Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
Tabbatar da ƙirƙirar wurin mayarwa kawai idan wani abu ya ɓace.
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
lura: Backup the registry just in case something goes wrong.
1. Danna Windows Key + R sannan ka rubuta regedit kuma danna Shigar don buɗe Editan rajista.
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3. Tabbatar da zaɓi {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find UpperFilters da Ƙananan Filters.
4. Danna-dama akan kowannensu kuma zaɓi Share.
5.Reboot your PC don ajiye canje-canje.
Hanyar 2: Run System Restore
1. Danna Windows Key + R sannan ka buga"sysdm.cpl” sai a buga enter.
2.Select Tsarin tsarin tab ka zabi Mayar da tsarin.
3. Danna Next kuma zaɓi abin da ake so Matsayin Mayar da tsarin.
4.Bi umarnin kan allo don kammala tsarin dawo da tsarin. Kuma duba idan za ku iya Fix USB Error Code 52 Windows cannot verify the digital signature, idan ba haka ba to ci gaba da hanyoyin da aka lissafa a ƙasa.
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.
3.Restart your PC and see if you’re able to Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on Makullin wuta then hold Motsi da kuma danna kan Sake kunnawa (while holding the shift button).
2.Ka tabbata ba ka bari tafi na Shift button sai ka ga Babban menu na Zaɓuɓɓukan farfadowa.
3.Now Kewaya zuwa wadannan a cikin Advanced farfadowa da na'ura Zabuka menu:
Shirya matsala > Babba zaɓuɓɓuka > Saitunan farawa > Sake farawa
4.Da zarar ka danna Restart PC dinka zai sake farawa kuma zaka ga blue allon mai jerin zabin ka tabbata ka danna maballin lamba kusa da zabin da ke cewa "Kashe tilasta sa hannun direba."
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc kuma danna Shigar don buɗe Manajan Na'ura.
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select Jagorar Jagora.
7. Zabi"Bincika ta atomatik don sabunta software na direba."
8.Repeat the above process for every problematic device listed in Device Manager.
9.Reboot your PC don ajiye canje-canje da kuma ganin idan kana iya Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1. Danna Windows Key + R sannan ka rubuta devmgmt.msc kuma buga Shigar.
2.Dama-dama each of problematic device (yellow exclamation mark next to it) and select Uninstall.
3.Click Yes/OK to continue with uninstallation.
4.Reboot your PC don ajiye canje-canje.
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys fayiloli zuwa usbehciold.sys & usbhubold.sys.
3. Danna Windows Key + R sannan ka rubuta devmgmt.msc kuma buga Shigar.
4. Fadada Kwamfuta Masu Tsaran Hannu na Duniya sannan danna daman dama Standard Enhanced PCI to USB Host Controller kuma zaži Uninstall.
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2. Yanzu rubuta wadannan a cikin cmd kuma danna Shigar:
Sfc / scannow sfc / scannow /offbootdir=c: /offwindir=c:windows
3.Wait na sama tsari gama da da zarar yi zata sake farawa da PC.
4.Na gaba, gudanar da CHKDSK daga nan Gyara Kurakurai na Tsarin Fayil tare da Duba Utility Disk(CHKDSK).
5.Let na sama tsari kammala da sake sake yi your PC don ajiye canje-canje.
Duba idan za ku iya Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1. Danna Windows Key + X sannan ka zabi Umurnin Umurnin (Admin).
2.Type the following command into cmd and hit Enter after each one:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -saitin TESTSIGNING ON
3.If the above command doesn’t work then try the following:
bcdedit /deletevalue loadoptions
bcdedit-kafa GABA BUKATA
4.Reboot your PC don ajiye canje-canje.
Shawararku:
Shi ke nan kun samu nasara Fix USB Error Code 52 Windows cannot verify the digital signature amma idan har yanzu kuna da wata tambaya game da wannan jagorar to ku ji daɗin tambayar su a sashin sharhi.