Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
कुछ गलत होने की स्थिति में एक पुनर्स्थापना बिंदु बनाना सुनिश्चित करें।
विधि 1: एंटीवायरस और फ़ायरवॉल को अस्थायी रूप से अक्षम करें
1.पर राइट-क्लिक करें एंटीवायरस प्रोग्राम आइकन सिस्टम ट्रे से चुनें और चुनें अक्षम करें।
2. इसके बाद, उस समय सीमा का चयन करें जिसके लिए एंटीवायरस अक्षम रहेगा.
नोट: यथासंभव न्यूनतम समय चुनें, उदाहरण के लिए 15 मिनट या 30 मिनट।
3.Once done, again check if the error resolves or not.
4.Windows Key+I दबाएँ और फिर चुनें कंट्रोल पैनल।
5.नेक्स्ट पर क्लिक करें व्यवस्था और सुरक्षा।
6.फिर पर क्लिक करें विंडोज फ़ायरवॉल।
7.अब बाएँ विंडो फलक से Windows फ़ायरवॉल चालू या बंद करें पर क्लिक करें।
8.Windows फ़ायरवॉल बंद करें चुनें और अपने पीसी को पुनरारंभ करें। And see if you’re able to Fix Error code 0x80070035 The network path was not found.
यदि उपरोक्त विधि काम नहीं करती है तो अपने फ़ायरवॉल को फिर से चालू करने के लिए ठीक उन्हीं चरणों का पालन करना सुनिश्चित करें।
Method 2: Delete Hidden Network Adapters
1. विंडोज की + आर दबाएं फिर टाइप करें Devmgmt.msc और हिट दर्ज करें खोलने के लिए डिवाइस मैनेजर।
2.अब चुनें नेटवर्क एडेप्टर और फिर क्लिक करें देखें > छुपे हुए उपकरण दिखाएँ।
3.Right-click on each of the hidden devices and select डिवाइस अनइंस्टॉल करें.
4.Do this for all the hidden devices listed under Network Adapters.
5. परिवर्तनों को सहेजने के लिए अपने पीसी को रीबूट करें।
Method 3: Turn ON Network Discovery
1. विंडोज की + एक्स दबाएं और फिर चुनें कंट्रोल पैनल।
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings बाएं हाथ के मेनू से।
4.Check mark नेटवर्क खोज चालू करें and click Save changes.
5. परिवर्तनों को सहेजने के लिए अपने पीसी को रीबूट करें और देखें कि क्या आप सक्षम हैं Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. विंडोज की + आर दबाएं फिर टाइप करें Ncpa.cpl पर राइट और Enter दबाएं
2.Right-click on your active Wi-Fi or ethernet connection and select गुण।
3.Select संस्करण 4 इंटरनेट प्रोटोकॉल (टीसीपी / IPv4) और गुण क्लिक करें।
4.अब क्लिक करें उन्नत in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “TCP/IP पर NetBIOS सक्षम करें“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. विंडोज की + एक्स दबाएं और फिर चुनें कंट्रोल पैनल।
2.Type क्रेडेंशियल in the control panel search and click on क्रेडेंशियल प्रबंधक।
3.Select विंडोज क्रेडेंशियल्स और फिर क्लिक करें Add a Windows credential.
4.One by one type the उपयोगकर्ता नाम और पासवर्ड of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select गुण।
2. स्विच करें शेयरिंग टैब and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “यह फ़ोल्डर साझा करें” and make sure the Share name is correct.
4. अप्लाई पर क्लिक करें और उसके बाद ओके पर क्लिक करें।
Method 7: Change Network Security settings
1. विंडोज की + आर दबाएं फिर टाइप करें secpol.msc और Enter दबाएं
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. डबल क्लिक करें नेटवर्क सुरक्षा: LAN प्रबंधक प्रमाणीकरण स्तर in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. अप्लाई पर क्लिक करें और उसके बाद ओके पर क्लिक करें।
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
विधि 8: TCP/IP रीसेट करें
1.विंडोज़ बटन पर राइट-क्लिक करें और “चुनें”कमांड प्रॉम्प्ट (एडमिन)।"
2.अब निम्नलिखित कमांड टाइप करें और प्रत्येक के बाद एंटर दबाएं:
(ए) आईपीकॉन्फिग / रिलीज
(बी) ipconfig /flushdns
(सी) ipconfig/नवीनीकरण
3. फिर से एडमिन कमांड प्रॉम्प्ट खोलें और निम्नलिखित टाइप करें और प्रत्येक के बाद एंटर दबाएं:
- ipconfig / flushdns
- nbtstat -r
- netsh int आईपी रीसेट
- netsh winsock रीसेट
4. परिवर्तन लागू करने के लिए रीबूट करें।
आपके लिए अनुशंसित:
यही आपने सफलतापूर्वक किया है Fix Error code 0x80070035 The network path was not found लेकिन अगर आपके मन में अभी भी इस पोस्ट के बारे में कोई सवाल है तो बेझिझक उन्हें कमेंट सेक्शन में पूछ सकते हैं।