Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Ponovno pokrenite i odaberite odgovarajući uređaj za pokretanje [RIJEŠENO]
Metoda 1: Postavite točan redoslijed pokretanja
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Kada se vaše računalo pokrene (prije zaslona za pokretanje ili zaslona s pogreškom), više puta pritisnite tipku Delete ili F1 ili F2 (ovisno o proizvođaču vašeg računala) da unesite postavke BIOS-a.
2. Nakon što ste u BIOS postavci odaberite karticu Boot s popisa opcija.
3. Sada provjerite je li računalo Tvrdi disk ili SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, ako ne onda nastavi.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Da biste pokrenuli Dijagnostiku, ponovno pokrenite računalo i dok se računalo pokreće (prije ekrana za pokretanje), pritisnite tipku F12 i kada se pojavi izbornik za pokretanje, označite opciju Boot to Utility Partition ili opciju Dijagnostika i pritisnite enter za pokretanje dijagnostike. Ovo će automatski provjeriti sav hardver vašeg sustava i javiti ako se pronađe bilo kakav problem.
Preporučena: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Važno: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Umetnite instalacijski DVD za pokretanje sustava Windows 10 i ponovno pokrenite računalo.
2. Kada se od vas zatraži da pritisnete bilo koju tipku za pokretanje s CD-a ili DVD-a, pritisnite bilo koju tipku za nastavak.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Ponovno pokrenite i uspjeli ste Fix Reboot and Select Proper Boot Device issue, ako ne, nastavi.
Također pročitajte Kako popraviti Automatski popravak nije mogao popraviti vaše računalo.
Metoda 5: Omogućite UEFI Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
Promijenite opciju Boot list u UEFI Disable Load Legacy option ROM Enable Secure boot
3. Zatim dodirnite F10 za spremanje i izlaz iz postavki pokretanja.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Bilješka: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metoda 7: Popravak instalacije sustava Windows 10
Ako vam nijedno od gore navedenih rješenja ne odgovara, možete biti sigurni da je vaš HDD u redu, ali možda vidite grešku "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” jer su operativni sustav ili BCD podaci na HDD-u nekako izbrisani. Pa, u ovom slučaju, možete pokušati popraviti instalaciju Windowsa, ali ako ni to ne uspije, jedino preostalo rješenje je instalirati novu kopiju Windowsa (Čista instalacija).
To je to što uspješno imate Popraviti Reboot and Select proper Boot device issue ali ako još uvijek imate bilo kakvih pitanja u vezi s ovom objavom, slobodno ih postavite u odjeljku za komentare.