When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Outdated Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icona.
2. If the status is set to Non conectado, faga clic no botón Network globe icon, choose your Wi-Fi network and click on Conectar button. Make sure Modo avión non está activado.
3. If you again face the same network connection error code, then click on the Desconectar button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Fai clic co botón dereito no botón Icona Wi-Fi e seleccione Open Network & Internet settings.
6. Prema en Wi-Fi.
7. Scroll down the right menu, click on Xestionar redes coñecidas.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Esquece.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Método 2: reinicie o router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Nota: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Atopar o Botón de enerxía na parte traseira do seu router.
2. Prema o botón unha vez para apágao.
3. Agora, apagar súa Router power cable e agarde ata que a enerxía estea totalmente drenada dos capacitores.
4. Entón, reconectar o cable de alimentación e acéndeo despois dun minuto.
5. Agarde ata que se restableza a conexión de rede e tenta iniciar sesión de novo.
Ler tamén: Corrixir os ordenadores que non aparecen na rede en Windows 10
Método 3: execute o solucionador de problemas de rede
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Bate o Tecla Windows e escribe Configuración de solución de problemas na barra de busca e Abrir.
2. Prema en Solucións de problemas adicionais.
3. Seleccionar Adaptador de rede e prema en Executa o solucionador de problemas.
4. Select the network adapter to diagnose e prema en seguinte.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, Prema en Peche o solucionador de problemas.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Ler tamén: Fix Family Sharing YouTube TV Not Working
Método 4: reparar ficheiros do sistema
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Comprobador de ficheiros do sistema) /DISM (Servizo de xestión e xestión de imaxes) utilities on your Windows 10 PC.
1. Bate o Tecla Windows, escriba Ventá de consola e prema en Executar como administrador.
2. Prema en si no Control de Conta de Usuario prompt.
3. Tipo chkdsk C: / f / r / x manda e golpea Introduza a tecla.
4. Se se lle solicita unha mensaxe, Chkdsk non pode executarse... o volume está... en proceso de uso, a continuación, escriba Y e presione o Introduza a tecla.
5. De novo, escriba o comando: sfc / scannow e prensa Introduza a tecla para executar o Comprobador de ficheiros do sistema dixitalización.
Nota: Iniciarase unha exploración do sistema e tardará un par de minutos en rematar. Mentres tanto, podes seguir realizando outras actividades pero teña en conta que non pechas accidentalmente a xanela.
Despois de completar a exploración, mostrará calquera destas mensaxes:
- A protección de recursos de Windows non atopou infraccións á integridade.
- Windows Resource Protection non puido realizar a operación solicitada.
- Windows Resource Protection atopou ficheiros corruptos e reparounos correctamente.
- A protección de recursos de Windows atopou ficheiros corruptos pero non puido arranxar algúns deles.
6. Unha vez que remate a exploración, reiniciar o teu PC.
7. De novo, lanza Aviso de comando como administrador e executa os comandos dados un despois do outro:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Nota: Debes ter unha conexión a Internet que funcione para executar os comandos DISM correctamente.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Método 5: reactiva o adaptador de rede
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Bate o Tecla Windows e escribe Xestor de dispositivo in the Windows search menu. Click on aberto.
2. Expanda o Adaptadores de rede section by double-clicking on it.
3. Fai clic co botón dereito sobre o teu Controlador de rede (por exemplo, Intel (R) Dual Band Wireless-AC 3168) e seleccione o Desactivar o dispositivo opción.
4. Confirm the below prompt by clicking on si.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Activar o dispositivo opción.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Ler tamén: Fix Windows non puido detectar automaticamente a configuración do proxy desta rede
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Vaia ao menú de busca e escriba cmd. Prema en Executar como administrador.
2. Escriba o seguinte comandos e presione o Introduza a tecla.
restablecemento de netsh winsock netsh int ip reset ipconfig / release ipconfig / renovar
3. Agarde a que se executen os comandos e reinicie o seu PC.
Método 7: vaciar a caché DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lanzamento Ventá de consola by searching in the Windows menú and click on Run as administrator.
2. Tipo ipconfig / flushdns in the command window and hit Entrar.
Ler tamén: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Inicia o Correr caixa de diálogo premendo Teclas Windows + R. xuntos.
2. Tipo ncpa.cpl e golpeou Introduza a tecla.
3. Right-click on your active adaptador de rede e prema en Propiedades.
4. Desmarque o Protocolo Internet versión 6 (TCP / IPv6) opción.
5. Finalmente, fai clic en OK to save the changes and check if the issue is resolved.
Nota: If you use multiple network connections, navigate to Centro de Rede e Compartir Cambiar o adaptador settings. Right-click on the adapter and select Incapacitar. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tipo Xestor de dispositivo in the Windows search menu and click aberto.
2. Fai dobre clic no botón Adaptadores de rede para expandilo.
3. Fai clic co botón dereito sobre o teu condutor (por exemplo: Intel(R) Wireless-AC 3168 de banda dual) e faga clic Actualizar o controlador.
4. Prema en Busque controladores no meu ordenador to locate and install a driver manually.
5. Fai clic no botón Navegador button to choose any directory and click on seguinte.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Os mellores controladores para o teu dispositivo xa están instalados.
6. Prema en preto para saír da fiestra.
7. Reinicia the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lanzamento Xestor de dispositivo from the Windows search menu.
2. Fai clic co botón dereito no botón condutor e seleccione Desinstalar o dispositivo.
3. A warning prompt will be displayed on the screen. Check the box “Elimina o software do controlador para este dispositivo” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Visita o páxina web do fabricante.
2. Buscar descargar os controladores correspondentes á versión de Windows no seu PC.
3. Once downloaded, double click on the ficheiro descargado and follow the given instructions to install it.
Ler tamén: How to set up a VPN on Windows 10
Método 10: Actualiza Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Preme o botón Windows+I claves xuntos para abrir Configuración No teu computador.
2. Seleccionar Actualización e seguridade.
3. Seleccionar Comprobe se hai actualizacións.
4A. Click Instalar agora para descargar e instalar a última actualización dispoñible.
4B. Se o teu sistema xa está actualizado, mostrarase Estás ao día mensaxe.
Método 11: Desinstale as actualizacións recentes
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Manteña premido Teclas Windows + R. xuntos para abrir Correr caixa de diálogo.
2. Tipo appwiz.cpl e golpeou Entrar.
3. Prema en Ver actualizacións instaladas.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and reinicie o PC.
Ler tamén: Como corrixir Firefox que non carga as páxinas
Método 12: realice o restablecemento da rede
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the adaptadores de rede installed in your PC along with their settings. All the stored settings are stored to default settings.
Nota: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Configuración logo sistema sobre. Once you have reset your network, you have to reinstall all networking software como Clientes VPN or Interruptores virtuais.
1. Manteña premido Teclas Windows + I xuntos para abrir Configuración de Windows.
2. Prema en Rede e Internet.
3. Prema en Restablecemento de rede para Estado.
4. Confirme a solicitude facendo clic en Restablecer agora.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recomendado:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.