When you are enjoying your favorite song via Bluetooth headphones, the sound may sometimes be cut off without any reason. At this moment, you may feel infuriated and you may adjust your Bluetooth positions and angles, yet the Bluetooth audio stuttering continues to happen. Even though your Bluetooth headphones are fully charged, you cannot use them if it has any internal issues or if there are any incompatible audio settings on your Windows 10 computer. Don’t worry! You are not the only one who faces Bluetooth headphones stuttering Windows 10 issues. We have some effective amazing fixes for you that will bring your computer out of the trouble. So, continue reading.
How to Fix Bluetooth Headphones Stuttering on Windows 10
Here are some common reasons that cause Bluetooth audio stuttering issues on lub qhov rais 10. Analyze them deeply to find out the exact cause in your case.
- Bluetooth battery is running low.
- Bluetooth device is far away from the signal source.
- Signal mismatch.
- Human body is interfering with the Bluetooth signal.
- One or more Bluetooth devices are on at the same time.
- Outdated firmware.
- Outdated Operating System and incompatible audio drivers.
- Time to upgrade; headphones are age-old!
In this section, we have compiled a list of methods that help you troubleshoot Bluetooth headphones stuttering Windows 10 issues. Firstly check and fix the hardware problems and then move ahead to Windows troubleshooting methods as instructed below.
Method 1: Charge Bluetooth Battery
You may sometimes analyse when Bluetooth headphones lose charge, the audio may turn out choppy. In this case, you have to charge your Bluetooth device and always make sure there is a minimum level of power to avoid any audio problems.
In some latest Bluetooth devices, the battery level can be identified by colour code. For example, in the OnePlus Earbuds,
- Ntsuab – Indicates battery level is optimum for use.
- Liab – Indicates battery level is very low and needs charging.
So, what if the battery level is adequate, but still facing Bluetooth headphones stuttering Windows 10? Check and try the following methods!
Method 2: Maintain Bluetooth Signal Range
Bluetooth devices make use of short wave radio signals and when you are out of range, you cannot hear the audio properly and the audio disconnects later. Your Bluetooth device manufacturer would have mentioned the signal range of your device on the package. Check it out or browse the internet to find out the coverage range. Then, maintain the same distance as mentioned. Check if this works.
Kuj nyeem: How to Install Bluetooth on Windows 10
Method 3: Avoid Cross Body Interference
You may sometimes face Bluetooth headphones stuttering Windows 10 when you are keeping one of the Bluetooth devices on your pant trousers or your palm and the other on your ear.
This may be due to the 70% + water content in your body. Bluetooth radio waves travel very bad over waterlogging substances, if you are in this situation, please change the position of Bluetooth devices.
Method 4: Remove Problematic Obstructions
Similarly, if there are any metallic interruptions, Bluetooth waves bounce out and you may face Bluetooth audio stuttering issue on your Windows 10 PC. Likewise, if there is any txhawb nqa pob zeb (such as a wall) substance between your computer and Bluetooth device, you may face audio stuttering issues. You are advised to remove these obstructions and sit near your Bluetooth device and computer.
Method 5: Avoid Placing Devices with High Wi-Fi Range
Several modern wireless devices like smart bulbs, high range routers, cordless phones, Wi-Fi routers, and monitors employ high Wi-Fi range signals, and some may even work with 2.4 GHz – 2.5Ghz.
Also, if you are using a Bluetooth device, avoid Wi-Fi interferences in the transmission paths. In addition to this, remove extra Bluetooth connections connected to your computer and check if you face the problem again.
Method 6: Use USB Cable (For Bluetooth Dongle Users)
In some cases, electrical interference between the module of your motherboard and your Bluetooth device may cause Bluetooth audio stuttering issue. This problem can be resolved by increasing the distance between the USB dongle and the USB port on Windows 10.
Kuj nyeem: How to Rename Bluetooth Devices on Windows 10
Method 7: Reconnect Bluetooth
As of now, you have followed hardware troubleshooting methods to fix Bluetooth headphones stuttering Windows 10 issue. Still, if you did not attain any fix, then the problem is not with your hardware. To troubleshoot temporary problems associated with your Bluetooth device and your computer, turn off the Bluetooth and turn it on again after some time as instructed below.
1. Nias lub Windows qhov tseem ceeb thiab hom Bluetooth nqis, then hit Sau tus yuam sij.
2. Now, toggle off the Bluetooth icon raws li qhia.
3. Wait for a while and toggle ON the same setting again.
Check if you have fixed Bluetooth audio stuttering issue on Windows 10.
Method 8: Select Correct Audio Output
When you are using more than one audio output device, you have to confirm whether Bluetooth device is used up as an output device. To check the audio output in your Windows 10 PC, follow the below-mentioned steps.
1. Nyem ntawm qhov Speakers icon at the right corner of the Taskbar.
2. Tam sim no, nyem rau ntawm qhov cim lub cim to expand the list of audio devices connected to the computer.
3. Then, select the audio device (your Bluetooth device) and make sure the audio is playing through the selected device.
If this method doesn’t help you, move ahead to the next one.
Kuj nyeem: How to Fix Bluetooth problems in Windows 10
Method 9: Run Bluetooth Troubleshooter
Your Windows 10 computer has a built-in troubleshooter to fix many common problems arising from it. Likewise, you can fix Bluetooth headphones stuttering Windows 10 issue by running Bluetooth troubleshooter as instructed below.
1. Nias lub Windows qhov tseem ceeb, hom Kev daws teeb meem kev teeb tsa, thiab nias rau Qhib.
2. Taw rau hauv Nrhiav thiab kho lwm yam teeb meem seem.
3. Ntawm no, xaiv Bluetooth thiab nias rau Khiav lub teeb meem kev xaiv.
4. Windows will start Detecting problems. If there are any problems detected then follow on-screen instructions to Thov kev kho.
Method 10: Change Wi-Fi Bands
As discussed earlier, Bluetooth audio stuttering happens due to interference between two different wireless devices using the same frequency. To confirm this, you can take a simple hack of turning off your Wi-Fi router. After your Wi-Fi router is completely turned off check if you can fix Bluetooth headphones stuttering Windows 10 issue. If so, the problem is due to Wi-Fi and Bluetooth signal interferences. In this case, you can try switching between 2.4GHz and 5GHz Wi-Fi bands on your Windows 10 computer as instructed below.
1. Ntaus lub Windows qhov tseem ceeb, hom ntaus thawj, thiab nias rau Qhib.
2. Ob npaug nias rau Network adapters to expand the network drivers.
3. Then, right-click on your Wi-Fi adapter and click on Properties.
4. Tam sim no, nrhiav tus Band or Nyiam Band kev xaiv nyob hauv Khoom menu and click on it.
5. Tam sim no, nthuav cov nco-tshuab raj ntawm lub Tus nqi field and set the value as Nyiam 5GHz band as shown. Then, click on OK kom txuag tau qhov kev hloov.
Nco ntsoov: If the value is already set to Nyiam 5GHz band, then change the value to Prefer 2.4GHz thiab nias rau OK.
6. Thaum kawg, pib dua koj lub PC and check if you have fixed Bluetooth audio stuttering issue.
Kuj nyeem: Fix Bluetooth can’t turn off on Windows 10
Method 11: Re-enable Bluetooth Sound Card
You can easily resolve Bluetooth headphones stuttering Windows 10 issue by restarting the Bluetooth sound card as instructed below.
1. Ntaus lub Windows qhov tseem ceeb thiab hom Ntaus Tus Thawj Coj, ces nias rau Qhib.
2. Then, expand the Bluetooth ntu los ntawm ob-nias ntawm nws.
3. Then, right-click on your Bluetooth sound card thiab xaiv qhov Lov tes taw kev xaiv.
4. Tam sim no, paub meej tias qhov tshwm sim los ntawm txhaj rau Yog thiab reboot koj lub PC. Then, repeat Kauj Ruam 1-2.
5. Next, right-click on your Bluetooth suab daim card thiab xaiv qhov Pab ua tau kev xaiv.
6. Now, try playing any sound on Bluetooth device and check if the issue is resolved or not.
Txoj Kev 12: Kho cov ntaub ntawv tsis raug
For perfect audio quality services, a few essential files and programs must be functioning on your PC. But, if they are corrupt or misconfigured, you will face Bluetooth audio stuttering issues. Fortunately, all these corrupt misconfigured files can be repaired by using the inbuilt utilities of your Windows 10 PC namely, Daim Ntawv Teev Tseg thiab Txuas Duab Kev Pab thiab Tswj. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
Wait for the commands to be executed and check if you have fixed bluetooth issue on your PC.
Kuj nyeem: Txhim kho Bluetooth Driver yuam kev hauv Windows 10
Method 13: Restart Bluetooth Audio Services
A few essential Windows audio services will help you prevent Bluetooth audio stuttering issues in your Windows 10 PC. If in case, if these services are turned off, you may face several conflicts. Hence, you are advised to restart a few essential audio services as instructed below steps.
1. Nias lub Windows qhov tseem ceeb, hom cov kev pab cuam, thiab nias rau Khiav raws li cov thawj coj.
2. Tam sim no, scroll down thiab ob-nias rau ntawm qhov Kev Pabcuam Bluetooth.
3. Now, in the new pop-up window, select the Pib hom rau Tsis Siv Neeg, raws li tau piav qhia.
Nco ntsoov: Yog hais tias lub Qhov xwm txheej kev pabcuam is Nres, ces nias rau ntawm Start khawm. Yog tias Qhov xwm txheej kev pabcuam is khiav, nyem rau Tsis txhob thiab pib dua.
4. Nias rau Thov> OK kom txuag tau qhov kev hloov.
Txoj Kev 14: Disable Audio Enhancements
If you find your audio working well for other multimedia resources, but the sound seems to be of low quality or noisy, you are advised to change the sample rate. A low-frequency sample rate will cause Bluetooth audio stuttering issue, yet you can select a higher frequency sample rate by following the below-mentioned steps.
1. Txoj cai-nias rau ntawm Speakers icon at the bottom right corner of the screen and select the suab kev xaiv.
2. Tom qab ntawd, hloov mus rau lub Ua si tab and select the default Bluetooth audio device followed by the Properties khawm raws li qhia.
3. Tom qab ntawd, hloov mus rau lub Advanced tab and from the drop-down menu under Hom Ntawv Tshaj Lij, make sure you select the highest frequency range (16 bit, 44100 Hz).
4. Tam sim no, hloov mus rau lub Txhim Kho tab and check the box corresponding to Lov tes txhua qhov kev txhim kho raws li qhia.
5. Nias rau thov thiab ces OK to save the changes. Check if you face Bluetooth audio stuttering issue again. If so, adjust different levels of frequency ranges by repeating these steps and confirm which range solves the problem.
Kuj nyeem: Fix Windows 10 Audio Crackling
Method 15: Disable Remote Control and Hands-free Telephony
Hands-free telephony is a Windows service that is used to enable your Bluetooth device to answer phone calls. But, it sometimes reduces the sound quality of your voice signal contributing to Bluetooth audio stuttering issue. Similarly, the tej thaj chaw deb tswj feature also has its own disadvantages. If you wonder how to fix Bluetooth stuttering amidst these features, here are a few troubleshooting instructions.
1. Ntaus lub Windows qhov tseem ceeb thiab hom Control Panel, then click on Qhib.
2. Tam sim no, nyem rau ntawm qhov Saib cov cuab yeej thiab cov tshuab luam ntawv link as shown.
3. Tam sim no, right-click rau koj Bluetooth ntaus ntawv thiab nias rau Properties raws li qhia.
4. In the next window, switch to the cov kev pab cuam tab and uncheck the boxes, Hands-free Telephony thiab tej thaj chaw deb tswj raws li tau piav qhia.
5. Thaum kawg, nyem rau ntawm Thov> OK kom txuag tau qhov kev hloov.
Method 16: Adjust Roaming Aggressiveness Settings
The Roaming Aggressiveness settings in your computer change the signal strength threshold at which Wi-Fi network adapters scan for other Access Point candidates to offer a better signal connection. But, when this setting is fixed to the highest setting, you will face Bluetooth headphones stuttering Windows 10 issue. You are advised to turn off the setting as instructed below.
1. Tshaj tawm rau Tus thawj tswj xyuas ntaus ntawv los ntawm Qhov Nrhiav Tshawb Nrhiav.
2. Ob npaug nias rau Network adapters to expand the network drivers.
3. Then, right-click on your Wi-Fi adapter and click on Properties.
4. Tam sim no, nrhiav tus Roaming Aggressiveness kev xaiv nyob hauv Khoom list and click on it.
5. Tam sim no, teem lub Tus nqi rau Qhov qis tshaj thiab nias rau OK.
Check if you have fixed Bluetooth audio stuttering issue.
Kuj nyeem: Fix Windows 10 Bluetooth Mouse Lag
Method 17: Disable Bluetooth Collaboration (If Applicable)
Broadcom Network adapter is software that helps your Bluetooth device to be connected to the internet. But this setting may interfere with your device settings causing the discussed problem. If you want to know how to fix Bluetooth stuttering by turning off this setting, please follow the below-listed instructions.
1. Qhib Ntaus Tus Thawj Coj thiab mus rau Network adapters, then right-click on your network driver and select Properties.
2. Tam sim no, hloov mus rau lub Advanced tab thiab nias rau Bluetooth Collaboration nyob hauv Khoom sau.
3. Then, expand the Tus nqi drop-down list and click on xiam oob qhab.
4. Thaum kawg, nyem rau ntawm OK to save the changes and check if you have fixed the issue.
Method 18: Update Bluetooth Drivers
Outdated and incompatible Bluetooth drivers will always result in Bluetooth headphones stuttering Windows 10 issue. Always ensure you use an updated version of drivers and if your computer lacks the latest drivers, you are advised to update them as instructed in our guide How to Update Realtek HD Audio Drivers in Windows 10.
Nco ntsoov: Make sure you follow the same steps for Bluetooth Audio drivers raws li tau piav qhia hauv qab no.
Once you have updated your Bluetooth drivers to the latest version.
Kuj nyeem: Device Driver yog dab tsi? Nws Ua Haujlwm Li Cas?
Method 19: Reinstall Bluetooth Drivers
Incompatible drivers must be reinstalled to resolve all audio related problems. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or by implementing the steps manually as instructed in our guide How to Uninstall and Reinstall Drivers on Windows 10. Follow the steps corresponding to Bluetooth drivers as depicted.
After reinstalling the audio drivers, check if you can hear the audio on your Bluetooth device.
Method 20: Roll Back Bluetooth Driver Updates
Sometimes, the current version of audio drivers may cause any audio conflicts and in this case, you have to restore previous versions of installed drivers. This process is called rollback ntawm cov tsav tsheb thiab koj tuaj yeem yooj yim yob rov qab koj lub khoos phis tawj tsav tsheb mus rau lawv lub xeev dhau los los ntawm kev ua raws li peb phau ntawv qhia Yuav ua li cas rau Rollback Tsav Tsheb ntawm Windows 10.
Wait until the previous versions of drivers are installed on your Windows 10 PC. Once done, check if you have fixed the issue.
Txoj Kev 21: Hloov Windows
If there are any new Microsoft updates pending to be installed on your PC, a few bugs and problems cannot be resolved on your computer. As suggested by many users, updating Windows 10 computers will help you resolve Bluetooth audio stuttering issue. Follow our guide How to Download and Install Windows 10 Latest Update to update your Windows 10 computer.
After updating your Windows Operating System, check whether you can access audio on Bluetooth device.
Kuj nyeem: How to Boost the Bass of Headphones and Speakers in Windows 10
Method 22: Reset Bluetooth Device
Still, if you are thinking about how to fix Bluetooth stuttering issue even after trying all these troubleshooting steps, then you must try factory resetting your device. The resetting process of many headphones involves pressing the power button for a particular extent of time. The steps to reset your device depends on the model you are using and for detailed instructions, follow the below-mentioned steps.
Nco ntsoov: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
1. Disconnect your Bluetooth ntaus ntawv from Windows 10 PC.
2. Tam sim no, nias thiab tuav lub Lub hwj chim khawm of your Bluetooth device for about 7 txog 10 vib nas this.
3. A flash occurs (probably blue light) about 4 times.
4. Now all the settings and pairing information will be removed from your device.
5. Pair your device again and check if Bluetooth headphones stuttering Windows 10 issue is fixed now.
Nco ntsoov: Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
Method 23: Update Device Firmware
Firmware updates are released to resolve the problems and struggles reported on Bluetooth devices. You can update the firmware via apps and there are so many online platforms to support you in this process. If you have bought your Bluetooth device, seek professional support via email, since that’s the only means you can go for. On the other hand, if you have bought your Bluetooth device from a retail store, take your shoes and run to seek help from the retailer.
pom zoo:
Peb cia siab tias phau ntawv qhia no yuav pab tau thiab koj tuaj yeem kho bluetooth headphones stuttering on Windows 10. Feel free to reach out to us with your queries and suggestions via the comments section below.