Sometimes, when you connect to any limited network, you may end up with No internet, secured prompt. So, when you run Network diagnostics tool, the error code 0x00028001 will prompt on the screen. The most common reason for this error code is your network is being connected to a limited WiFi connection network. If you are also facing network error code 0x00028001, this guide will help you resolve the same. So, continue reading.
How to Fix Network Error 0x00028001 on Windows 10
You may wonder why network error 0x00028001 occurs on Windows 10. Here are some valid reasons that trigger this problem in your device.
- Infrastructure failure of your Windows 10 PC.
- Network connection is very bad.
- The cable connecting the router and the modem are damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between router and your device.
- Seann draibhearan lìonraidh.
In this section, we have gathered some potential fixes that will help you fix 0x00028001 error code. Follow as instructed to attain perfect outcomes.
Note: Dèan cinnteach an-còmhnaidh gun cruthaich thu puing ath-nuadhachadh siostaim gus do PC a thoirt air ais ma thèid rudeigin ceàrr.
Dòighean Fuasgladh Cheistean Bunasach
Follow the basic troubleshooting steps listed below before going through the advanced methods.
1. Ath-thòisich PC
1. Brùth air an Alt + F4 iuchraichean còmhla gus am fosgladh Dùin Windows uinneig.
2. Tagh an Ath-thòisich roghainn agus bhuail an Cuir a-steach iuchair.
2. Ensure Strong Network Signal
You will not face any connectivity issues in your Windows 10 computer only if you have a strong network connection. If there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems.
1. Gluais an router agad to some other place and check the internet connectivity.
2. Find the signal strength of your network and if it is very low, clear all the obstructions in between the way.
3. Avoid too many devices ceangailte ris an aon lìonra.
4. Seachain eadar-theachd gun uèir from devices like wireless headphones, head sets, TV and a lot more.
5. Move your PC closer to the router and check if the error recurs again.
3. Ath-thòiseachadh Router
This is a simple work around that will help you fix 0x00028001 error code within simple steps. This also ensures a strong and reliable network connection. Follow the below mentioned steps to restart your router. By doing so, you will establish a fresh internet connection between the client and the server. You can restart your router by following our guide Restart Router or Modem. Once your router has restarted, check if you can have fixed the error.
Cuideachd Leugh: Ceartaich Cha deach lìonraidhean WiFi a lorg ann Windows 10
4. Reconnect to Internet
This is another simple workaround that fixes 0x00028001 error code. Your computer must connect either to Ethernet or to Wi-Fi network at a time. Check if this condition applies to your computer and if you guess any interruptions between your wired and wireless connections, reconnect them as instructed below.
1. Fuasgladh do cheangal lìonraidh, fuirich airson greis agus ath-cheangail e a-rithist.
2. Ma tha an Ceangal Ethernet air a phlugadh a-steach, thoir air falbh e bhon PC agad. An uairsin, ath-cheangail e no ceangail e ri lìonra Wi-Fi. Nì seo cinnteach nach bi priobadh sam bith eadar na ceanglaichean uèirleas agus uèirleas.
5. Disable Airplane Mode
Enabling Airplane mode will disable WiFi, Bluetooth, cellular mode, all radio services, etc. Thus, you are advised to disable airplane mode to fix 0x00028001 error code. Usually, there is a dedicated key on your keyboard to enable or disable Airplane mode. Hit the key to do the same or implement the below-listed instructions.
1. Brùth agus gleidhidh Iuchraichean Windows + A còmhla gus fhosgladh Ionad Gnìomh. Thoir sùil air a bheil an Modh plèana air a thionndadh.
2A. If Modh plèana is turned on, click on the setting to turn it off.
2B. If the Modh plèana is not turned on, skip to the next method.
6. Enable Wi-Fi Connection
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face 0x00028001 error code. But, there are a few simple instructions to enable WiFi on your computer.
1. Seòl chun an Run bogsa deasbaid le putadh Iuchraichean Windows + R còmhla.
2. Seòrsa ncpa.cpl agus bhuail e Cuir a-steach iuchair.
3. Now, right-click on your active adapter lìonra agus dèan cinnteach a bheil e comasach no ciorramach.
3A. Cliog air Ceadaich if the status is disabled.
3B. If the inbhe is already in Enable, move to the next method.
Check if you have fixed 0x00028001 error code is fixed.
Cuideachd Leugh: How to Troubleshoot Network Connectivity Problems on Windows 10
Method 1: Restart Windows Explorer Process
Some users have reported that restarting Windows Explorer processes will help to resolve 0x00028001 error code. Follow the below-listed instructions to do the same.
1. Buail an Iuchraichean Ctrl + Shift + Esc còmhla gus fhosgladh Manaidsear Gnìomha.
2. Anns a Pròiseasan tab, cliog air Windows Explorer agus tagh e Ath-thòisich putan.
3. Now, Windows Explorer restarts and 0x00028001 error code will be fixed now.
Dòigh 2: Ruith Troubleshooter Lìonra
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix 0x00028001 error code. Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed 0x00028001 error code.
Cuideachd Leugh: Mar a nì thu ath-shuidheachadh roghainnean lìonra air Windows 10
Dòigh 3: Cuir a-mach a h-uile pròiseas cùl-fhiosrachaidh
If there are a bulk of background processes in your Windows 10 computer, you cannot access the network that easy, since all those processes will take a share of the network. Also, RAM consumption will be more and the performance of the device will slow down apparently. Follow our guide How to End Task in Windows 10 to close all other background processes in your Windows 10 PC.
After closing all the background processes, check if 0x00028001 error code is fixed or not.
Dòigh 4: Càradh System Files
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing 0x00028001 error code very recently, there are some chances that your computer files have become corrupt or damaged. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
Cuideachd Leugh: Ceartaich Windows 10 Mearachd Sgrion Gorm Netwtw04.sys
Dòigh 5: Ruith Malware Scan
Sudden virus or malware attack will result in network problems in your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer. You are advised to scan your computer as instructed in our guide How do I Run a Virus Scan on my Computer?
Cuideachd, ma tha thu airson malware a thoirt air falbh sa choimpiutair agad, thoir sùil air an stiùireadh againn Mar a bheir thu air falbh Malware bhon PC agad Windows 10.
Dòigh 6: Ùraich Windows
You can also eradicate software side bugs in your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update
Às deidh dhut an siostam obrachaidh Windows agad ùrachadh, dèan cinnteach an urrainn dhut ceangal ris an lìonra agad.
Cuideachd Leugh: Ceartaich coimpiutairean nach eil a’ nochdadh air an lìonra ann an Windows 10
Dòigh 7: Cuir à comas VPN agus frithealaiche proxy
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face 0x00028001 error code. If you have installed any VPN service or use proxy servers on your PC, read our How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed 0x00028001 error code. Still, if you face the same problem, try connecting to a hotspot gluasadach.
Method 8: Reset TCP or IP Protocol
Tha TCP (Transmission Control Protocol) na phròtacal ceangail lìonra riatanach a bhios a’ comharrachadh agus a’ comharrachadh riaghailtean agus ìre modhan-obrach thairis air an eadar-lìon. Tha uallach air protocolaidhean TCP/IP airson pacaidean dàta a ghluasad bhon neach a chuir e agus bhon neach-gabhail. Ma tha còmhstri sa phròiseas, cuidichidh ath-shuidheachadh a’ phròtacal còmhla ris an t-seòladh IP thu gus a’ chùis a chaidh a dheasbad a cheartachadh. Lean an stiùireadh againn air Mar a nì thu trioblaid air duilgheadasan ceangail lìonraidh air Windows 10 gus TCP / IP ath-shuidheachadh.
After implementing the steps, check if you can fix network keeps dropping or not.
Dòigh 9: Cleachd Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix 0x00028001 error code. To do so, follow our guide on How to change DNS settings in Windows 10.
Cuideachd Leugh: Mar a dh’ atharraicheas tu roghainnean frithealaiche DNS air Windows 11
Method 10: Disable Power Saving Mode
Sometimes, you may face 0x00028001 error code if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1. Buail an Iuchair Windows, seòrsa Neach-stiùiridh agus briog air a ' Open.
2. A-nis, dèan briogadh dùbailte air an Adaptters lìonra earrann.
3. An uair sin, deas-cliog air do Adapter lìonraidh agus tagh e Properties roghainn mar a chithear.
4. An uairsin, gluais chun an Stiùireadh cumhachd window in the Network adapter properties window and uncheck the box next to Leig leis a 'choimpiutair an inneal seo a thionndadh gus cumhachd a shàbhaladh.
5. Mu dheireadh, cliog air OK gus na h-atharrachaidhean a shàbhaladh.
Check if you have your computer is out of network connectivity issues.
Method 11: Enable Essential Services
To avoid and prevent 0x00028001 error code occurring in your PC, few essential services must have active status. When there is a problem with any of these services, you will face several conflicts in connecting to a network. Here are a few instructions to check if the essential services are running on your PC.
1. Seòrsa seirbheisean anns a’ bhogsa sgrùdaidh agus cliog air Open.
2. Now, scroll down and search for the Windows EventLog seirbheis.
3. Thoir sùil air an inbhe den t-seirbheis.
3A. If the inbhe air a shuidheachadh Running, right-click on the service and select the stad option. Wait for a while and then click on Start a-rithist.
3B. If the inbhe is chan eil air a chuir air dòigh Running, right-click on the service and select the Start roghainn.
4. Repeat the above steps for the below seirbheisean cuideachd.
- Call modh-obrach iomallach (RPC)
- Ùrachadh Windows
- Cliant DHCP
- Network Connected Devices Auto-Setup
- Broker Ceangal Lìonra
- Ceanglaichean Lìonra
- Network Connectivity Assistant
- Seirbheis Liosta Lìonra
- Mothachadh air Suidheachadh Lìonra
- Network Setup Service
- Seirbheis eadar-aghaidh lìonra stòr
Finally, check if you have fixed the discussed issue.
Cuideachd Leugh: Cha b’ urrainn Fix Windows roghainnean an lìonraidh seo a lorg gu fèin-obrachail
Dòigh 12: Cuir à comas Antivirus gu sealach (ma tha sin iomchaidh)
Some incompatible antivirus programs installed in your computer will cause network error 0x00028001 error code. To avoid conflicts, you must ensure the security settings of your Windows 10 computer and check if they are stable or not. To find whether the antivirus suite is the reason for network keeps dropping issue, disable it once and try connecting to a network. Read our guide on How to Disable Antivirus Temporarily on Windows 10 and follow the instructions to disable your Antivirus program temporarily on your PC.
If you did not face any internet connectivity issues after disabling the antivirus program in your computer, you are advised to uninstall the program completely from your PC. Read our guide Force Uninstall Programs which won’t Uninstall In Windows 10 to uninstall your antivirus program in your computer.
Dòigh 13: Cuir à comas balla-teine Windows Defender (Gun mholadh)
Like antivirus program, Windows Defender Firewall in your computer might prevent internet access, for some security reasons. If in case, WiFi network has been blocked by Windows Defender Firewall, you have to enable it or disable the Firewall securities temporarily from your computer. If you do not know how to disable Windows Defender Firewall, our guide How to Disable Windows 10 Firewall will help you do so.
Dòigh 14: Ùraich an lìonra driver
Dèan cinnteach an-còmhnaidh ma tha thu a’ cleachdadh draibhearan lìonra ùraichte agus ma tha ùrachadh sam bith a’ feitheamh ri gnìomh, thathas a’ moladh dhut an aon rud a luchdachadh sìos agus a stàladh. Lean an stiùireadh againn air Mar a bheir thu ùrachadh air draibhearan adapter lìonra air Windows 10 sin a dhèanamh. Aon uair 's gu bheil thu air an draibhear lìonra agad ùrachadh, reboot your computer and test the network connection. You will not 0x00028001 error code again.
Cuideachd Leugh: Fix Ethernet Chan eil Mearachd Rèiteachaidh IP Dligheach aige
Dòigh 15: Ath-stàlaich an lìonra driver
Still, if you face 0x00028001 error code even after updating network drivers, there is another fix to delete all the drivers in your computer and reinstall them again. This process stabilizes the network connectivity problems thereby resolving network keeps disconnecting Windows 10 issue. Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 to reinstall drivers in your Windows 10 computer.
Às deidh dhut draibhearan lìonra ath-shuidheachadh, dèan cinnteach an urrainn dhut ceangal ris an lìonra gun duilgheadas sam bith.
Dòigh 16: Roll air ais draibhearan lìonra
All the current versions drivers will be deleted from your PC and previous version of them will be installed when you roll back your network drivers. This is a helpful feature when any new driver is incompatible with the system. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix 0x00028001 error code.
Às deidh do Windows 10 tha coimpiutair air an dreach roimhe de dhraibhearan a chuir a-steach, thoir sùil an urrainn dha ceangal ris an lìonra gun bhriseadh sam bith.
Dòigh 17: Ath-shuidhich roghainnean lìonra
Tha grunn luchd-cleachdaidh air innse sin, le bhith ag ath-shuidheachadh roghainnean lìonra fuasglaidh cùisean ceangail lìonra neònach. Dìochuimhnichidh an dòigh seo a h-uile suidheachadh rèiteachaidh lìonra, teisteanasan sàbhalaidh, agus tòrr a bharrachd bathar-bog tèarainteachd leithid VPN agus prògraman antivirus. Gus sin a dhèanamh, lean an stiùireadh againn air Mar a nì thu ath-shuidheachadh roghainnean lìonra air Windows 10
Cuideachd Leugh: Mar a shuidhicheas tu roinneadh fhaidhlichean lìonra air Windows 10
Dòigh 18: Dèan ath-nuadhachadh an t-siostaim
If you have recently updated your Windows 10 operating system and later facing network error 0x00028001 error code, the latest Windows update components may interfere with any software present in your computer and may cause network keeps disconnecting Windows 10 issue. So, in this case, you must restore your computer to the previous version when it was working fine. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network without any problems.
Dòigh 19: Ath-shuidheachadh PC
If none of the methods have helped you fix 0x00028001 error code, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Method 20: Contact Internet Service Provider
Last but not the least, you have to seek for technical support if above-listed methods fail to resolve network error 0x00028001 error. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device.
For instance, when you try to register your modem but face troubles during the process, several authentication attempts will slow down your network connection. This will lead to 0x00028001 error. So, in this case you have to contact your Internet Service Provider to diagnose and resolve the problem. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
Air a mholadh:
Tha sinn an dòchas gun robh an stiùireadh seo cuideachail agus gum b’ urrainn dhut a chàradh network error 0x00028001 in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.