Փետրվարի 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Համոզվեք, որ ստեղծեք վերականգնման կետ, միայն այն դեպքում, եթե ինչ-որ բան սխալ լինի:

Նշում: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Մեթոդ 1. Անջատեք արագ գործարկումը

1.Press Windows Key + R then type control and hit Enter to open Վերահսկիչ խորհուրդը:

կառավարման վահանակ

2 սեղմել Սարքավորումներ եւ հնչյուններ ապա կտտացրեք Power Options- ը.

իշխանության ընտրանքներ կառավարման վահանակում

3. Այնուհետև ձախ պատուհանի պատուհանից ընտրեք «Ընտրեք, թե ինչ է անում իշխանության կոճակները:"

ընտրեք, թե ինչ են շտկում հոսանքի կոճակները USB չճանաչված վիճակում

4. Այժմ սեղմեք «Փոխեք կարգավորումները, որոնք ներկայումս անհասանելի են:"

փոխել պարամետրերը, որոնք ներկայումս անհասանելի են

5.Uncheck “Միացրեք արագ գործարկման» և սեղմեք Պահպանել փոփոխությունները:

Անջատեք «Միացնել արագ գործարկումը»:

Մեթոդ 2. Գործարկել ավտոմատ վերանորոգում

1.Տեղադրեք Windows 10 bootable տեղադրման DVD-ն եւ վերագործարկել ձեր համակարգչին:

2.When prompted to Սեղմեք ցանկացած ստեղն CD-ից կամ DVD-ից բեռնելու համար սեղմեք ցանկացած ստեղն՝ շարունակելու համար:

Սեղմեք ցանկացած ստեղնաշար ՝ սկավառակի կամ DVD- ի համար

3. Ընտրեք ձեր լեզվի նախապատվությունները և սեղմեք Հաջորդը: Սեղմեք Վերանորոգում ձեր համակարգիչը ներքևի ձախ մասում:

Վերանորոգեք ձեր համակարգիչը

4. Ընտրեք ընտրանքի էկրանին, սեղմեք Troubleshoot.

Ընտրեք տարբերակ Windows 10-ի ավտոմատ գործարկման վերանորոգման ժամանակ

5. Troubleshoot էկրանին սեղմեք Ընդլայնված տարբերակ.

անսարքությունների վերացման էկրանից ընտրեք առաջադեմ տարբերակ

6. Ընդլայնված ընտրանքների էկրանին սեղմեք Ավտոմատ վերանորոգում կամ գործարկման վերանորոգում.

գործարկել ավտոմատ վերանորոգում

7. Սպասեք մինչև Windows-ի ավտոմատ/գործարկման վերանորոգում ամբողջական

8. Վերագործարկեք, և դուք հաջողությամբ անցաք Fix Computer does not start until restarted multiple times issue, եթե ոչ, շարունակիր:

Նաև կարդացեք Ինչպես ուղղել Ավտոմատ վերանորոգումը չի կարող վերանորոգել ձեր համակարգիչը:

Մեթոդ 3. Վերականգնել BIOS-ը լռելյայն կարգավորումներին

1. Անջատեք ձեր նոութբուքը, ապա միացրեք այն և միաժամանակ սեղմեք F2, DEL կամ F12 (կախված ձեր արտադրողից) մտնել BIOS-ի կարգավորում:

սեղմեք DEL կամ F2 ստեղնը՝ BIOS Setup մուտք գործելու համար

2. Այժմ դուք պետք է գտնեք վերակայման տարբերակը բեռնել լռելյայն կոնֆիգուրացիան և այն կարող է անվանվել որպես «Վերականգնել լռելյայնին», «Բեռնել գործարանային կարգավորումները», «Մաքրել BIOS-ի կարգավորումները», «Բեռնել կարգավորումների կանխադրվածները» կամ նման այլ բան:

բեռնել լռելյայն կոնֆիգուրացիան BIOS-ում

3. Ընտրեք այն ձեր սլաքների ստեղներով, սեղմեք Enter և հաստատեք գործողությունը: Ձեր BIOS այժմ կօգտագործի այն լռելյայն կարգավորումներ:

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Ստուգեք, արդյոք համակարգչի կոշտ սկավառակը պատշաճ կերպով միացված է

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Մեթոդ 5. Ստուգեք էլեկտրամատակարարումը

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Սնուցման անսարքություն

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Մեթոդ 7. ATX վերականգնում

Նշում: Այս գործընթացը հիմնականում վերաբերում է նոութբուքերին, այնպես որ, եթե համակարգիչ ունեք, թողեք այս մեթոդը:

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Հիմա հանեք մարտկոցը հետևից և սեղմեք և պահեք միացման կոճակը 15-20 վայրկյան:

անջատեք ձեր մարտկոցը

Նշում: Դեռևս մի միացրեք հոսանքի լարը, մենք ձեզ կասենք, թե երբ դա անեք:

3.Now plug in ձեր հոսանքի լարը (մարտկոցը չպետք է տեղադրվի) և փորձեք բեռնել ձեր նոութբուքը:

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Խորհուրդ է տրվում:

Դա այն է, ինչ դուք հաջողությամբ ունեք Fix Computer does not start until restarted multiple times issue բայց եթե դուք դեռ ունեք հարցեր այս ուղեցույցի վերաբերյալ, ապա ազատ զգալ հարցրեք նրանց մեկնաբանությունների բաժնում: