When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Outdated Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Gan baintcliceáil ar an Network globe icon, choose your Wi-Fi network and click on Ceangail button. Make sure Modh eitleáin ní iompraítear air.
3. If you again face the same network connection error code, then click on the Dícheangail button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Deaschliceáil ar an Deilbhín Wi-Fi agus roghnaigh Open Network & Internet settings.
6. Cliceáil ar Wi-Fi.
7. Scroll down the right menu, click on Bainistiú a dhéanamh ar líonraí aitheanta.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Déan dearmad.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Nóta: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Faigh an cnaipe Power ar chúl do ródaire.
2. Brúigh an cnaipe uair amháin chun é a mhúchadh.
3. Anois, dhícheangal do Router power cable agus fanacht go dtí go bhfuil an chumhacht draenáilte go hiomlán ó na toilleoirí.
4. Ansin, Reconnect an cábla cumhachta agus cuir ar siúl é tar éis nóiméad.
5. Fan go dtí go bhfuil an nasc líonra ath-bunaithe agus bain triail as síniú isteach arís.
Chomh maith leis sin Léigh: Deisigh Ríomhairí nach Léirítear Suas ar an Líonra i Windows 10
Modh 3: Fabhtcheartóir Líonra a Rith
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Buail an Windows eochair agus cineál Socruithe fabhtcheartaithe sa bharra cuardaigh agus Oscailte.
2. Cliceáil ar Fabhtcheartaithe breise.
3. Roghnaigh Líonra Adapter agus cliceáil ar Rith an fabhtcheartaitheoir.
4. Select the network adapter to diagnose agus cliceáil ar Ar Aghaidh.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, cliceáil ar Dún an fabhtcheartóir.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Chomh maith leis sin Léigh: Deisigh Family Sharing YouTube TV Gan Obair
Modh 4: Deisiúchán Comhaid Chórais
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Córas Comhad Checker) /DISM (Seirbhísiú agus Bainistiú Íomhá Imlonnaithe) utilities on your Windows 10 PC.
1. Buail an Windows eochair, cineál Ordú Pras agus cliceáil ar Rith mar riarthóir.
2. Cliceáil ar Is ea sa Úsáideoir Cuntas Rialaithe go pras.
3. cineál chkdsk C: / f / r / x ordú agus buail Iontráil eochair.
4. Má iarrtar teachtaireacht ort, Ní féidir le Chkdsk rith…tá an toirt… á úsáid, ansin, cineál Y agus bhuail an Iontráil eochair.
5. Arís, clóscríobh an t-ordú: Craobh Sinsear / scannow agus brúigh Iontráil eochair a reáchtáil an Córas Comhad Checker scanadh.
Nóta: Cuirfear tús le scanadh córais agus tógfaidh sé cúpla nóiméad é a chríochnú. Idir an dá linn, is féidir leat leanúint ar aghaidh ag déanamh gníomhaíochtaí eile ach a bheith cúramach gan an fhuinneog a dhúnadh de thaisme.
Tar éis an scanadh a chríochnú, taispeánfaidh sé ceachtar de na teachtaireachtaí seo:
- Níor aimsigh Cosaint Acmhainní Windows aon sáruithe sláine.
- Níorbh fhéidir le Windows Resource Protection an oibríocht iarrtha a dhéanamh.
- D'aimsigh Cosaint Acmhainní Windows comhaid truaillithe agus deisíodh iad go rathúil.
- Fuair Cosaint Acmhainní Windows comhaid truaillithe ach ní raibh siad in ann roinnt acu a shocrú.
6. Nuair a bheidh an scanadh críochnaithe, atosú do ríomhaire.
7. Arís, seoladh Treoraíonn an Ceannasaíocht mar riarthóir agus déan na horduithe tugtha ceann i ndiaidh a chéile:
dism.exe /Online /cleanup-image/scanhealth dism.exe /Online /cleanup-image/restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Nóta: Ní mór nasc idirlín oibre a bheith agat chun orduithe DISM a fhorghníomhú i gceart.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Buail an Windows eochair agus cineál Bainisteoir gléas in the Windows search menu. Click on Oscail.
2. Leathnaigh an adapters líonra alt trí chliceáil faoi dhó air.
3. Deaschliceáil ar do Tiománaí líonra (mar shampla, Intel (R) Dual Band Wireless-AC 3168) agus roghnaigh an Díchumasaigh an gléas rogha.
4. Confirm the below prompt by clicking on Is ea.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Cumasaigh an gléas rogha.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Chomh maith leis sin Léigh: Níorbh fhéidir le Fix Windows socruithe seachfhreastalaí an Líonra seo a bhrath go huathoibríoch
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Téigh go dtí an roghchlár cuardaigh agus cineál IE. Cliceáil ar Rith mar riarthóir.
2. Clóscríobh an méid seo a leanas orduithe agus bhuail an Iontráil eochair.
athshocrú winsock netsh athshocrú IP ipconfig / Preaseisiúint ipconfig / athnuachan
3. Fan go ndéanfar na horduithe a fhorghníomhú agus Atosaigh do ríomhaire.
Modh 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Seoladh Ordú Pras by searching in the Windows roghchlár and click on Run as administrator.
2. cineál ipconfig / flushdns in the command window and hit Iontráil.
Chomh maith leis sin Léigh: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Seoladh an Rith bosca dialóige ag an cnaipe Eochracha Windows + R le chéile.
2. cineál ncpa.cpl agus bhuail Iontráil eochair.
3. Right-click on your active cuibheoir líonra agus cliceáil ar Airíonna.
4. Díthiceáil an Prótacal Idirlín Leagan 6 (TCP / IPv6) rogha.
5. Ar deireadh, cliceáil ar OK to save the changes and check if the issue is resolved.
Nóta: If you use multiple network connections, navigate to Líonra agus Roinnt Center agus Athraigh cuibheoir settings. Right-click on the adapter and select díchumasaigh. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. cineál Bainisteoir gléas in the Windows search menu and click Oscail.
2. Cliceáil faoi dhó ar an adapters líonra chun é a leathnú.
3. Deaschliceáil ar do tiománaí (m.sh. Sreang Dual-AC 3168 Intel (R)) agus cliceáil Tiománaí nuashonraithe.
4. Cliceáil ar Brabhsáil mo ríomhaire le haghaidh tiománaithe to locate and install a driver manually.
5. Cliceáil ar an bhrabhsálaí button to choose any directory and click on Ar Aghaidh.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Tá na tiománaithe is fearr do do ghléas suiteáilte cheana féin.
6. Cliceáil ar Dún chun an fhuinneog a fhágáil.
7. Atosaigh the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Seoladh Bainisteoir gléas from the Windows search menu.
2. Deaschliceáil ar an tiománaí agus roghnaigh Feiste dhíshuiteáil.
3. A warning prompt will be displayed on the screen. Check the box “Scrios na bogearraí tiománaí don fheiste seo” and confirm the prompt by clicking Díshuiteáil.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Tabhair cuairt ar an suíomh Gréasáin an mhonaróra.
2. Aimsigh agus íoslódáil na tiománaithe a fhreagraíonn don leagan Windows ar do ríomhaire.
3. Once downloaded, double click on the comhad íoslódáilte and follow the given instructions to install it.
Chomh maith leis sin Léigh: How to set up a VPN on Windows 10
Modh 10: Nuashonraigh Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Brúigh an Windows + I eochracha le chéile a oscailt Socruithe ar do ríomhaire.
2. Roghnaigh Nuashonrú & Slándáil.
3. Roghnaigh Seiceáil do Nuashonruithe.
4A. Click Suiteáil anois to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Tá tú suas chun dáta teachtaireacht.
Modh 11: Díshuiteáil Nuashonruithe Déanaí
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Brúigh agus coinnigh Eochracha Windows + R le chéile chun an Rith dialóg.
2. cineál appwiz.cpl agus bhuail Iontráil.
3. Cliceáil ar Féach nuashonruithe suiteáilte.
4. Select the most recent update and click on Díshuiteáil.
5. Confirm the prompt, if any, and atosaigh an ríomhaire.
Chomh maith leis sin Léigh: Conas Firefox Gan Leathanaigh a Luchtú a Dheisigh
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the oiriúnaitheoirí líonra installed in your PC along with their settings. All the stored settings are stored to default settings.
Nóta: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Socruithe ansin córas agus Maidir. Once you have reset your network, you have to reinstall all networking software cosúil Cliaint VPN or Lasca fíorúil.
1. Brúigh agus coinnigh Eochracha Windows + I le chéile a oscailt Socruithe Windows.
2. Cliceáil ar Líonra & Idirlíon.
3. Cliceáil ar Athshocraigh an líonra faoi stádas.
4. Deimhnigh an leid trí chliceáil ar Athshocraigh anois.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Molta:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.