Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Reboot and Select Proper Boot Device Issue [SOLVED]
Method 1: Set Correct Boot Order
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Lè òdinatè w lan kòmanse (Anvan ekran bòt la oswa ekran erè a), plizyè fwa peze Efase oswa F1 oswa F2 kle (Depann sou manifakti òdinatè w lan) pou antre nan konfigirasyon BIOS.
2.Yon fwa ou nan konfigirasyon BIOS chwazi tab Boot nan lis la nan opsyon.
3.Now asire w ke òdinatè a Disk di oswa SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, si se pa Lè sa a, kontinye.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Pou kouri Dyagnostik rekòmanse PC ou a epi kòm òdinatè a kòmanse (anvan ekran bòt la), peze kle F12 epi lè meni an Boot parèt, mete aksan sou opsyon nan Boot to Utility Partition oswa opsyon Dyagnostik la epi peze antre pou kòmanse Diagnostics yo. Sa a pral tcheke otomatikman tout pyès ki nan konpitè nan sistèm ou an epi yo pral rapòte tounen si yo jwenn nenpòt pwoblèm.
Rekòmande: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Enpòtan: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Mete DVD enstalasyon demaraj Windows 10 la epi rekòmanse PC ou.
2.Lè yo mande pou peze nenpòt kle nan bòt soti nan CD oswa DVD, peze nenpòt kle yo kontinye.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Rekòmanse epi ou gen siksè Fix Reboot and Select Proper Boot Device issue, if not, continue.
Epitou, li Ki jan yo ranje Reparasyon Otomatik pa t 'kapab repare PC ou.
Metòd 5: Pèmèt UEFI Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
Chanje opsyon lis bòt an UEFI Enfim chaj eritaj opsyon ROM Pèmèt bòt an sekirite
3.Next, tape F10 pou sove epi sòti konfigirasyon bòt la.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Remak: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metòd 7: Reparasyon Enstale Windows 10
Si okenn nan solisyon ki anwo yo pa travay pou ou, ou ka asire w ke HDD ou a anfòm men ou ka wè erè a "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” paske sistèm operasyon an oswa enfòmasyon BCD sou HDD a te yon jan kanmenm efase. Oke, nan ka sa a, ou ka eseye Reparasyon enstale Windows men si sa a tou echwe Lè sa a, solisyon an sèlman ki rete se enstale yon nouvo kopi Windows (Netwaye Enstale).
Se sa ou genyen avèk siksè Ranje Reboot and Select proper Boot device issue but if you still have any queries regarding this post feel free to ask them in the comment’s section.