Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Sake yi kuma zaɓi Batun Na'urar Boot Da Ya dace [WARWARE]
Method 1: Set Correct Boot Order
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Lokacin da kwamfutarku ta fara (Kafin boot screen ko allon kuskure), akai-akai danna maɓallin Delete ko F1 ko F2 (Ya danganta da masana'antun kwamfutarka) shigar da saitin BIOS.
2.Da zarar kana cikin saitin BIOS zaɓi Boot tab daga jerin zaɓuɓɓuka.
3.Yanzu tabbatar cewa kwamfutar Hard disk ko SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, if not then continue.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Don kunna Diagnostics zata sake kunna PC ɗinku kuma yayin da kwamfutar ta fara (kafin allon taya), danna maɓallin F12 kuma lokacin da menu na Boot ya bayyana, haskaka zaɓin Boot to Utility Partition ko zaɓin Diagnostics kuma danna shiga don fara Diagnostics. Wannan zai bincika duk kayan aikin tsarin ku ta atomatik kuma zai ba da rahoto idan an sami wata matsala.
shawarar: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Muhimmi: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Saka Windows 10 DVD ɗin shigarwa na bootable kuma sake kunna PC ɗin ku.
2.Lokacin da aka sa kowane maɓalli don taya daga CD ko DVD, danna kowane maɓalli don ci gaba.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart kuma kun yi nasara Fix Reboot and Select Proper Boot Device issue, if not, continue.
Hakanan, karanta Yadda ake gyara Gyaran atomatik ya kasa gyara PC ɗin ku.
Hanyar 5: Kunna UEFI Boot
1.Restart your PC da kuma matsa F2 ko DEL dangane da PC don bude Boot Setup.
2.The make the following changes:
Canja zaɓin lissafin Boot zuwa UEFI Kashe Load Legacy zaɓi ROM Kunna Takalmi mai aminci
3.Next, matsa F10 don Ajiye kuma fita daga saitin taya.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
lura: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Hanyar 7: Gyara Shigar Windows 10
Idan babu ɗayan hanyoyin da ke sama da ke aiki a gare ku to zaku iya tabbata cewa HDD ɗinku yana da kyau amma kuna iya ganin kuskuren "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” saboda tsarin aiki ko bayanan BCD akan HDD an goge ko ta yaya. To, a wannan yanayin, kuna iya ƙoƙarin gyara Windows ɗinku amma idan wannan kuma ya gaza to mafita ɗaya da ya rage shine shigar da sabon kwafin Windows (Clean Install).
Shi ke nan kun samu nasara Gyara Reboot and Select proper Boot device issue amma idan har yanzu kuna da wata tambaya game da wannan post to ku nemi su a sashin sharhi.