When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Kev khiav hauj lwm tsis tu ncua.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon
2. If the status is set to Tsis txuas nrog, nyem rau ntawm Network globe icon, choose your Wi-Fi network and click on Mus Txuas Lus button. Make sure Airplane hom yog tsis tig.
3. If you again face the same network connection error code, then click on the disconnect button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Txoj cai-nias rau ntawm Wi-nkaus icon thiab xaiv Open Network & Internet settings.
6. Nias rau Wi-Fi.
7. Scroll down the right menu, click on Tswj cov tes hauj lwm paub.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Tsis Nco.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Txoj Kev 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Nco ntsoov: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Nrhiav tus Lub hwj chim khawm hauv qab ntawm koj lub router.
2. Nias lub khawm ib zaug rau tig tawm nws.
3. Tam sim no, disconnect koj Router power cable thiab tos kom txog thaum lub zog tag nrho ntws los ntawm cov capacitors.
4. Tom qab ntawd, reconnect lub fais fab cable thiab hloov nws tom qab ib feeb.
5. Tos kom txog thaum lub network txuas rov tsim dua thiab sim kos npe rau hauv dua.
Kuj nyeem: Fix Computers Not Showing Up on Network in Windows 10
Txoj Kev 3: Khiav Cov Teeb Meem Network
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Ntaus lub Windows qhov tseem ceeb thiab hom Kev daws teeb meem kev teeb tsa hauv qhov bar nrhiav thiab Qhib.
2. Nias rau Cov teeb meem txuas ntxiv.
3. Xaiv Network Adapter thiab nias rau Khiav lub teeb meem.
4. Select the network adapter to diagnose thiab nias rau Tom ntej no.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, nyem rau Kaw qhov teeb meem.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Kuj nyeem: Kho Tsev Neeg Sib Koom YouTube TV tsis ua haujlwm
Txoj Kev 4: Kho cov ntaub ntawv System
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Daim Ntawv Teev Tseg) /DISM (Txuas Duab Kev Pab thiab Tswj) utilities on your Windows 10 PC.
1. Ntaus lub Windows qhov tseem ceeb, hom Hais kom sai thiab nias rau Khiav raws li cov thawj coj.
2. Nias rau Yog nyob rau hauv lub Tus Tswj Xyuas Cov Neeg Siv Khoom kom sai.
3. Hom chkdsk C: / f / r / x txib thiab ntaus Sau tus yuam sij.
4. Yog tias koj muaj lus nug, Chkdsk tsis tuaj yeem khiav… lub ntim yog… nyob rau hauv cov txheej txheem siv, ces, type Y thiab ntaus cov Sau tus yuam sij.
5. Ib zaug ntxiv, ntaus cov lus txib: sfc / scannow thiab nias Sau tus yuam sij khiav lub Daim Ntawv Teev Tseg luam theej duab.
Nco ntsoov: Lub kaw lus scan yuav pib thiab nws yuav siv li ob peb feeb kom tiav. Lub caij no, koj tuaj yeem ua lwm yam haujlwm ntxiv tab sis nco ntsoov tsis txhob kaw lub qhov rais.
Tom qab ua tiav qhov scan, nws yuav pom ob qho ntawm cov lus no:
- Windows Resource Protection tsis pom muaj kev ua txhaum cai ncaj ncees.
- Windows Resource Protection tsis tuaj yeem ua haujlwm tau thov.
- Windows Resource Protection pom cov ntaub ntawv tsis raug thiab kho tau zoo.
- Windows Resource Protection pom cov ntaub ntawv tsis raug tab sis tsis tuaj yeem kho qee yam ntawm lawv.
6. Thaum lub scan tiav lawm, pib dua koj lub PC.
7. Ib zaug ntxiv, tso tawm Command Prompt ua tus tswj hwm thiab ua raws li cov lus txib muab rau ib qho tom qab:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Nco ntsoov: Koj yuav tsum muaj kev sib txuas hauv internet ua haujlwm kom ua tiav DISM cov lus txib kom raug.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Ntaus lub Windows qhov tseem ceeb thiab hom Ntaus Tus Thawj Coj in the Windows search menu. Click on Qhib.
2. Nthuav cov Network adapters ntu los ntawm ob-nias ntawm nws.
3. Right-click rau koj Network driver (piv txwv li, Intel (R) Dual Band Wireless-AC 3168) thiab xaiv qhov Lov tes taw kev xaiv.
4. Confirm the below prompt by clicking on Yog.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Pab ua tau kev xaiv.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Kuj nyeem: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Nias rau Khiav raws li cov thawj coj.
2. Ntaus cov hauv qab no lus txib thiab ntaus cov Sau tus yuam sij.
netsh winsock pib dua netsh int ip pib dua ipconfig / tso tawm ipconfig / txuas ntxiv
3. Wait for the commands to be executed and reboot koj lub PC.
Txoj Kev 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Tua tawm Hais kom sai by searching in the lub qhov rais ntawv qhia zaub mov and click on Run as administrator.
2. Hom ipconfig / flushdns in the command window and hit Sau.
Kuj nyeem: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Tshaj tawm rau khiav dialog box los ntawm nias Windows + R cov yuam sij ua ke.
2. Hom ncpa.cpl thiab ntaus Sau tus yuam sij.
3. Right-click on your active network adapter thiab nias rau Properties.
4. Uncheck lub Kev Cai Siv Is Taws Nem 6 (TCP / IPv6) kev xaiv.
5. Thaum kawg, nyem rau ntawm OK to save the changes and check if the issue is resolved.
Nco ntsoov: If you use multiple network connections, navigate to Network thiab Chaw Sib Koom thiab Hloov hloov pauv settings. Right-click on the adapter and select Lov tes taw. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Hom Ntaus Tus Thawj Coj in the Windows search menu and click Qhib.
2. Ob npaug nias rau ntawm Network adapters kom nthuav nws.
3. Right-click rau koj neeg tsav tsheb (xws li Intel(R) Dual Band Wireless-AC 3168) thiab nyem Tus neeg tsav tsheb hloov tshiab.
4. Nias rau Xauj kuv lub computer rau tus tsav tsheb to locate and install a driver manually.
5. Nyem ntawm qhov browser button to choose any directory and click on Tom ntej no.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Cov tsav tsheb zoo tshaj plaws rau koj lub cuab yeej twb tau teeb tsa lawm.
6. Nias rau Close yuav tawm lub qhov rais.
7. Pib dua the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Tua tawm Ntaus Tus Thawj Coj from the Windows search menu.
2. Txoj cai-nias rau ntawm neeg tsav tsheb thiab xaiv Uninstall ntaus ntawv.
3. A warning prompt will be displayed on the screen. Check the box “Rho tawm cov software tsav rau kev ntaus ntawv no” and confirm the prompt by clicking uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Xyuas cov Chaw tsim tshuaj paus lub vas sab.
2. nrhiav thiab download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the downloaded ntaub ntawv and follow the given instructions to install it.
Kuj nyeem: How to set up a VPN on Windows 10
Txoj Kev 10: Hloov Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Nias lub Qhov rai + Kuv lag luam ua ke qhib chaw ntawm koj lub computer.
2. Xaiv Hloov Kho & Ruaj Ntseg.
3. Xaiv Tshawb xyuas txog Cov Tshiab.
4A. Click Tam sim no nruab mus download tau thiab nruab qhov hloov tshiab tshiab muaj.
4B. Yog tias koj qhov system twb hloov tshiab lawm, ces nws yuav pom Koj mus txog hnub kawg lus.
Txoj Kev 11: Uninstall Cov Kev Hloov Tshiab Tsis ntev los no
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Nias thiab tuav Windows + R cov yuam sij ua ke qhib lub khiav dialog box.
2. Hom appwiz.cpl thiab ntaus Sau.
3. Nias rau Saib ntsia tshiab.
4. Select the most recent update and click on uninstall.
5. Confirm the prompt, if any, and reboot lub PC.
Kuj nyeem: Yuav ua li cas kho Firefox Tsis Loading nplooj ntawv
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Nco ntsoov: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to chaw ces system thiab Hais txog. Once you have reset your network, you have to reinstall all networking software zoo li VPN cov neeg siv khoom or Cov keyboards virtual.
1. Nias thiab tuav Windows + I keys ua ke qhib Qhov Chaw Xaiv Lub Chaw.
2. Nias rau Network & Is Taws Nem.
3. Nias rau Network pib dua nyob rau hauv raws li txoj cai.
4. Paub meej tias qhov kev ceeb toom los ntawm nias rau Pib dua tam sim no.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
pom zoo:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Qhia rau peb paub seb txoj kev twg ua haujlwm rau koj zoo tshaj plaws. Tsis tas li ntawd, yog tias koj muaj lus nug / cov lus pom zoo txog tsab xov xwm no, koj tuaj yeem xa lawv mus rau hauv nqe lus.