When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Seann siostam-obrachaidh.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ìomhaigh.
2. If the status is set to Gun cheangal, cliog air Network globe icon, choose your Wi-Fi network and click on Ceangail button. Make sure Modh plèana nach eil air a thionndadh air.
3. If you again face the same network connection error code, then click on the Fuasgladh button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Dèan briogadh deas air an Icon Wi-Fi agus tagh Open Network & Internet settings.
6. Cliog air Wi-Fi.
7. Scroll down the right menu, click on Stiùirich lìonraidhean aithnichte.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Dìochuimhnich.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Dòigh 2: Ath-thòisich an router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Note: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Lorg an Putan Cumhachd aig cùl an router agad.
2. Brùth am putan aon uair gu cuir dheth e.
3. A-nis, dì-cheangal agad Router power cable agus feitheamh gus an tèid an cumhachd a dhrèanadh gu tur bho na capacitors.
4. An uairsin, ath-cheangail a ' càball cumhachd agus cuir air adhart e às deidh mionaid.
5. Fuirich gus an tèid an ceangal lìonra ath-stèidheachadh agus feuch ri clàradh a-steach a-rithist.
Cuideachd Leugh: Fix Computers Not Showing Up on Network in Windows 10
Dòigh 3: Ruith Troubleshooter Lìonra
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Buail an Iuchair Windows agus a 'sgrìobhadh Suidhichidhean trioblaideach anns a ’bhàr rannsachaidh agus Fosgailte.
2. Cliog air Luchd-trioblaid a bharrachd.
3. Tagh Adapter Lìonra agus briog air a ' Cùm an tubaist-luirg.
4. Select the network adapter to diagnose agus briog air a ' An ath-.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, cliog air Dùin an trioblaid.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Cuideachd Leugh: Socraich teaghlach a’ roinneadh Tbh YouTube nach eil ag obair
Dòigh 4: Càradh System Files
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Siostam File System) /DISM (Dealbhadh agus Dealbhadh Ìomhaighean Cleachdaidh) utilities on your Windows 10 PC.
1. Buail an Iuchair Windows, seòrsa Pìos a 'Cheannaird agus briog air a ' Rach mar rianaire.
2. Cliog air Tha Anns a’ Smachd cunntas cleachdaiche grad.
3. Seòrsa chkdsk C: / f / r / x àithne agus buail Cuir a-steach iuchair.
4. Ma tha thu air do bhrosnachadh le teachdaireachd, Chan urrainn dha chkdsk ruith…tha an tomhas-lìonaidh… ann am pròiseas cleachdaidh, an uairsin, seòrsa Y agus bhuail a ' Cuir a-steach iuchair.
5. A-rithist, dèan an àithne a leanas: sfc / scannow agus pàipearan-naidheachd Cuir a-steach iuchair ruith Siostam File System scan.
Note: Thèid sgrùdadh siostam a thòiseachadh agus bheir e mionaid no dhà airson a chrìochnachadh. Aig an aon àm, faodaidh tu leantainn air adhart a’ coileanadh ghnìomhan eile ach thoir an aire nach dùin thu an uinneag gun fhiosta.
Às deidh an scan a chrìochnachadh, seallaidh e gin de na teachdaireachdan sin:
- Cha do lorg Dìon Ghoireasan Windows brisidhean iomlanachd.
- Cha b' urrainn do Windows Resource Protection an gnìomh a chaidh iarraidh a choileanadh.
- Lorg Windows Resource Protection faidhlichean coirbte agus chaidh an càradh gu soirbheachail.
- Lorg Windows Resource Protection faidhlichean coirbte ach cha robh e comasach dhaibh cuid dhiubh a chàradh.
6. Nuair a bhios an scan deiseil, ath-thòisich do PC.
7. A rìs, cuir air bhog Spreagadh an Comannd mar rianaire agus cuir an gnìomh na h-àitheantan a thugadh aon an dèidh a chèile:
dism.exe /Online/cleanup-image/scanhealth dism.exe /Online/cleanup-image/restorehealth dism.exe /Online/cleanup-image/startcomponentcleanup
Note: Feumaidh ceangal eadar-lìn obrach a bhith agad gus òrdughan DISM a chuir an gnìomh gu ceart.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Buail an Iuchair Windows agus a 'sgrìobhadh Neach-stiùiridh in the Windows search menu. Click on Open.
2. Leudaich an Adaptters lìonra earrann le bhith a’ briogadh dùbailte air.
3. Dèan briogadh deas air do Dràibhear lìonra (mar eisimpleir, Intel (R) Dual Band Wireless-AC 3168) agus tagh e Cuir dheth uidheam roghainn.
4. Confirm the below prompt by clicking on Tha.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Dèan comasach air inneal roghainn.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Cuideachd Leugh: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Rach don chlàr-rannsachaidh agus dèan seòrsa cmdS an Iar- Cliog air Rach mar rianaire.
2. Taidhp na leanas òrdughan agus bhuail a ' Cuir a-steach iuchair.
ath-shuidheachadh netsh winsock ath-shuidheachadh netsh int ip ipconfig / release ipconfig / renew
3. Fuirich airson na h-àitheantan a chur gu bàs agus ath-thòisich do PC.
Dòigh 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Launch Pìos a 'Cheannaird by searching in the Windows taice and click on Run as administrator.
2. Seòrsa ipconfig / flushdns in the command window and hit Cuir a-steach.
Cuideachd Leugh: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Cuir air bhog an Run bogsa deasbaid le putadh Iuchraichean Windows + R còmhla.
2. Seòrsa ncpa.cpl agus bhuail e Cuir a-steach iuchair.
3. Right-click on your active adapter lìonra agus briog air a ' Properties.
4. Uncheck an Pròtacal Eadar-lìn Tionndadh 6 (TCP / IPv6) roghainn.
5. Mu dheireadh, cliog air OK to save the changes and check if the issue is resolved.
Note: If you use multiple network connections, navigate to Ionad Lìonra is Roinnte agus Atharraich adapter settings. Right-click on the adapter and select Disable. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Seòrsa Neach-stiùiridh in the Windows search menu and click Open.
2. Dèan briogadh dùbailte air an Adaptters lìonra gus a leudachadh.
3. Dèan briogadh deas air do dràibhear (me Intel(R) Dual Band Wireless-AC 3168) agus cliog Ùraich an dràibhear.
4. Cliog air Thoir sùil air a ’choimpiutair agam airson draibhearan to locate and install a driver manually.
5. Cliog air a 'phutan Browser button to choose any directory and click on An ath-.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Ma tha iad mu thràth ann an ìre ùraichte, tha an sgrion a’ taisbeanadh na teachdaireachd a leanas, Tha na draibhearan as fheàrr airson an inneal agad air an stàladh mu thràth.
6. Cliog air Dùin gus an uinneag fhàgail.
7. Ath-thòisich the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Launch Neach-stiùiridh from the Windows search menu.
2. Dèan briogadh deas air an dràibhear agus tagh Inneal dì-stàlaidh.
3. A warning prompt will be displayed on the screen. Check the box “Thoir às am bathar-bog dràibhear airson an inneal seo” and confirm the prompt by clicking dì-stàlaich.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Tadhail air an làrach-lìn an neach-dèanamh.
2. lorg agus Luchdaich a-nuas na draibhearan a tha co-chosmhail ris an tionndadh Windows air do PC.
3. Nuair a luchdachadh a-nuas, cliog dùbailte air an faidhle air a luchdachadh sìos agus lean an stiùireadh a chaidh a thoirt seachad airson a stàladh.
Cuideachd Leugh: Mar a shuidhicheas tu VPN air Windows 10
Dòigh 10: Ùraich Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Brùth air an Windows + I. iuchraichean còmhla gus fhosgladh roghainnean air do choimpiutair.
2. Tagh Ùrachadh & Tèarainteachd.
3. Tagh Dèan cinnteach airson ùrachaidhean.
4A. Click Stàlaich an-dràsta gus an ùrachadh as ùire a tha ri fhaighinn a luchdachadh sìos agus a stàladh.
4B. Ma tha an siostam agad ùraichte mu thràth, seallaidh e Tha thu air ùrachadh teachdaireachd.
Dòigh 11: Dì-stàlaich ùrachaidhean o chionn ghoirid
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Brùth agus gleidhidh Iuchraichean Windows + R còmhla gus am fosgladh Run bogsa còmhraidh.
2. Seòrsa appwiz.cpl agus bhuail e Cuir a-steach.
3. Cliog air Seall ùrachaidhean a chaidh a stàladh.
4. Select the most recent update and click on dì-stàlaich.
5. Confirm the prompt, if any, and ath-thòisich am PC.
Cuideachd Leugh: Mar a shocraicheas tu Firefox gun a bhith a’ luchdachadh dhuilleagan
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Note: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to roghainnean an uair sin System agus Mu dheidhinn. Once you have reset your network, you have to reinstall all networking software mar Luchd-dèiligidh VPN or Mas-fhìor suidsichean.
1. Brùth agus gleidhidh Iuchraichean Windows + I. còmhla gus fhosgladh Roghainnean Windows.
2. Cliog air Lìonra & Eadar-lìn.
3. Cliog air Ath-shuidheachadh lìonra fo inbhe.
4. Dearbhaich an luath le bhith a 'briogadh air Aisig a-nis.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Air a mholadh:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.