When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Elavult operációs rendszer.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikonra.
2. If the status is set to Nem kapcsolódik, kattintson a Network globe icon, choose your Wi-Fi network and click on Csatlakozás button. Make sure Repülőgép üzemmód nincs bekapcsolva.
3. If you again face the same network connection error code, then click on the Húzza ki button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Kattintson a jobb gombbal a Wi-Fi ikon és válassza ki a Open Network & Internet settings.
6. Kattintson Wi-Fi.
7. Scroll down the right menu, click on Ismert ismert hálózatok kezelése.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Elfelejt.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Jegyzet: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Keresse meg a Bekapcsoló gomb az útválasztó hátulján.
2. Nyomja meg egyszer a gombot kapcsold ki.
3. Most, húzza a te Router tápkábel és várja meg, amíg az áram teljesen lemerül a kondenzátorokból.
4. Ezután dugja a tápkábel és egy perc múlva kapcsolja be.
5. Várja meg, amíg a hálózati kapcsolat helyreáll, majd próbáljon meg újra bejelentkezni.
Is Read: Fix Computers Not Showing Up on Network in Windows 10
3. módszer: Futtassa a hálózati hibaelhárítót
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Nyomja meg a Windows gomb és típusa Hibaelhárítás a beállításokkal a keresősávban és Nyissa meg.
2. Kattintson További hibaelhárítók.
3. választ Network Adapter és kattintson Futtassa a hibaelhárítót.
4. Select the network adapter to diagnose és kattintson Következő.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, kattintson Hibaelhárító bezárása.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Is Read: A családi megosztás nem működő YouTube TV-jének javítása
4. módszer: Rendszerfájlok javítása
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (A rendszerfájl-ellenőrző) /DISM (Üzembe helyezés és karbantartás) utilities on your Windows 10 PC.
1. Nyomja meg a Windows gomb, típus Parancssor és kattintson Futtatás rendszergazdaként.
2. Kattintson Igen a User Account Control gyors.
3. típus chkdsk C: / f / r / x parancsot és ütést Enter gomb.
4. Ha a rendszer üzenetet kér, A Chkdsk nem fut… a kötet… használatban van, majd írja be Y és nyomja meg a Enter gomb.
5. Ismét írja be a parancsot: sfc / scannow és nyomja meg az Enter gomb futtatni a A rendszerfájl-ellenőrző letapogatás.
Jegyzet: A rendszer egy rendszerellenőrzést indít, és néhány percet vesz igénybe. Eközben folytathat más tevékenységeket, de ügyeljen arra, hogy véletlenül se zárja be az ablakot.
A vizsgálat befejezése után az alábbi üzenetek valamelyike jelenik meg:
- A Windows erőforrás-védelme nem talált integritás-megsértést.
- A Windows Resource Protection nem tudta végrehajtani a kért műveletet.
- A Windows Resource Protection sérült fájlokat talált, és sikeresen kijavította azokat.
- A Windows Erőforrás-védelem sérült fájlokat talált, de néhányat nem sikerült kijavítani.
6. Ha a beolvasás befejeződött, újraindítás a számítógépére.
7. Ismét indítsa el Parancssor adminisztrátorként és egymás után hajtsa végre a megadott parancsokat:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Jegyzet: A DISM-parancsok megfelelő végrehajtásához működő internetkapcsolattal kell rendelkeznie.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Nyomja meg a Windows gomb és típusa Eszközkezelő in the Windows search menu. Click on Nyisd ki.
2. Bontsa ki a hálózati adapterek részben kattintson rá duplán.
3. Kattintson jobb gombbal a sajátjára hálózati meghajtó (például, Intel (R) Dual Band Wireless-AC 3168) És válassza ki a Az eszköz kikapcsolása opciót.
4. Confirm the below prompt by clicking on Igen.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Eszköz engedélyezése opciót.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Is Read: Fix Windows could not automatically detect this Network’s Proxy settings
6. módszer: Állítsa vissza az ipconfig-ot
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Lépjen a keresés menübe, és írja be cmd. Kattints a Futtatás rendszergazdaként.
2. Írja be a következőket parancsok és nyomja meg a Enter gomb.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Várja meg a parancsok végrehajtását, majd indítsa újra a számítógépet.
7. módszer: Öblítse ki a DNS-gyorsítótárat
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Dob Parancssor by searching in the Windows menü and click on Run as administrator.
2. típus ipconfig / flushdns in the command window and hit belép.
Is Read: [SOLVED] Windows detected a hard disk problem
8. módszer: Az IPv6 letiltása
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Indítsa el a futás párbeszédpanel megnyomásával Windows + R billentyűk együtt.
2. típus ncpa.cpl parancsot és megüt Enter gomb.
3. Right-click on your active hálózati adapter és kattintson Ingatlanok.
4. Törölje a jelet Internet Protocol 6-es verzió (TCP / IPv6) opciót.
5. Végül kattintson a gombra OK a módosítások mentéséhez, és ellenőrizze, hogy a probléma megoldódott-e.
Jegyzet: If you use multiple network connections, navigate to Hálózati és megosztási központ és a Cserélje ki az adaptert settings. Right-click on the adapter and select Kikapcsolja. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. típus Eszközkezelő in the Windows search menu and click Nyisd ki.
2. Kattintson duplán a hálózati adapterek bővíteni.
3. Kattintson jobb gombbal a sajátjára gépkocsivezető (például Intel (R) Dual Band vezeték nélküli AC 3168), majd kattintson a gombra Illesztőprogram frissítése.
4. Kattintson Böngésszen a számítógépemben az illesztőprogramok után to locate and install a driver manually.
5. Kattintson a böngésző button to choose any directory and click on Következő.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Az eszköz legjobb illesztőprogramjai már telepítve vannak.
6. Kattintson közel az ablakból való kilépéshez.
7. Újraindítás the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Dob Eszközkezelő from the Windows search menu.
2. Kattintson a jobb gombbal a gépkocsivezető és válassza ki a Eszköz eltávolítása.
3. A warning prompt will be displayed on the screen. Check the box “Törölje az eszközhöz tartozó illesztőprogramot” és kattintson a gombra, és erősítse meg a kérést Uninstall.
4. Töltse le és telepítse az illesztőprogramokat eszközére manuális vagy automatikus frissítéssel.
5. Látogassa meg a gyártó honlapján.
2. Találjon és a Letöltés a Windows verziójának megfelelő illesztőprogramokat a számítógépen.
3. A letöltés után kattintson duplán a letöltött fájl and follow the given instructions to install it.
Is Read: How to set up a VPN on Windows 10
10. módszer: Frissítse a Windows rendszert
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. megnyomni a A Windows + I kulcsok együtt nyitni beállítások A számítógépén.
2. választ Frissítés és biztonság.
3. választ Frissítések.
4A. Click Telepítés most to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Ön naprakész üzenet.
Method 11: Uninstall Recent Updates
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. nyomja meg és tartsa Windows + R billentyűk együtt kinyitni a futás párbeszédablak.
2. típus appwiz.cpl szöveget és megüt belép.
3. Kattintson A telepített frissítések.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and indítsa újra a számítógépet.
Is Read: Hogyan lehet javítani a Firefox nem tölt be oldalakat
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the hálózati adapterek installed in your PC along with their settings. All the stored settings are stored to default settings.
Jegyzet: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to beállítások akkor rendszer és a Rólunk . Once you have reset your network, you have to reinstall all networking software mint VPN kliensek or Virtuális kapcsolók.
1. nyomja meg és tartsa Windows + I billentyűk együtt nyitni A Windows beállításai.
2. Kattintson Hálózat és Internet.
3. Kattintson Hálózat visszaállítása alatt Állapot.
4. A gombra kattintva erősítse meg a kérést Állítsa be most.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Ajánlott:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.