If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Carte réseau non détectée
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
Fix Network Adapter Missing in Windows 10
Assurez-vous de créer un point de restauration au cas où quelque chose se passerait mal.
Method 1: Reboot your Computer
Most of us know about this very basic trick. Rebooting your computer can sometimes fix any software conflict by giving it a fresh start. So if you are someone who would rather put their computer on sleep, restarting your computer is a good idea.
1. Cliquez sur le menu Démarrer puis cliquez sur le Bouton d'alimentation disponible dans le coin inférieur gauche.
2. Ensuite, cliquez sur le Recommencer option et votre ordinateur redémarrera tout seul.
Après le redémarrage de l'ordinateur, vérifiez si votre problème est résolu ou non.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. Tapez maintenant la commande suivante et appuyez sur Entrée après chacune d'elles :
ipconfig / release ipconfig / flushdns ipconfig / renew
3. Again open Command Prompt and type the following command one by one and hit enter after each one:
ipconfig /flushdns nbtstat –r netsh int ip réinitialiser netsh winsock réinitialiser
4. Redémarrez pour appliquer les modifications. Le vidage du DNS semble Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. Appuyez sur la touche Windows + R puis tapez services.msc et appuyez sur Entrée.
2. Trouver WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3. Double-cliquez sur WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select Automatique.
5. Click Apply followed by OK.
6. Faites un clic droit sur le WWAN AutoConfig Service et sélectionnez Début.
Méthode 4 : mettre à jour les pilotes de la carte réseau
1. Appuyez sur la touche Windows + R et tapez «devmgmt.msc” in Run dialogue box to open Gestionnaire de périphériques.
2. Développer Cartes réseau, puis faites un clic droit sur votre Contrôleur Wi-Fi (par exemple Broadcom ou Intel) et sélectionnez Mettre à jour le logiciel du pilote.
3. Sélectionnez maintenant «Rechercher automatiquement le logiciel pilote mis à jour" .
4. À présent Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. Une fois terminé, fermez tout et redémarrez votre PC.
6. Si vous êtes toujours confronté au Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select Mettre à jour le pilote dans le Gestionnaire de périphériques.
7. Maintenant, dans Windows de mise à jour du logiciel du pilote, sélectionnez «Parcourir mon ordinateur pour le logiciel pilote."
8. Sélectionnez maintenant «Permettez-moi de choisir parmi une liste de pilotes disponibles sur mon ordinateur."
9. Essayez de mettez à jour les pilotes à partir des versions répertoriées (assurez-vous de cocher le matériel compatible).
10. Si les solutions ci-dessus ne fonctionnent pas, accédez à le site du fabricant pour mettre à jour les pilotes.
11. Download and install the latest driver from the manufacturer’s website then restart your PC.
Method 5: Uninstall Network Adapter Drivers
1. Appuyez sur la touche Windows + R puis tapez «devmgmt.msc" et appuyez sur Entrée pour ouvrir le Gestionnaire de périphériques.
2. Développez Adaptateurs réseau et recherchez le nom de votre adaptateur réseau.
3. Assurez-vous notez le nom de l'adaptateur juste au cas où quelque chose ne va pas.
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation sélectionnez Oui.
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on Action puis cliquez sur "Rechercher les modifications matérielles" .
Méthode 6 : assurez-vous que Windows est à jour
1. presse Touche Windows + I pour ouvrir Paramètres puis cliquez sur Mise à jour et sécurité.
2. Depuis le côté gauche, cliquez sur le menu Windows Update.
3. Cliquez maintenant sur le «Vérifiez les mises à jour" pour vérifier les mises à jour disponibles.
4. Si des mises à jour sont en attente, cliquez sur Téléchargez et installez les mises à jour.
5. Une fois les mises à jour téléchargées, installez-les et votre Windows sera à jour.
6. After the updates are installed reboot your PC to save changes.
Méthode 7 : Exécuter l’utilitaire de résolution des problèmes de carte réseau
1. Appuyez sur la touche Windows + I pour ouvrir les paramètres puis cliquez sur Mise à jour et sécurité.
2. From the left-hand menu select Dépanner.
3. Under Troubleshoot click on Connexions Internet puis cliquez sur Exécutez l'utilitaire de résolution des problèmes.
4. Suivez les instructions supplémentaires à l'écran pour exécuter l'utilitaire de résolution des problèmes.
5. Si les solutions ci-dessus n'ont pas résolu le problème, dans la fenêtre Dépannage, cliquez sur Adaptateur réseau puis cliquez sur Exécutez l'utilitaire de résolution des problèmes.
5. Redémarrez votre PC pour enregistrer les modifications et voir si vous pouvez fix the Network Adapter Missing issue.
Method 8: Install Intel PROSet/Wireless Software
Parfois, le problème est dû à un logiciel Intel PROSet obsolète, il semble donc que sa mise à jour semble être fix Network Adapter Missing in Windows 10 issue. Par conséquent, allez ici and download the latest version of PROSet/Wireless Software and install it. This is a third party software which manages your WiFi connection instead of Windows and if PROset/Wireless Software is outdated is can cause drivers issue in Adaptateur réseau sans fil. Hence, read How to Update Network Adapter Drivers on Windows 10.
Méthode 9 : réinitialiser la connexion réseau
1. Appuyez sur la touche Windows + I pour ouvrir les paramètres puis cliquez sur Réseau et Internet.
2. From the left-hand menu select Statut.
3. Maintenant, faites défiler vers le bas et cliquez sur Réinitialisation du réseau au fond.
4. Cliquez à nouveau sur "Réinitialiser maintenant” under Network reset section.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
Méthode 10 : effectuer une restauration du système
System Restore always works in resolving the error, therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. Appuyez sur la touche Windows + X puis sélectionnez Invite de commande (Admin).
2. Tapez la commande suivante dans cmd et appuyez sur Entrée :
netcfg –sn
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg delete HKCRCLSID {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
netcfg -v -u dni_dne
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. Appuyez sur la touche Windows + R puis tapez regedit et appuyez sur Entrée.
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type netcfg -v -u dni_dne command in cmd.
10. Redémarrez votre PC pour enregistrer les modifications.
Recommandé pour vous:
Voilà, vous avez réussi Fix Network Adapter Missing in Windows 10 mais si vous avez encore des questions concernant cet article, n'hésitez pas à les poser dans la section commentaires.