When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Outdated Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe Ikona.
2. If the status is set to Nije povezano, Klikni na Network globe icon, choose your Wi-Fi network and click on Connect button. Make sure Zrakoplovni način nije uključen.
3. If you again face the same network connection error code, then click on the Odvojite button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Desnom tipkom miša kliknite Ikona Wi-Fija i odaberite Open Network & Internet settings.
6. Kliknite na Wi-Fi.
7. Scroll down the right menu, click on Upravljanje poznatim mrežama.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Zaboraviti.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metoda 2: Ponovno pokrenite usmjerivač
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Bilješka: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Naći tipka za uključivanje na stražnjoj strani vašeg usmjerivača.
2. Pritisnite tipku jednom za ugasi to.
3. Sada, isključiti vaš Router power cable i pričekajte dok se kondenzatori potpuno ne isprazne.
4. Zatim, reconnect o kabel za napajanje i uključite ga nakon minute.
5. Pričekajte dok se mrežna veza ponovno ne uspostavi i pokušajte se ponovno prijaviti.
Također pročitajte: Fix Computers Not Showing Up on Network in Windows 10
3. metoda: Pokrenite alat za rješavanje problema s mrežom
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Pritisnite Windows tipka i vrsta Otkrivanje problema u traci za pretraživanje i Otvorena.
2. Kliknite na Dodatni alati za rješavanje problema.
3. odabrati Network Adapter i kliknite na Pokrenite alat za otklanjanje poteškoća.
4. Select the network adapter to diagnose i kliknite na Sljedeći.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, kliknite na Zatvoriti alat za rješavanje problema.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Također pročitajte: Rješavanje problema obiteljskog dijeljenja YouTube TV-a koji ne radi
Metoda 4: Popravak sistemskih datoteka
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Servisiranje i upravljanje slaganjem) utilities on your Windows 10 PC.
1. Pritisnite Windows tipkatipa Command Prompt i kliknite na Pokreni kao administrator.
2. Kliknite na Da u Kontrola korisničkih računa brz.
3. Tip chkdsk C: / f / r / x zapovjedi i pogodi Enter tipka.
4. Ako se od vas zatraži poruka, Chkdsk se ne može pokrenuti...volumen je... u procesu upotrebe, zatim upišite Y i pogodio Enter tipka.
5. Ponovno upišite naredbu: sfc / scannow i pritisnite Enter tipka pokrenuti System File Checker skenirati.
Bilješka: Pokrenut će se skeniranje sustava i trebat će nekoliko minuta da završi. U međuvremenu, možete nastaviti obavljati druge aktivnosti, ali pazite da slučajno ne zatvorite prozor.
Nakon dovršetka skeniranja prikazat će se jedna od ovih poruka:
- Windows Resource Protection nije otkrio povrede integriteta.
- Zaštita resursa sustava Windows nije mogla izvesti traženu operaciju.
- Zaštita resursa sustava Windows pronašla je oštećene datoteke i uspješno ih popravila.
- Windows Resource Protection pronašla je korumpirane datoteke, ali nije uspjela popraviti neke od njih.
6. Nakon što skeniranje završi, restart vaše računalo.
7. Opet, lansiranje Command Prompt kao administrator i izvršavati zadane naredbe jednu za drugom:
dism.exe /Online /cleanup-image /scanhealth dism.exe /online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Bilješka: Morate imati ispravnu internetsku vezu da biste ispravno izvršavali DISM naredbe.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Pritisnite Windows tipka i vrsta Upravitelj uređaja in the Windows search menu. Click on Otvoren.
2. Proširite Mrežni adapteri odjeljak dvostrukim klikom na njega.
3. Desnom tipkom miša kliknite svoj Mrežni upravljački program (na primjer, Intel (R) Dual Band Wireless-AC 3168) I odaberite Onemogućivanje uređaja opcija.
4. Confirm the below prompt by clicking on Da.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Omogući uređaj opcija.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Također pročitajte: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Idite na izbornik pretraživanja i upišite cmd. Kliknite na Pokreni kao administrator.
2. Upišite sljedeće naredbe i pogodio Enter tipka.
reset netsh winsock Netscape int ip reset ipconfig / release ipconfig / renew
3. Pričekajte da se naredbe izvrše i ponovno pokrenite računalo.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. lansiranje Command Prompt by searching in the Windows meni and click on Run as administrator.
2. Tip ipconfig / flushdns in the command window and hit ući.
Također pročitajte: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Pokrenite trčanje dijaloški okvir pritiskom na Tipke Windows + R zajedno.
2. Tip ncpa.cpl i pogodio Enter tipka.
3. Right-click on your active mrežni adapter i kliknite na Nekretnine.
4. Poništite Internet protokol verzija 6 (TCP / IPv6) opcija.
5. Na kraju kliknite na OK to save the changes and check if the issue is resolved.
Bilješka: If you use multiple network connections, navigate to Mreža i Centar za dijeljenje i Promijenite adapter settings. Right-click on the adapter and select Onesposobiti. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tip Upravitelj uređaja in the Windows search menu and click Otvoren.
2. Dvaput kliknite na Mrežni adapteri da ga proširim.
3. Desnom tipkom miša kliknite svoj vozač (npr Intel (R) Dual Band Wireless-AC 3168) i kliknite Ažuriraj upravljački program.
4. Kliknite na Potražite upravljačke programe na mom računalu to locate and install a driver manually.
5. Kliknite na preglednik button to choose any directory and click on Sljedeći.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Najbolji upravljački programi za vaš uređaj već su instalirani.
6. Kliknite na Blizu za izlazak iz prozora.
7. Restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. lansiranje Upravitelj uređaja from the Windows search menu.
2. Desnom tipkom miša kliknite vozač i odaberite Deinstalirajte uređaj.
3. A warning prompt will be displayed on the screen. Check the box “Izbrišite upravljački program za ovaj uređaj” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Posjetite proizvođača.
2. naći i Preuzimanje upravljačke programe koji odgovaraju verziji sustava Windows na vašem računalu.
3. Once downloaded, double click on the preuzetu datoteku and follow the given instructions to install it.
Također pročitajte: How to set up a VPN on Windows 10
Metoda 10: Ažurirajte Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. pritisni Windows + I Tipke zajedno otvoriti Postavke na računalu.
2. odabrati Ažuriranje i sigurnost.
3. odabrati Provjeri ažuriranja.
4A. Click Instaliraj sada za preuzimanje i instaliranje najnovijeg dostupnog ažuriranja.
4B. Ako je vaš sustav već ažuriran, to će se pokazati U toku ste poruka.
Metoda 11: Deinstalirajte nedavna ažuriranja
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pritisnite i držite Tipke Windows + R zajedno otvoriti trčanje dijaloški okvir.
2. Tip appwiz.cpl i pogodio ući.
3. Kliknite na Prikaz instaliranih ažuriranja.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and ponovno pokrenite računalo.
Također pročitajte: Kako popraviti da Firefox ne učitava stranice
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the mrežni adapteri installed in your PC along with their settings. All the stored settings are stored to default settings.
Bilješka: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Postavke tada sistem i O nama. Once you have reset your network, you have to reinstall all networking software kao VPN klijenti or Virtualni prekidači.
1. Pritisnite i držite Tipke Windows + I zajedno otvoriti Windows Settings.
2. Kliknite na Mreža i Internet.
3. Kliknite na Ponovno postavljanje mreže pod status.
4. Confirm the prompt by clicking on Poništi sada.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Preporučena:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.