Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Op 'e nij opstarte en selektearje it juste bootapparaatprobleem [SOLVED]
Metoade 1: Stel de juste bootfolchoarder yn
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. As jo kompjûter opstart (Foar it opstartskerm of it flaterskerm), druk ferskate kearen op Delete of F1- of F2-toets (Ofhinklik fan de fabrikant fan jo kompjûter) om enter BIOS opset.
2.As jo ienris yn BIOS opset binne, selektearje Boot ljepper út 'e list mei opsjes.
3.Now soargje derfoar dat de kompjûter Hurde skiif of SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, sa net trochgean.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Om Diagnostics út te fieren, start jo PC op 'e nij en as de kompjûter begjint (foar it opstartskerm), drukke op F12-kaai en as it Bootmenu ferskynt, markearje de opsje Boot nei Utility Partition of de Diagnostics-opsje en druk op enter om de Diagnostyk te begjinnen. Dit sil automatysk alle hardware fan jo systeem kontrolearje en rapportearje as ien probleem fûn wurdt.
recommended: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Belangryk: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Foegje de Windows 10 bootbere ynstallaasje DVD yn en start jo PC opnij.
2.Wannear't jo frege wurde om elke kaai te drukken om te booten fan CD of DVD, druk dan op elke kaai om troch te gean.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart en jo hawwe mei súkses Fix Reboot and Select Proper Boot Device issue, sa net, trochgean.
Lês ek Hoe reparearje Automatyske reparaasje koe jo PC net reparearje.
Metoade 5: UEFI Boot ynskeakelje
1.Start jo PC opnij en tap F2 of DEL ôfhinklik fan jo PC om Boot Setup te iepenjen.
2.The make the following changes:
Feroarje Bootlist-opsje nei UEFI Utskeakelje Load Legacy-opsje ROM Secure boot ynskeakelje
3.Next, tik op F10 om de opstartynstelling te bewarjen en út te gean.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Noat: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metoade 7: Reparearje Ynstallearje Windows 10
As gjin fan 'e boppesteande oplossingen foar jo wurket, dan kinne jo der wis fan wêze dat jo HDD goed is, mar jo kinne de flater sjen "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” om't it bestjoeringssysteem as de BCD-ynformaasje op 'e HDD op ien of oare manier wiske waard. No, yn dit gefal kinne jo besykje om Windows te reparearjen, mar as dit ek mislearret, dan is de ienige oplossing dy't oerbleaun is om in nije kopy fan Windows te ynstallearjen (skjinne ynstallaasje).
Dat is it dat jo mei sukses hawwe Meitsje Reboot and Select proper Boot device issue mar as jo noch fragen hawwe oangeande dit berjocht, freegje se dan frij yn 'e kommentaardiel.