When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Tsare-tsaren Tsare-tsare.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Ba a haɗa ba, danna kan Network globe icon, choose your Wi-Fi network and click on connect button. Make sure Yanayin jirgin sama ba a kunna ba.
3. If you again face the same network connection error code, then click on the Cire haɗin button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Danna dama-dama akan Wi-Fi icon kuma zaži Open Network & Internet settings.
6. Danna kan Wi-Fi.
7. Scroll down the right menu, click on Sarrafa cibiyoyin sadarwa da aka sani.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Manta.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
lura: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Bincika Makullin wuta at the back of your router.
2. Press the button once to kashe shi.
3. Yanzu, cire haɗin ka Router power cable kuma jira har sai ikon ya ƙare gaba ɗaya daga capacitors.
4. Sannan, sake haɗawa da na USB kuma kunna shi bayan minti daya.
5. Wait until the network connection is re-established and try signing in again.
Har ila yau Karanta: Gyara Kwamfutoci Ba A nunawa akan hanyar sadarwa a cikin Windows 10
Hanyar 3: Gudanar da Matsalar hanyar sadarwa
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Buga Maɓallin Windows da kuma buga Shirya matsala a cikin sandar bincike kuma Bude.
2. Danna kan Additionalarin matsala masu matsala.
3. Zaɓi Adabin hanyar sadarwa da kuma danna kan Gudun mai warware matsalar.
4. Select the network adapter to diagnose da kuma danna kan Next.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, danna kan Rufe mai matsala.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Har ila yau Karanta: Gyara Iyali Rarraba YouTube TV Baya Aiki
Hanyar 4: Gyara Fayilolin Tsarin
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Fayil din Fayil) /DISM (Yin amfani da Hotunan Hotuna da Gudanarwa) utilities on your Windows 10 PC.
1. Buga Maɓallin Windows, rubuta umurnin m da kuma danna kan Gudura a matsayin mai gudanarwa.
2. Danna kan A a cikin Ikon Asusun mai amfani da sauri.
3. type chkdsk C: /f/r /x umarni da buga Shigar da maballin.
4. Idan aka turo maka da sako. Chkdsk ba zai iya aiki ba…ƙarar yana… ana amfani da shi, to, rubuta Y da kuma buga Shigar da maballin.
5. Sake rubuta umarnin: sfc / scannow kuma latsa Shigar da maballin don gudu Fayil din Fayil duba.
lura: Za a fara duba tsarin kuma zai ɗauki mintuna biyu kafin a gama. A halin yanzu, zaku iya ci gaba da yin wasu ayyukan amma ku kula da kada ku rufe taga da gangan.
Bayan kammala binciken, zai nuna ɗayan waɗannan saƙonni:
- Kariyar Albarkatun Windows bai sami wani take hakki ba.
- Kariyar Albarkatun Windows ta kasa aiwatar da aikin da aka nema.
- Kariyar Albarkatun Windows ta samo ɓatattun fayiloli kuma ta yi nasarar gyara su.
- Kariyar Albarkatun Windows ta sami gurbatattun fayiloli amma ya kasa gyara wasu daga cikinsu.
6. Da zarar an gama scan din. sake kunnawa kwamfutarka.
7. Bugu da ƙari, ƙaddamarwa Umurnin Umurnin ya zama mai gudanarwa kuma aiwatar da umarnin daya bayan daya:
dism.exe / kan layi /cleanup-image /scanhealth dism.exe / kan layi / tsaftace-hoton / dawo da lafiya dism.exe / kan layi /cleanup-image /startcomponentcleanup
lura: Dole ne ku sami haɗin intanet mai aiki don aiwatar da umarnin DISM yadda ya kamata.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Hanyar 5: Sake kunna adaftar hanyar sadarwa
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Buga Maɓallin Windows da kuma buga Manajan na'ura in the Windows search menu. Click on Bude.
2. Fadada da Adaftar cibiyar sadarwa sashe ta danna sau biyu akansa.
3. Danna-dama akan naka Direban hanyar sadarwa (misali, Intel (R) Dual Band Wireless-AC 3168) kuma zaɓi da Kashe na'urar zaɓi.
4. Confirm the below prompt by clicking on A.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Enable na'urar zaɓi.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Har ila yau Karanta: Gyara Windows ba zai iya gano saitunan wakili na wannan hanyar sadarwa ta atomatik ba
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Jeka menu na bincike kuma ka rubuta cmd. Click a kan Gudura a matsayin mai gudanarwa.
2. Rubuta wadannan dokokin da kuma buga Shigar da maballin.
Netsh Winsock sake saiti netsh int ip sake saiti ipconfig / saki ipconfig / sabunta
3. Wait for the commands to be executed and sake yi kwamfutarka.
Hanyar 7: Sanya cache na DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Kaddamarwa umurnin m by searching in the Windows menu and click on Run as administrator.
2. type ipconfig / flushdns in the command window and hit Shigar.
Har ila yau Karanta: [WARWARE] Windows ta gano matsala mai wuyar faifai
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Kaddamar da Run akwatin maganganu ta latsa Windows + R makullin tare.
2. type ncpa.cpl kuma buga Shigar da maballin.
3. Right-click on your active Hanyar sadarwa da kuma danna kan Properties.
4. Cire alamar Sigar Yarjejeniyar Intanet 6 (TCP / IPv6) zaɓi.
5. A ƙarshe, danna kan OK to save the changes and check if the issue is resolved.
lura: If you use multiple network connections, navigate to Cibiyar Sadarwar Yanar Gizo da Ƙungiya da kuma Canza adaftan settings. Right-click on the adapter and select musaki. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. type Manajan na'ura in the Windows search menu and click Bude.
2. Danna sau biyu akan Adaftar cibiyar sadarwa domin fadada shi.
3. Danna-dama akan naka direba (misali Intel (R) Dual Band Wireless-AC 3168) kuma danna Ɗaukaka direba.
4. Danna kan Binciki kwamfutata don direbobi to locate and install a driver manually.
5. Danna kan browser button to choose any directory and click on Next.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Idan sun riga sun kasance cikin sabuntawa, allon yana nuna saƙo mai zuwa, An riga an shigar da mafi kyawun direbobi don na'urar ku.
6. Danna kan Close domin fita ta taga.
7. Sake kunnawa the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Kaddamarwa Manajan na'ura from the Windows search menu.
2. Danna dama-dama akan direba kuma zaži Uninstall na'urar.
3. A warning prompt will be displayed on the screen. Check the box “Share software na direba don wannan na'urar” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Ziyarci gidan yanar gizon masana'anta.
2. Find da kuma Download direbobin da suka dace da sigar Windows akan PC ɗin ku.
3. Once downloaded, double click on the sauke fayil kuma bi umarnin da aka bayar don shigar da shi.
Har ila yau Karanta: Yadda ake saita VPN akan Windows 10
Hanyar 10: Sabunta Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Latsa Windows + Ina keys tare a bude Saituna a kan kwamfutarka.
2. Zaɓi Sabuntawa & Tsaro.
3. Zaɓi Duba don Sabuntawa.
4A. Click Sanya yanzu don saukewa da shigar da sabuwar sabuntawa akwai.
4B. Idan tsarin ku ya riga ya sabunta, to zai nuna Kuna da zamani sako.
Hanyar 11: Cire Sabunta Kwanan nan
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Latsa ka riƙe Windows + R makullin tare don buɗewa Run akwatin maganganu.
2. type appwiz.cpl kuma buga Shigar.
3. Danna kan Dubi shafukan shigarwa.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and sake kunna PC.
Har ila yau Karanta: Yadda ake Gyara Firefox Ba Loading Pages
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
lura: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Saituna sa'an nan System da kuma Game da. Once you have reset your network, you have to reinstall all networking software kamar Abokan ciniki na VPN or Sauye-sauye na zahiri.
1. Latsa ka riƙe Windows + I keys tare a bude Windows Saituna.
2. Danna kan Hanyar sadarwa da yanar gizo.
3. Danna kan Sake saitin cibiyar sadarwa karkashin Status.
4. Tabbatar da faɗakarwa ta danna kan Sake saita yanzu.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
shawarar:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.