Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Reboot and Select Proper Boot Device Issue [SOLVED]
Method 1: Set Correct Boot Order
Is dòcha gu bheil thu a’ faicinn a’ mhearachd “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Nuair a thòisicheas an coimpiutair agad (Ron sgrion tòiseachaidh no an scrion mearachd), brùth air Delete no iuchair F1 no F2 a-rithist (A rèir neach-dèanamh a’ choimpiutair agad) gus cuir a-steach suidheachadh BIOS.
2.Once tha thu ann an suidheachadh BIOS tagh Boot tab bhon liosta de roghainnean.
3.Now dèanamh cinnteach gu bheil a 'choimpiutair diosc cruaidh no SSD air a shuidheachadh mar phrìomhachas ann an òrdugh Boot. Mura h-eil an uairsin cleachd iuchraichean saighead suas no sìos gus diosc cruaidh a shuidheachadh aig a’ mhullach a tha a’ ciallachadh gun tòisich an coimpiutair bhuaithe an-toiseach seach stòr sam bith eile.
4.Finally, brùth F10 gus an t-atharrachadh seo a shàbhaladh agus fàgail. Feumaidh seo a bhith Fix Reboot and Select Proper Boot Device Issue, mura h-eil an uairsin lean ort.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Gus ruith Diagnostics ath-thòisich do PC agus mar a thòisicheas an coimpiutair (mus tòisich an scrion), brùth F12 iuchair agus nuair a nochdas an clàr Boot, comharraich an roghainn Boot to Utility Partition no an roghainn Diagnostics agus brùth a-steach gus an Diagnostics a thòiseachadh. Nì seo sgrùdadh fèin-ghluasadach air bathar-cruaidh an t-siostaim agad gu lèir agus bheir e cunntas air ais ma lorgar cùis sam bith.
Air a mholadh: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
cudromach: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Insert the Windows 10 DVD stàladh bootable agus ath-thòisich am PC agad.
2.When prompted to Brùth iuchair sam bith airson bròg bho CD no DVD, brùth iuchair sam bith gus leantainn air adhart.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart agus tha thu air a bhith soirbheachail Fix Reboot and Select Proper Boot Device issue, if not, continue.
Cuideachd, leugh Mar a shocraicheas tu càradh fèin-ghluasadach cha b’ urrainn do PC a chàradh.
Method 5: Enable UEFI Boot
1.Restart your PC agus tap F2 no DEL a rèir do PC gus Boot Setup fhosgladh.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Note: Comharraich an earrann glèidhte an t-siostaim (mar as trice 100mb) gnìomhach agus mura h-eil Pàirt glèidhte an t-siostaim agad, comharraich C: Drive mar an sgaradh gnìomhach.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Dòigh 7: Càradh Stàlaich Windows 10
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
Sin agad e gu soirbheachail Fix Reboot and Select proper Boot device issue ach ma tha ceist sam bith agad fhathast a thaobh na dreuchd seo faodaidh tu faighneachd dhaibh anns an earrann bheachdan.