Fix External Hard Drive Not Showing Up or Recognized: External hard drives are very useful when you want to increase storage space. They enable you to store data at a place other than your computer’s primary storage and that too at a relatively lower cost. They are easy to use. But, sometimes it may occur that even after connecting your external hard drive to your computer, it doesn’t show up or get recognized. There can be various reasons for your external hard drive not showing up like dead USB ports or driver issues. If your computer fails to detect your external hard drive, here’s what you need to do.
Before you move on to the following methods, you must first ensure that your drive’s power switch is on (if it exists). The lights on the device will indicate that. While most of the external drives are powered over USB itself, some may have a separate power cable. In such a case, you must ensure that the power cable is working fine. If it isn’t working, the power cable or your power outlet may be damaged. If you have checked all of this and your drive doesn’t show up, continue following the given steps.
Fix External Hard Drive Not Showing Up or Recognized
Dèan cinnteach gun cruthaich thu puing ath-nuadhachaidh dìreach air eagal ‘s gun tèid rudeigin ceàrr.
Method 1 – Try Using a Different USB Port Or Computer
Try inserting your hard drive in some other USB port to check if there’s an issue with the USB port itself. If your external hard drive shows up on inserting it in another USB port, then your previous USB port may be dead.
Also, try inserting your hard drive on some other computer. If it doesn’t show up on the other computer as well, there may be a problem with the hard drive. It may even be completely dead and you might need to replace it. This way you will know where exactly the problem lies.
Method 2 – Run Hardware and Devices Troubleshooter
The Windows inbuilt troubleshooter may handle this for you by checking and fixing any hardware or USB related issues, so this one is the foremost step. To let Windows troubleshoot this problem,
1.Search for Troubleshoot in the Windows search field and then click on it. Alternatively, you can access it in the Settings.
2.Scroll down to ‘Bathar-cruaidh is innealan’ and click on it.
3.Cliog air 'Cùm an tubaist-luirg’ under Hardware and Devices.
Method 3 – Enable the External Drive If It Isn’t Already
If your external hard drive like WD My Passport Ultra is not showing up or recognized then it may be caused because it is disabled on your computer. You should ensure that your hard drive is enabled by:
1.Preas Iuchair Windows + R a dh 'fhosgladh Ruith.
2.Type ‘devmgmt.msc’ and click on OK.
3.In the device management window, double click on the type of your external hard drive. It may be located under ‘Drives'no'Universal serial bus controllers'
4.Double-click on your external hard drive to open its Feartan.
5.Now, if you see the ‘Cuir dheth uidheam’ button, then it means the hard disk is already enabled.
6.But if you see ‘Dèan comasach air inneal’ button, then make sure to click on it in order to enable the external hard drive.
Method 4 – Update External Hard Drive Drivers
Ma tha a ' drivers for hard drives are outdated or missing, it can lead to the external hard drive not showing up or recognized. Therefore, you must make sure that the drivers are updated. You can update the drivers manually by searching for the latest version online and downloading them to your computer. For this, you need to gather the required knowledge.
1.Preas Iuchair Windows + R an uairsin tiotal devmgmt.msc and Enter to open Device Manager.
2.Leudaich Drogaichean Diosc or Universal Serial Bus controllers.
3.Now right-click on your External hard drive and select Ùraich draibhear.
4.Choose the option “Rannsaich gu fèin-obrachail airson bathar-bog dràibhear ùrachadh".
5.This will automatically look for and install the updated driver of the hardware from the internet.
6.If the above steps were helpful in fixing the issue then very good, if not then continue.
7.Again right-click on your external hard drive and select “Driver ùrachaidh” but this time on the next screen select “Thoir sùil air a ’choimpiutair agam airson bathar-bog draibhear."
8.Now tagh “Leig leam taghadh bho liosta de dhraibhearan a tha rim faighinn air mo choimpiutair. "
9.Finally, select the latest driver bhon liosta agus briog Air adhart
10.Let the above process finish and restart your PC to save changes.
Method 5 – Create Partitions for your External Drive
If you are connecting your hard drive for the first time, then it is possible that it does not show up because it doesn’t have any partitions. For a previously used hard drive too, partition issues may cause it to not be detected. To partition your drive,
1.Preas Iuchair Windows + R gus an rèis fhosgladh.
2.Type ‘Diskmgmt.msc’ and click on OK.
3.In the disk management window, right-click on the hard drive and select ‘Meud ùr sìmplidh'
4.To complete the process follow this guide.
5.Restart your computer and check if you’re able to fix external hard drive not showing up or recognized issue.
Method 6 – Set Or Change the Drive Letter
Once your drive is correctly partitioned, you must assign a drive letter in order to detect your external hard drive. For this,
1.Preas Iuchair Windows + R gus an rèis fhosgladh.
2.Type ‘Diskmgmt.msc’ and click on OK.
3.In the Disk Management window, deas-cliog on the drive that you want to assign a drive letter.
4.Cliog air 'Change drive letters and paths'
5.If your drive doesn’t have a drive letter already, click on ‘Add’. Otherwise, click on ‘atharrachadh’ to change the drive letter.
6.Select ‘Sònraich an litir dràibhidh a leanas’ radio button.
7.Choose a new letter you want to assign from the drop-down menu and click on Ok.
8.Disconnect and re-insert your external hard drive and check if your external hard drive is now recognized or not.
Method 7 – Format the External Hard Drive
If your drive is partitioned and still does not show up, it may be because it was partitioned or formatted earlier using a different file system or OS and the Windows can’t understand it. To format the drive,
1.Press Windows key + R to open Run then type 'diskmgmt.msc’ agus bhuail Enter.
2.In the disk management window, right-click on the hard drive and select ‘Inneal a 'Chlàir'
Note: This will erase all the contents of the drive. You may need to back up your files using the system which the drive was partitioned in.
3.Type any name which you want to give your drive under Volume label field.
4.Select the file systems from FAT, FAT32, exFAT, NTFS, or ReFS, according to your use.
5.Now bho Meud an aonaid riarachaidh (Cluster size) drop-down make sure to select Default.
6.Check or uncheck “Dèan cruth luath” options depending on whether you want to do a quick format or full format.
7.Next, check or uncheck “Enable file and folder compression” option according to your preference.
8.Finally, review all your choices and then click OK agus a-rithist cliog air OK gus do ghnìomhan a dhearbhadh.
9.Once the Format is complete, you can close Disk Management.
This should definitely fix external hard drive not showing up issue, but if for some reason you’re stuck then follow the next method.
Method 8 – Disable USB Selective Suspend Setting
1.Search for ‘Deasaich plana cumhachd’ in the search field located on your taskbar and open it.
2.Cliog air 'Atharraich roghainnean cumhachd adhartach'
3.Under USB settings, disable ‘Suidheachadh crochte USB roghnach'
4.Click OK followed by Apply to save changes.
5.Reinsert your hard drive and this time it will show up without any issue.
Air a mholadh:
Tha mi an dòchas gu robh an artaigil seo cuideachail agus is urrainn dhut a-nis gu furasta Fix External Hard Drive Not Showing Up or Recognized, ach ma tha ceist sam bith agad fhathast mun oideachadh seo faodaidh tu faighneachd dhaibh anns an earrann bheachdan.