Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
Győződjön meg róla, hogy hozzon létre egy visszaállítási pontot arra az esetre, ha valami baj lenne.
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
Jegyzet: Backup the registry just in case something goes wrong.
1. Nyomja meg a Windows Key + R billentyűkombinációt, majd írja be regedit és nyomja meg az Enter billentyűt a Rendszerleíróadatbázis-szerkesztő megnyitásához.
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3. Ügyeljen arra, hogy válassza ki {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find UpperFilters és Lower Filters.
4. Kattintson a jobb gombbal mindegyikre, és válassza ki Törlése.
5. A változtatások mentéséhez indítsa újra a számítógépet.
2. módszer: Futtassa a Rendszer-visszaállítást
1. Nyomja meg a Windows Key + R billentyűkombinációt, és írja besysdm.cpl”, majd nyomja meg az Enter billentyűt.
2. Válassza ki System Protection lapot és válasszon Rendszer-visszaállítás.
3. Kattintson a Tovább gombra, és válassza ki a kívántat Rendszer-visszaállítási pont.
4. Kövesse a képernyőn megjelenő utasításokat a rendszer-visszaállítás befejezéséhez. És nézd meg, képes vagy-e Fix USB Error Code 52 Windows cannot verify the digital signature, ha nem, folytassa az alább felsorolt módszerekkel.
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#FIGYELEM: A Secure Boot letiltása után nehéz lehet a Secure Boot újraaktiválása a számítógép gyári állapotának visszaállítása nélkül.
3.Restart your PC and see if you’re able to Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on Bekapcsoló gomb then hold műszak és kattintson Újraindítás (while holding the shift button).
2. Ügyeljen arra, hogy ne engedje el a Shift gombot, amíg meg nem látja a Speciális helyreállítási beállítások menü.
3. Most lépjen a következőhöz a Speciális helyreállítási beállítások menüben:
Hibaelhárítás > Speciális beállítások > Indítási beállítások > Újraindítás
4. Miután rákattint az Újraindítás gombra, a számítógép újraindul, és egy kék képernyő jelenik meg a lehetőségek listájával, győződjön meg róla, hogy nyomja meg a számbillentyűt a következő opció mellett.Az illesztőprogram aláírásának végrehajtásának letiltása."
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc és nyomja meg az Enter billentyűt az Eszközkezelő megnyitásához.
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select Illesztőprogram frissítése.
7. Válassza a „Automatikusan keressen frissített illesztőprogramot."
8.Repeat the above process for every problematic device listed in Device Manager.
9. Indítsa újra a számítógépet a módosítások mentéséhez, és ellenőrizze, hogy képes-e rá Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1. Nyomja meg a Windows Key + R billentyűkombinációt, majd írja be devmgmt.msc és nyomja meg az Enter billentyűt.
2. Kattintson a jobb gombbal each of problematic device (yellow exclamation mark next to it) and select Eltávolítás.
3.Click Yes/OK to continue with uninstallation.
4. A változtatások mentéséhez indítsa újra a számítógépet.
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys fájlokat usbehciold.sys & usbhubold.sys.
3. Nyomja meg a Windows Key + R billentyűkombinációt, majd írja be devmgmt.msc és nyomja meg az Enter billentyűt.
4.Bővítse ki Univerzális soros buszvezérlők majd kattintson a jobb gombbal a gombra Standard Enhanced PCI to USB Host Controller és válassza ki a Eltávolítás.
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2. Most írja be a következőket a cmd-be, és nyomja meg az Enter billentyűt:
Sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:windows
3. Várja meg, amíg a fenti folyamat befejeződik, majd indítsa újra a számítógépet.
4. Ezután futtassa a CHKDSK-t innen Javítsa ki a fájlrendszer-hibákat a Check Disk Utility (CHKDSK) segítségével.
5. Hagyja befejezni a fenti folyamatot, majd indítsa újra a számítógépet a módosítások mentéséhez.
Nézd meg, képes vagy-e Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1. Nyomja meg a Windows Key + X billentyűkombinációt, majd válassza ki Parancssor (Admin).
2.Type the following command into cmd and hit Enter after each one:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TEST SIGNING ON
3.If the above command doesn’t work then try the following:
bcdedit /deletevalue loadoptions
bcdedit -set TEST SIGNING OFF
4. A változtatások mentéséhez indítsa újra a számítógépet.
Neked ajánlott:
Ez az, ami sikeresen megvan Fix USB Error Code 52 Windows cannot verify the digital signature de ha továbbra is bármilyen kérdése van ezzel az útmutatóval kapcsolatban, nyugodtan tegye fel őket a megjegyzés szakaszban.