After installing the latest Windows feature update, your PC may be trapped in an automated repair cycle. This article will give you various troubleshooting techniques if you’re attempting to locate a repair approach that will allow you to resolve diagnosing your PC Windows 10 issue. So, continue reading to fix diagnosing your PC stuck issue on Windows 10.
How to Fix Stuck on Diagnosing your PC in Windows 10
We looked into this diagnosing your PC stuck issue by looking at multiple user reports and tried various repair strategies suggested by some impacted users. As it turns out, various conditions make your system trapped inside the diagnosing your PC screen. Here’s a list of circumstances that might lead to this issue on A windows 10.
- Rendszerfájl sérülés: Corrupted system files might also cause the System Diagnostic tool to appear at every system start-up. If this utility is also corrupted, it will be stuck in a loop.
- Inadequate System Space: As it turns out, this problem of this issue can also arise when the system lacks sufficient storage capacity to load all the programs and services required for the starting operation.
- Glitched Automated Repair Utility: This issue has been reported by multiple customers to be caused by mysterious system drive troubles. In this instance, the Automatic Repair program will try to open at every restart in an attempt to fix the problem, but it will be unable to locate the source of the problem.
- Faulty BCD Data: Corrupted booting data might also cause this issue in severe conditions, which prevents the starting process from finishing.
Some afflicted customers have attempted rebooting their computers to get rid of this problem but have claimed that their computers go into a dark screen, show the logo, and then return to the Diagnostic PC page. The operating system indicates that your device has been diagnosed, but there might be no progress made. You can follow the below methods to resolve the issue.
Method 1: Perform Hard Reboot
You can do a hard reboot if your Windows is unable to boot due to the Preparing Automatic Repair or Diagnosing your PC issue.
1. Húzza ki a AC adapter és távolítsa el a akkumulátor a készülékből.
2. Check if it boots up normally by pressing and holding the bekapcsoló gomb mert 20 másodperc.
If this technique fails, try one of the following options.
Is Read: A WDF_VIOLATION hiba kijavítása a Windows 10 rendszerben
2. módszer: Indítsa el a rendszert csökkentett módban és ürítse ki a területet
As some users have discovered, this issue can also occur when the system does not have enough capacity to start. Several individuals in a similar position have overcome the problem by running their machines in Safe Mode and freeing up some space. Follow our guide on How to Boot to Safe Mode in Windows 10.
Then, perform Disk cleanup by following our guide to run Disk Cleanup.
If diagnosing your PC Windows 10 problem persists, follow the next procedure below.
3. módszer: Rendszerfájlok javítása
It’s also possible that this problem is caused by System File corruption. These corrupted files might prevent the booting procedure from finishing. You’ll have to run the scans before the Booting phase since you can’t go beyond the Diagnostics page. Read our guide on How to Repair System Files on Windows 10.
Is Read: A számítógép nem szinkronizált újra, mert nem áll rendelkezésre időadat
Method 4: Run System Restore Utility
You may be dealing with a serious corruption problem that can’t be treated traditionally. When faced with a circumstance like this, the best action is to take a damage-control strategy. Most start-up troubles caused by system file corruption can be resolved by returning the machine to a healthy condition in which all components are working properly. Follow the below steps.
1. Helyezze be a telepítő lemez és a indítsa újra a számítógépet.
2. Nyomja meg bármelyik gombot kulcs to start up the installation media when you see the booting screen.
3. When Windows Setup has finished loading, click on Számítógép javítása.
4. Nyissa meg a Elhárítása menu from the first repair menu.
5. Kattintson Speciális beállítások from the Troubleshoot menu.
6. Ezután kattintson a gombra Parancssor from the list of available utilities.
7. Nyissa meg a rendszer-visszaállítás program, type the rstrui.exe parancsot a Parancssor ablakot, és nyomja meg a gombot Enter gomb.
8. Kattintson Következő once you’ve reached the first screen.
9. Most, Jelöld be the option labeled Mutass több visszaállítási pontok.
10. Once you’ve done so, go through each restoration snapshot and pick one taken before the Diagnostics problem.
11. To go on to the next option, choose the suitable és kattintson Következő.
12. Most kattintson a gombra befejez.
Your system will restart automatically after restoring, and the old machine will be fixed at the next system starting.
5 módszer: BCD újjáépítése
In Windows 10, you’ll get the Preparing Automatic Repair error if the boot files are missing or damaged. As a result, some users will re-build the boot record using the procedures below.
1. Insert the Windows bootable installation CD into the PC displaying the error message Preparing Automatic Repair or Diagnosing your PC.
2. Start your computer by booting from the telepítő CD.
3. To continue, choose your nyelv beállításokat, és kattintson a gombra Következő gombot.
4. választ Javítás a számítógéped.
5. választ Elhárítása.
6. választ Parancssor.
7. Enter the instructions below into the prompt, and press the Enter gomb mindegyik után.
Bootrec / fixmbr Bootrec / fixboot bootrec / scanos bootrec / RebuildBcd
8. Then, type the command kijárat és nyomja meg a gombot Enter gomb.
9. Végül: indítsa újra a számítógépet.
Is Read: A 80072ee2 számú Windows frissítési hiba kijavítása
6. módszer: Az automatikus indítási javítás letiltása
If this happens, the Automatic Start-up Repair software will launch at every system start-up. However, if the utility is broken, you might not be able to go past the start-up screen. Therefore, disabling this software would prevent the Diagnosing your PC screen from appearing.
1. As soon as you see the introductory screen, press the F8 key repeatedly to get to the Speciális rendszerindítási beállítások menüben.
2. választ Safe Mode a hálózatépítéssel from the Advanced Boot Options menu by pressing the F5 billentyű or using the arrow keys.
3. When the booting routine is complete, press Windows + I billentyűk elindítani a Futtatás párbeszédpanel.
4. típus cmd és megüt Ctrl + Shift + Enter billentyűk to open an emelt parancssort.
5. Kattintson Igen a promptban.
6. Írja be a következőket parancs és nyomja meg az Enter gomb.
bcdedit /set recoveryenabled NO
7. Once the process is complete, újraindítás A Te eszközöd.
If diagnosing your PC Windows 10 problem persists or you don’t get a different error, continue the next procedure.
Method 7: Uninstall Updates
If the update fails to install properly on your device, you might face this issue. Follow the below steps to resolve the discussed issue.
1. Nyomja meg a Windows gomb és típusa Control Panel, majd kattintson a gombra Nyisd ki.
2. Most kattintson a gombra Uninstall a program lehetőség a Programok ábra szerinti menü.
3. Most kattintson a gombra A telepített frissítések a bal oldali ablaktáblában az ábra szerint.
4. Most keresse meg és válassza ki a legújabb frissítést a hivatkozással Installed On the date and clicking on Uninstall opciót az alábbiak szerint.
5. Végül erősítsen meg minden kérést, és indítsa újra a számítógépet.
Check if diagnosing your PC stuck issue persists or not.
Is Read: 7 módszer a iaStorA.sys BSOD-hiba javítására Windows 10 rendszeren
Method 8: Perform Repair Install
If none of the above-mentioned repair methods have worked, you’re probably dealing with a serious case of system corruption that can’t be fixed using normal methods. In this case, the only way to repair the problem is to reset every Windows component, including any booting-related tasks causing the Automatic Repair loop. You may always perform a clean installation but bear in mind that doing so will lose any saved data within your Windows system. If you choose a clean install, all your personal data, applications, games, documents, and other media will disappear. Read our guide on How to do a Clean Install of Windows 10 and implement the same.
Ajánlott:
We hope you found this information useful and that you were able to resolve stuck on diagnosing your PC in Windows 10 problem. Please let us know which technique was the most beneficial for you. Please use the form below if you have any queries or comments. Also, let us know what you want to learn next.