Sometimes, when you connect to any limited network, you may end up with No internet, secured prompt. So, when you run Network diagnostics tool, the error code 0x00028001 will prompt on the screen. The most common reason for this error code is your network is being connected to a limited WiFi connection network. If you are also facing network error code 0x00028001, this guide will help you resolve the same. So, continue reading.
How to Fix Network Error 0x00028001 on Windows 10
You may wonder why network error 0x00028001 occurs on Windows 10. Here are some valid reasons that trigger this problem in your device.
- Infrastructure failure of your Windows 10 PC.
- Network connection is very bad.
- The cable connecting the router and the modem are damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between router and your device.
- Outdated network drivers.
In this section, we have gathered some potential fixes that will help you fix 0x00028001 error code. Follow as instructed to attain perfect outcomes.
Nóta: Always ensure you create a System restore point to restore your PC if something goes wrong.
Modhanna Bunúsacha um Fhabhtcheartú
Follow the basic troubleshooting steps listed below before going through the advanced methods.
1. Atosaigh PC
1. Brúigh an Eochracha Alt + F4 le chéile chun an Shut Down Windows fhuinneog.
2. Roghnaigh an Atosaigh rogha agus buail an Iontráil eochair.
2. Ensure Strong Network Signal
You will not face any connectivity issues in your Windows 10 computer only if you have a strong network connection. If there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems.
1. Bog do ródaire to some other place and check the internet connectivity.
2. Find the signal strength of your network and if it is very low, clear all the obstructions in between the way.
3. Avoid too many devices ceangailte leis an líonra céanna.
4. Seachain cur isteach gan sreang from devices like wireless headphones, head sets, TV and a lot more.
5. Move your PC closer to the router and check if the error recurs again.
3. Ródaire a Atosú
This is a simple work around that will help you fix 0x00028001 error code within simple steps. This also ensures a strong and reliable network connection. Follow the below mentioned steps to restart your router. By doing so, you will establish a fresh internet connection between the client and the server. You can restart your router by following our guide Restart Router or Modem. Once your router has restarted, check if you can have fixed the error.
Chomh maith leis sin Léigh: Deisigh Uimh Líonraí Wifi Aimsíodh i Windows 10
4. Reconnect to Internet
This is another simple workaround that fixes 0x00028001 error code. Your computer must connect either to Ethernet or to Wi-Fi network at a time. Check if this condition applies to your computer and if you guess any interruptions between your wired and wireless connections, reconnect them as instructed below.
1. Dícheangail your network connection, wait for a while and reconnect it again.
2. Má tá an Cábla Ethernet is plugged in, remove it from your PC. Then, reconnect it or connect it to a Wi-Fi network. This will ensure there is no flickering between the wired and wireless connections.
5. Díchumasaigh Mód Eitleán
Enabling Airplane mode will disable WiFi, Bluetooth, cellular mode, all radio services, etc. Thus, you are advised to disable airplane mode to fix 0x00028001 error code. Usually, there is a dedicated key on your keyboard to enable or disable Airplane mode. Hit the key to do the same or implement the below-listed instructions.
1. Brúigh agus coinnigh Windows + A keys le chéile a oscailt Lárionad Gníomhartha. Seiceáil an bhfuil an Modh eitleáin Tá sé ar siúl.
2A. If Modh eitleáin is turned on, click on the setting to turn it off.
2B. If the Modh eitleáin is not turned on, skip to the next method.
6. Enable Wi-Fi Connection
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face 0x00028001 error code. But, there are a few simple instructions to enable WiFi on your computer.
1. Téigh go dtí an Rith bosca dialóige ag an cnaipe Eochracha Windows + R le chéile.
2. cineál ncpa.cpl agus bhuail Iontráil eochair.
3. Now, right-click on your active cuibheoir líonra and check whether it is enabled or disabled.
3A. Cliceáil ar Cumasaigh if the status is disabled.
3B. If the stádas is already in Enable, move to the next method.
Check if you have fixed 0x00028001 error code is fixed.
Chomh maith leis sin Léigh: How to Troubleshoot Network Connectivity Problems on Windows 10
Method 1: Restart Windows Explorer Process
Some users have reported that restarting Windows Explorer processes will help to resolve 0x00028001 error code. Follow the below-listed instructions to do the same.
1. Buail an Eochracha Ctrl + Shift + Esc le chéile a oscailt Bainisteoir tasc.
2. Sa próisis tab, cliceáil ar Windows Explorer agus roghnaigh an Atosaigh cnaipe.
3. Now, Windows Explorer restarts and 0x00028001 error code will be fixed now.
Modh 2: Fabhtcheartóir Líonra a Rith
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix 0x00028001 error code. Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed 0x00028001 error code.
Chomh maith leis sin Léigh: Conas Socruithe Líonra ar Windows 10 a Athshocrú
Method 3: Exit All Background Processes
If there are a bulk of background processes in your Windows 10 computer, you cannot access the network that easy, since all those processes will take a share of the network. Also, RAM consumption will be more and the performance of the device will slow down apparently. Follow our guide How to End Task in Windows 10 to close all other background processes in your Windows 10 PC.
After closing all the background processes, check if 0x00028001 error code is fixed or not.
Modh 4: Deisiúchán Comhaid Chórais
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing 0x00028001 error code very recently, there are some chances that your computer files have become corrupt or damaged. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
Chomh maith leis sin Léigh: Deisigh Windows 10 Earráid Scáileáin Ghorm Netwtw04.sys
Modh 5: Rith Scan Malware
Sudden virus or malware attack will result in network problems in your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer. You are advised to scan your computer as instructed in our guide How do I Run a Virus Scan on my Computer?
Also, if you want to remove malware in your computer, check our guide How to Remove Malware from your PC in Windows 10.
Modh 6: Nuashonraigh Windows
You can also eradicate software side bugs in your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update
After updating your Windows Operating System, check whether you can connect to your network.
Chomh maith leis sin Léigh: Deisigh Ríomhairí nach Léirítear Suas ar an Líonra i Windows 10
Modh 7: Díchumasaigh VPN agus Seachfhreastalaí
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face 0x00028001 error code. If you have installed any VPN service or use proxy servers on your PC, read our How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed 0x00028001 error code. Still, if you face the same problem, try connecting to a hotspot soghluaiste.
Method 8: Reset TCP or IP Protocol
TCP (Transmission Control Protocol) is an essential network connection protocol that allots and identifies rialacha agus caighdeán procedures over the internet. TCP/IP protocols are responsible for transferring data packets from the sender and the receiver. If there is a conflict in the process, resetting the protocol along with the IP address will help you fix the discussed issue. Follow our guide on How to Troubleshoot Network Connectivity Problems on Windows 10 to reset TCP/IP.
After implementing the steps, check if you can fix network keeps dropping or not.
Modh 9: Bain úsáid as Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix 0x00028001 error code. To do so, follow our guide on How to change DNS settings in Windows 10.
Chomh maith leis sin Léigh: How to Change DNS Server Settings on Windows 11
Method 10: Disable Power Saving Mode
Sometimes, you may face 0x00028001 error code if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1. Buail an Windows eochair, cineál Bainisteoir gléas agus cliceáil ar Oscail.
2. Now, double-click on the adapters líonra alt seo.
3. Ansin, deaschliceáil ar do Adapter líonra agus roghnaigh an Airíonna rogha mar a thaispeántar.
4. Ansin, aistrigh go dtí an Bainistíocht Cumhacht fuinneog sa Airíonna adapter líonra window and uncheck the box next to Lig don ríomhaire an gléas seo a mhúchadh chun cumhacht a shábháil.
5. Ar deireadh, cliceáil ar OK na hathruithe a shábháil.
Check if you have your computer is out of network connectivity issues.
Method 11: Enable Essential Services
To avoid and prevent 0x00028001 error code occurring in your PC, few essential services must have active status. When there is a problem with any of these services, you will face several conflicts in connecting to a network. Here are a few instructions to check if the essential services are running on your PC.
1. cineál Seirbhísí sa bhosca cuardaigh agus cliceáil ar Oscail.
2. Now, scroll down and search for the Windows EventLog seirbhíse.
3. Seiceáil an stádas na seirbhíse.
3A. If the stádas leagtha amach Rith, right-click on the service and select the stad option. Wait for a while and then click on Tòisich arís.
3B. If the stádas is nach bhfuil leagtha chun Rith, right-click on the service and select the Tòisich rogha.
4. Repeat the above steps for the below seirbhísí freisin.
- Glao ar Nós Imeachta cianda (RPC)
- Windows Update
- DHCP Cliant
- Network Connected Devices Auto-Setup
- Bróicéir Nasc Líonra
- Naisc Líonra
- Network Connectivity Assistant
- Seirbhís Liosta Líonra
- Feasacht ar Shuíomh Líonra
- Network Setup Service
- Seirbhís Chomhéadain Store Líonra
Finally, check if you have fixed the discussed issue.
Chomh maith leis sin Léigh: Níorbh fhéidir le Fix Windows socruithe seachfhreastalaí an Líonra seo a bhrath go huathoibríoch
Modh 12: Díchumasaigh Frithvíreas go Sealadach (Má bhaineann)
Some incompatible antivirus programs installed in your computer will cause network error 0x00028001 error code. To avoid conflicts, you must ensure the security settings of your Windows 10 computer and check if they are stable or not. To find whether the antivirus suite is the reason for network keeps dropping issue, disable it once and try connecting to a network. Read our guide on How to Disable Antivirus Temporarily on Windows 10 and follow the instructions to disable your Antivirus program temporarily on your PC.
If you did not face any internet connectivity issues after disabling the antivirus program in your computer, you are advised to uninstall the program completely from your PC. Read our guide Force Uninstall Programs which won’t Uninstall In Windows 10 to uninstall your antivirus program in your computer.
Modh 13: Díchumasaigh Balla Dóiteáin Windows Defender (Ní mholtar)
Like antivirus program, Windows Defender Firewall in your computer might prevent internet access, for some security reasons. If in case, WiFi network has been blocked by Windows Defender Firewall, you have to enable it or disable the Firewall securities temporarily from your computer. If you do not know how to disable Windows Defender Firewall, our guide How to Disable Windows 10 Firewall will help you do so.
Modh 14: Nuashonraigh Tiománaí Líonra
Always ensure if you are using updated network drivers and if there are any updates pending in action, you are advised to download and install the same. Follow our guide on How to Update Network Adapter Drivers on Windows 10 to do so. Once you have updated your network driver, Atosaigh your computer and test the network connection. You will not 0x00028001 error code again.
Chomh maith leis sin Léigh: Níl Earráid Chumraíochta IP Bhailí ag Deisigh Ethernet
Method 15: Reinstall Network Driver
Still, if you face 0x00028001 error code even after updating network drivers, there is another fix to delete all the drivers in your computer and reinstall them again. This process stabilizes the network connectivity problems thereby resolving network keeps disconnecting Windows 10 issue. Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 to reinstall drivers in your Windows 10 computer.
After reinstalling network drivers, check if you can connect to the network without any problems.
Method 16: Roll Back Network Drivers
All the current versions drivers will be deleted from your PC and previous version of them will be installed when you roll back your network drivers. This is a helpful feature when any new driver is incompatible with the system. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix 0x00028001 error code.
After your Windows 10 computer has installed the previous version of drivers, check if can connect to the network without any interruptions.
Modh 17: Athshocraigh Socruithe Líonra
Tá sé dearbhaithe ag go leor úsáideoirí go réiteoidh athshocrú socruithe líonra ceisteanna aisteacha maidir le nasc líonra. Déanfaidh an modh seo dearmad ar na socruithe cumraíochta líonra go léir, dintiúir shábháilte, agus i bhfad níos mó bogearraí slándála cosúil le VPN agus cláir antivirus. Chun é sin a dhéanamh, lean ár dtreoir ar Conas Socruithe Líonra a Athshocrú ar Windows 10
Chomh maith leis sin Léigh: Conas Comhaid Líonra a Chomhroinnt ar Windows 10 a Shuiteáil
Modh 18: Athchóirigh an Chórais a Fheidhmiú
If you have recently updated your Windows 10 operating system and later facing network error 0x00028001 error code, the latest Windows update components may interfere with any software present in your computer and may cause network keeps disconnecting Windows 10 issue. So, in this case, you must restore your computer to the previous version when it was working fine. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network without any problems.
Modh 19: Athshocraigh ríomhaire
If none of the methods have helped you fix 0x00028001 error code, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Method 20: Contact Internet Service Provider
Last but not the least, you have to seek for technical support if above-listed methods fail to resolve network error 0x00028001 error. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device.
For instance, when you try to register your modem but face troubles during the process, several authentication attempts will slow down your network connection. This will lead to 0x00028001 error. So, in this case you have to contact your Internet Service Provider to diagnose and resolve the problem. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
Molta:
Tá súil againn go raibh an treoir seo cabhrach agus d'fhéadfá a shocrú network error 0x00028001 in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.