When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Ferâldere bestjoeringssysteem.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe byldkaike.
2. If the status is set to Net oansletten, klikje op 'e Network globe icon, choose your Wi-Fi network and click on Ferbine button. Make sure Airplane mode is net ynskeakele.
3. If you again face the same network connection error code, then click on the Disconnect button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Rjochts-klikke op de Wi-Fi-byldkaike en selektearje Open Network & Internet settings.
6. Klik op Wi-Fi.
7. Scroll down the right menu, click on Verwende bekende netwurken.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Ferjitte.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metoade 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Noat: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Fyn de Knop knop at the back of your router.
2. Press the button once to Set it út.
3. No, ôfskiede dyn Router power cable en wachtsje oant de macht is hielendal ôfwettere út de capacitors.
4. Dan, ferbine de macht kabel en skeakelje it op nei in minút.
5. Wait until the network connection is re-established and try signing in again.
Lês ek: Fix Computers Not Showing Up on Network in Windows 10
Metoade 3: Netwurkprobleemer útfiere
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Hit de Windows-kaai en type Ynstellingen oplosse yn de sykbalke en Iepenje.
2. Klik op Oanfoljende troubleshooters.
3. Útkieze Netwurk adapter en klikje op Laad de troubleshooter.
4. Select the network adapter to diagnose en klikje op Folgjende.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, klikje op Slút de troubleshooter.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Lês ek: Fix Family Sharing YouTube TV wurket net
Metoade 4: Systeembestannen reparearje
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Systeem File Checker) /DISM (Ferwidering Image Service and Management) utilities on your Windows 10 PC.
1. Hit de Windows-kaai, type Opdrachtprompt en klikje op Run as administrator.
2. Klik op Ja yn de Kontrôle foar brûker akkount prompt.
3. Type chkdsk C: / f / r / x kommando en hit Enter kaai.
4. As jo frege wurde mei in berjocht, Chkdsk kin net rinne ... it folume is ... yn gebrûk proses, dan, type Y en rekke de Enter kaai.
5. Typ nochris it kommando: sfc / scannow en parse Enter kaai te rinne de Systeem File Checker scan.
Noat: In systeemscan sil inisjearre wurde en it sil in pear minuten duorje om te foltôgjen. Underwilens kinne jo trochgean mei it útfieren fan oare aktiviteiten, mar hâld der rekken mei dat jo it finster net per ongeluk slute.
Nei it foltôgjen fan de scan sil it ien fan dizze berjochten sjen litte:
- Windows Resource Protection fûn gjin yntegriteitskendingen.
- Windows Resource Protection koe de frege operaasje net útfiere.
- Windows Resource Protection fûn korrupte bestannen en reparearre se mei súkses.
- Windows Resource Protection fûn korrupte triemmen mar koe gjinien fan har beheine.
6. Sadree't de scan klear is, opnij begjinne jo PC.
7. Nochris, lansearje Command Prompt as behearder en fier de opjûne kommando's ien nei de oare út:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Noat: Jo moatte in wurkjende ynternetferbining hawwe om DISM-kommando's goed út te fieren.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Hit de Windows-kaai en type Device Manager in the Windows search menu. Click on Iepen.
2. Wreidzje de Netwurkadapters seksje troch derop te dûbelklikken.
3. Rjochts-klikke op dyn Netwurk stjoerprogramma (bygelyks, Intel (R) Dual Band Wireless-AC 3168) en selektearje it Disjipeare apparaat opsje.
4. Confirm the below prompt by clicking on Ja.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the It apparaat ynskeakelje opsje.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Lês ek: Fix Windows koe de proxy-ynstellingen fan dit netwurk net automatysk ûntdekke
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Klik op Run as administrator.
2. Typ de folgjende kommando's en rekke de Enter kaai.
netsh winsock reset netsh ynt ip reset ipconfig / release ipconfig / fernije
3. Wait for the commands to be executed and opnij starte jo PC.
Metoade 7: DNS-cache spoelen
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Launch Opdrachtprompt by searching in the Windows menu and click on Run as administrator.
2. Type ipconfig / flushdns in the command window and hit Yngean.
Lês ek: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Start de run dialoochfinster troch te drukken Windows + R-kaaien mei-inoar.
2. Type ncpa.cpl en rekke Enter kaai.
3. Right-click on your active netwurk adapter en klikje op eigenskippen.
4. Uncheck de Ynternetprotokol Ferzje 6 (TCP / IPv6) opsje.
5. As lêste, klik op OK to save the changes and check if the issue is resolved.
Noat: If you use multiple network connections, navigate to Netwurk en dielsintrum en Adapter feroarje settings. Right-click on the adapter and select Disable. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Type Device Manager in the Windows search menu and click Iepen.
2. Dûbelklik op de Netwurkadapters it út te wreidzjen.
3. Rjochts-klikke op dyn sjauffeur (bgl Intel(R) Dual Band Wireless-AC 3168) en klikje Update driver.
4. Klik op Sykje myn kompjûter nei bestjoerders to locate and install a driver manually.
5. Klik op 'e blêder button to choose any directory and click on Folgjende.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, De bêste bestjoerders foar jo apparaat binne al ynstalleare.
6. Klik op Slute om it finster út te gean.
7. Restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Launch Device Manager from the Windows search menu.
2. Rjochts-klikke op de sjauffeur en selektearje Unjildich apparaat wiskje.
3. A warning prompt will be displayed on the screen. Check the box “Wisk de triem software foar dit apparaat” and confirm the prompt by clicking -ynstallaasje.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Besykje de webside fan fabrikant.
2. Fine en Download de bestjoerders dy't oerienkomme mei de Windows-ferzje op jo PC.
3. Once downloaded, double click on the ynladen triem and follow the given instructions to install it.
Lês ek: How to set up a VPN on Windows 10
Metoade 10: Update Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Druk op de Windows + ik kaaien tegearre te iepenjen ynstellings op jo kompjûter.
2. Útkieze Update & befeiliging.
3. Útkieze Kontrolearje op fernijings.
4A. Click Ynstallearje no to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Do bist by de tiid berjocht.
Metoade 11: Resinte updates wiskje
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Hâld drukke Windows + R-kaaien tegearre te iepenjen de run dialoochfinster.
2. Type appwiz.cpl en rekke Yngean.
3. Klik op Besykje fernijende fernijings.
4. Select the most recent update and click on -ynstallaasje.
5. Confirm the prompt, if any, and reboot de PC.
Lês ek: Hoe kinne jo Firefox reparearje net laden fan siden
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Noat: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to ynstellings dan Systeem en Oer. Once you have reset your network, you have to reinstall all networking software lykas VPN kliïnten or Firtuele skakelaars.
1. Hâld drukke Windows + I toetsen tegearre te iepenjen Windows ynstellings.
2. Klik op Netwurk en ynternet.
3. Klik op Netwurk reset ûnder Status.
4. Befêstigje de prompt troch te klikken op Reset now.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
recommended:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.