When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistèm operasyon demode.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Pa konekte, klike sou la Network globe icon, choose your Wi-Fi network and click on Konekte button. Make sure Mòd avyon pa vire sou li.
3. If you again face the same network connection error code, then click on the dekonekte button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Dwa-klike sou la Wi-Fi icon epi chwazi Open Network & Internet settings.
6. Klike sou Wi-Fi.
7. Scroll down the right menu, click on Jere rezo yo konnen.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Bliye.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metòd 2: Rekòmanse routeur
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Remak: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. jwenn nan Pouvwa bouton at the back of your router.
2. Press the button once to fèmen li.
3. Koulye a, dekonekte ou Router power cable epi tann jiskaske pouvwa a konplètman vide nan kondansateur yo.
4. Lè sa a, rekonekte nan kab pouvwa epi chanje li apre yon minit.
5. Wait until the network connection is re-established and try signing in again.
Epitou Li: Ranje òdinatè ki pa parèt sou rezo a nan Windows 10
Metòd 3: Kouri Rezo depanaj
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Frape a Windows kle ak kalite Rézoudr anviwònman yo nan ba rechèch la ak Louvri.
2. Klike sou Lòt rézoudr.
3. Chwazi Network Adapter , epi klike sou Kouri rézèsisè a.
4. Select the network adapter to diagnose , epi klike sou Next.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, klike sou Fèmen rezolveur la.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Epitou Li: Ranje fanmi pataje YouTube TV pa travay
Metòd 4: Reparasyon dosye sistèm yo
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistèm File Checker) /DISM (Jesyon Imaj Devlopman ak Jesyon) utilities on your Windows 10 PC.
1. Frape a Windows klekalite Kòmand rapid , epi klike sou Kouri kòm administratè.
2. Klike sou Wi nan Itilizatè Kont kontwòl rapid.
3. Kalite chkdsk C: / f / r / x kòmande ak frape Antre kle.
4. Si yo mande w ak yon mesaj, Chkdsk pa ka kouri... volim nan... nan pwosesis itilize, Lè sa a, tape Y ak frape a Antre kle.
5. Ankò, tape kòmandman an: sfc / scannow ak laprès Antre kle kouri nan Sistèm File Checker eskane.
Remak: Yon eskanè sistèm pral inisye epi li pral pran kèk minit pou fini. Pandan se tan, ou ka kontinye fè lòt aktivite men ou dwe sonje pa aksidantèlman fèmen fenèt la.
Apre w fin fè eskanè a, li pral montre youn nan mesaj sa yo:
- Pwoteksyon Resous Windows pa jwenn okenn vyolasyon entegrite.
- Pwoteksyon Resous Windows pa t 'kapab fè operasyon yo mande a.
- Pwoteksyon Resous Windows te jwenn dosye koripsyon epi li te repare yo avèk siksè.
- Pwoteksyon Resous Windows te jwenn dosye koripsyon men li pa t 'kapab ranje kèk nan yo.
6. Yon fwa eskanè a fini, rekòmanse PC ou.
7. Ankò, lanse Kòmandman Èd Memwa kòm administratè epi egzekite kòmandman yo bay youn apre lòt:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Remak: Ou dwe gen yon koneksyon entènèt k ap travay pou egzekite kòmandman DISM byen.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Frape a Windows kle ak kalite Manadjè Aparèy in the Windows search menu. Click on louvri.
2. Elaji a Cartes rezo seksyon pa doub-klike sou li.
3. Dwa-klike sou ou Chofè rezo a (pa egzanp, Intel (R) Dual Band Wireless-AC 3168) epi chwazi a Enfim aparèy opsyon.
4. Confirm the below prompt by clicking on Wi.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Pèmèt aparèy opsyon.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Epitou Li: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Ale nan meni rechèch la epi tape km. Klike sou Kouri kòm administratè.
2. Tape sa ki annapre yo kòmandman yo ak frape a Antre kle.
Netsh winsock réinitialiser Netsh int ip reset ipconfig / lage ipkonfig / renouvle
3. Tann pou kòmandman yo dwe egzekite ak rdemare PC ou.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lanse Kòmand rapid by searching in the Windows meni and click on Run as administrator.
2. Kalite ipconfig / flushdns in the command window and hit Antre nan.
Epitou Li: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Lanse a kouri bwat dyalòg pa peze Windows + R kle ansanm.
2. Kalite ncpa.cpl ak frape Antre kle.
3. Right-click on your active adaptè rezo a , epi klike sou Pwopriyete.
4. Dezaktive la Pwotokòl Entènèt Version 6 (tchp / IPv6) opsyon.
5. Finalman, klike sou OK to save the changes and check if the issue is resolved.
Remak: If you use multiple network connections, navigate to Rezo ak Patnè Sant ak Chanje adaptè settings. Right-click on the adapter and select Enfim. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Kalite Manadjè Aparèy in the Windows search menu and click louvri.
2. Double klike sou la Cartes rezo yo elaji li.
3. Dwa-klike sou ou chofè (eg Intel (R) Doub Band Wireless-AC 3168) epi klike Mete ajou chofè.
4. Klike sou Browse òdinatè mwen an pou chofè yo to locate and install a driver manually.
5. Klike sou la Navigatè button to choose any directory and click on Next.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Pi bon chofè yo pou aparèy ou an deja enstale.
6. Klike sou Fèmen sòti fenèt la.
7. Rekòmanse the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lanse Manadjè Aparèy from the Windows search menu.
2. Dwa-klike sou la chofè epi chwazi Désinstaller aparèy.
3. A warning prompt will be displayed on the screen. Check the box “Efase lojisyèl chofè a pou aparèy sa a” and confirm the prompt by clicking Enstriksyon.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Vizite nan sit entènèt manifakti a.
2. Jwenn ak download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the dosye telechaje and follow the given instructions to install it.
Epitou Li: How to set up a VPN on Windows 10
Metòd 10: Mete ajou Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Peze la Windows + mwen kle ansanm pou ouvri Anviwònman sou òdinatè w lan.
2. Chwazi Mizajou & Sekirite Sosyal.
3. Chwazi Tcheke pou Updates.
4A. Click Enstale kounye a pou telechaje ak enstale dènye aktyalizasyon ki disponib.
4B. Si sistèm ou a deja ajou, Lè sa a, li pral montre Ou ajou mesaj.
Metòd 11: Désinstaller Dènye Mizajou
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Peze epi kenbe Windows + R kle ansanm pou louvri kouri bwat dyalòg.
2. Kalite appwiz.cpl ak frape Antre nan.
3. Klike sou Wè enstale dènye enfòmasyon.
4. Select the most recent update and click on Enstriksyon.
5. Confirm the prompt, if any, and rdemare PC a.
Epitou Li: Ki jan yo ranje Firefox pa chaje paj
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the cartes rezo installed in your PC along with their settings. All the stored settings are stored to default settings.
Remak: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Anviwònman lè sa a, Sistèm ak A Pwopo. Once you have reset your network, you have to reinstall all networking software tankou VPN kliyan or Vityèl switch.
1. Peze epi kenbe Windows + I kle ansanm pou ouvri Anviwònman Windows.
2. Klike sou Rezo & Entènèt.
3. Klike sou Reyajiste rezo a anba Ki dènye nouvèl.
4. Konfime èd memwa a pa klike sou Reyajiste kounye a.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Rekòmande:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.