windows 10
Méthode 10: mettre à jour Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. appuie sur le Windows + I clés ensemble pour ouvrir Paramètres sur votre ordinateur.
2 Sélectionner Mise à jour et sécurité.
3 Sélectionner Check for Updates.
4A. Click Installer maintenant pour télécharger et installer la dernière mise à jour disponible.
4B. Si votre système est déjà à jour, il affichera Vous êtes à jour par voie électronique.
Méthode 11 : désinstaller les mises à jour récentes
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Appuyez et maintenez Windows + R touches ensemble pour ouvrir le Courir boite de dialogue.
2. Type appwiz.cpl et frapper Entrer.
3. Cliquez sur Voir mises à jour installées.
4. Select the most recent update and click on Désinstaller.
5. Confirm the prompt, if any, and redémarrer le PC.
Lisez aussi: Comment réparer Firefox qui ne charge pas les pages
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the adaptateurs réseau installed in your PC along with their settings. All the stored settings are stored to default settings.
Remarque: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Paramètres puis Système ainsi que Qui sommes-nous. Once you have reset your network, you have to reinstall all networking software comme Clients VPN or Commutateurs virtuels.
1. Appuyez et maintenez Touches Windows + I ensemble pour ouvrir Paramètres Windows.
2. Cliquez sur Réseau et Internet.
3. Cliquez sur Réinitialisation du réseau sous Statut.
4. Confirm the prompt by clicking on Réinitialiser maintenant.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recommandée:
We hope that this guide was helpful and you could fix Windows 10 network connection error Assistance . Faites-nous savoir quelle méthode a le mieux fonctionné pour vous. De plus, si vous avez des questions/suggestions concernant cet article, n'hésitez pas à les déposer dans la section commentaires.