When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Հնացած օպերացիոն համակարգ.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Միացված չէ, սեղմեք վրա Network globe icon, choose your Wi-Fi network and click on միացնել button. Make sure Ինքնաթիռի ռեժիմ միացված չէ:
3. If you again face the same network connection error code, then click on the անջատել button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Աջ կտտոցով կտտացրեք այն Wi-Fi պատկերակը եւ ընտրել Open Network & Internet settings.
6. Սեղմիր Wi-Fi.
7. Scroll down the right menu, click on Կառավարեք հայտնի ցանցեր.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Մոռացեք
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Մեթոդ 2. Վերագործարկեք երթուղիչը
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Նշում: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1: Գտնել Power կոճակը at the back of your router.
2. Press the button once to Անջատիր դա.
3. Հիմա, անջատել Ձեր Router power cable և սպասեք, մինչև հոսանքն ամբողջությամբ սպառվի կոնդենսատորներից:
4. Հետո, վերամիավորել որ Power Cable և միացրեք այն մեկ րոպե անց:
5. Wait until the network connection is re-established and try signing in again.
Նաեւ Կարդալ: Ուղղեք Windows 10-ում ցանցում չցուցադրվող համակարգիչները
Մեթոդ 3. Գործարկել ցանցի խնդիրների լուծումը
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Հարվածեք Windows բանալին եւ տեսակը Անսարքությունների կարգավորումները որոնման տողում և Բացել.
2. Սեղմիր Լրացուցիչ troubleshooters.
3. Ընտրեք Ցանցային ադապտեր եւ սեղմեք Run the troubleshooter.
4. Select the network adapter to diagnose եւ սեղմեք հաջորդ.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, սեղմեք Փակեք անսարքիչը.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Նաեւ Կարդալ: Ուղղեք YouTube TV-ի չաշխատող ընտանեկան համօգտագործումը
Մեթոդ 4. Վերականգնել համակարգի ֆայլերը
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Համակարգի ֆայլերի ստուգիչ) /DISM (Տեղակայման պատկերների սպասարկում եւ կառավարում) utilities on your Windows 10 PC.
1. Հարվածեք Windows բանալին, տիպ Հրահանգ արագ եւ սեղմեք Run որպես ադմինիստրատոր.
2. Սեղմիր այո է Օգտագործողների հաշիվների կառավարում արագությամբ:
3. Տիպ chkdsk C: / f / r / x հրամայել և հարվածել Մուտքի բանալի.
4. Եթե ձեզ հուշում են հաղորդագրություն, Chkdsk-ը չի կարող գործարկվել… ծավալը… օգտագործման գործընթացում է, ապա, տիպ Y եւ հարվածեց Մուտքի բանալի.
5. Կրկին մուտքագրեք հրամանը. sfc / scannow եւ սեղմեք Մուտքի բանալի գործելու համար Համակարգի ֆայլերի ստուգիչ սկանավորում.
Նշում: Համակարգի սկանավորումը կսկսվի, և ավարտելու համար կպահանջվի մի քանի րոպե: Միևնույն ժամանակ, դուք կարող եք շարունակել այլ գործողություններ կատարել, բայց զգույշ եղեք, որ պատուհանը պատահաբար չփակեք:
Սկանավորումն ավարտելուց հետո այն ցույց կտա հետևյալ հաղորդագրություններից որևէ մեկը.
- Windows Resource Protection-ը չի հայտնաբերել ամբողջականության խախտում:
- Windows ռեսուրսների պաշտպանությունը չկարողացավ կատարել պահանջվող գործողությունը:
- Windows Resource Protection-ը հայտնաբերել է կոռումպացված ֆայլեր և հաջողությամբ վերանորոգել դրանք:
- Windows Resource Protection-ը հայտնաբերել է կոռումպացված ֆայլեր, սակայն չկարողացավ ուղղել դրանցից մի քանիսը:
6. Սկանավորումն ավարտվելուց հետո, մեքենայական ծրագրի կրկնական գործարկումը ձեր ԱՀ.
7. Կրկին մեկնարկ Հրամանների արագացում `որպես ադմինիստրատոր և մեկը մյուսի հետևից կատարեք տրված հրամանները.
dism.exe /Առցանց /cleanup-image /scanhealth dism.exe /Առցանց /cleanup-image /restorehealth dism.exe /Առցանց /cleanup-image /startcomponentcleanup
Նշում: DISM հրամանները պատշաճ կերպով կատարելու համար դուք պետք է ունենաք գործող ինտերնետ կապ:
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Մեթոդ 5. Նորից միացնել ցանցային ադապտերը
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Հարվածեք Windows բանալին եւ տեսակը Device Manager in the Windows search menu. Click on բաց.
2. Ընդլայնել Ցանցային ադապտերներ բաժինը՝ կրկնակի սեղմելով դրա վրա:
3. Աջ սեղմեք ձեր վրա Ցանցի վարորդ (օրինակ, Intel (R) Dual Band Wireless-AC 3168) եւ ընտրեք Անջատել սարքը տարբերակ.
4. Confirm the below prompt by clicking on այո.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Միացնել սարքը տարբերակ.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Նաեւ Կարդալ: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type CMD. Սեղմիր Run որպես ադմինիստրատոր.
2. Մուտքագրեք հետևյալը հրամաններ եւ հարվածեց Մուտքի բանալի.
netsh winsock վերականգնում netsh int ip վերականգնել ipconfig / ազատ արձակել ipconfig / թարմացնել
3. Սպասեք հրամանների կատարմանը և վերաբեռնեք ձեր համակարգիչը.
Մեթոդ 7. մաքրել DNS քեշը
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Գործարկել Հրահանգ արագ by searching in the Windows մենյու and click on Run as administrator.
2. Տիպ ipconfig / flushdns in the command window and hit Մտնել.
Նաեւ Կարդալ: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Գործարկել Վազում երկխոսության տուփը սեղմելով Windows + R ստեղներ միասին.
2. Տիպ ncpa.cpl եւ հարվածեց Մուտքի բանալի.
3. Right-click on your active ցանցային ադապտեր եւ սեղմեք Հատկություններ.
4. Ապանշել Ինտերնետային պրոտոկոլի 6-րդ տարբերակ (TCP / IPv6) տարբերակ.
5. Վերջապես սեղմեք OK to save the changes and check if the issue is resolved.
Նշում: If you use multiple network connections, navigate to Ցանց եւ փոխանակման կենտրոն և Փոխեք ադապտորը settings. Right-click on the adapter and select Խեղել. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Տիպ Device Manager in the Windows search menu and click բաց.
2. Կրկնակի սեղմեք վրա Ցանցային ադապտերներ ընդլայնել այն:
3. Աջ սեղմեք ձեր վրա վարորդ (օրինակ Intel (R) Dual Band Wireless-AC 3168) և կտտացրեք Թարմացրեք վարորդին.
4. Սեղմիր Bննեք իմ համակարգիչը վարորդների համար to locate and install a driver manually.
5. Սեղմեք Browser button to choose any directory and click on հաջորդ.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Ձեր սարքի լավագույն դրայվերներն արդեն տեղադրված են.
6. Սեղմիր փակել դուրս գալ պատուհանից:
7. Վերսկսել the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Գործարկել Device Manager from the Windows search menu.
2. Աջ կտտոցով կտտացրեք այն վարորդ եւ ընտրել Հեռացնել սարքը.
3. A warning prompt will be displayed on the screen. Check the box “Ջնջեք վարորդի ծրագրակազմը այս սարքի համար” and confirm the prompt by clicking Տեղահանել.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Այցելեք արտադրողի կայքը.
2. Գտնել և Բեռնել ձեր համակարգչի Windows-ի տարբերակին համապատասխան դրայվերները:
3. Once downloaded, double click on the ներբեռնված ֆայլ and follow the given instructions to install it.
Նաեւ Կարդալ: How to set up a VPN on Windows 10
Մեթոդ 10. Թարմացրեք Windows-ը
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Սեղմեք Windows + I- ը ստեղները միասին բացել Կարգավորումներ Ձեր համակարգչում:
2. Ընտրեք Թարմացում և անվտանգություն.
3. Ընտրեք Ստուգել թարմացումները.
4A. Click Տեղադրել Հիմա ներբեռնելու և տեղադրելու հասանելի վերջին թարմացումը:
4Բ. Եթե ձեր համակարգն արդեն արդիական է, ապա այն կցուցադրվի Դուք արդի եք հաղորդագրություն:
Մեթոդ 11. Տեղահանել վերջին թարմացումները
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Սեղմեք և պահեք Windows + R ստեղներ միասին բացելու համար Վազում երկխոսության վանդակում:
2. Տիպ appwiz.cpl եւ հարվածեց Մտնել.
3. Սեղմիր Դիտեք տեղադրված թարմացումներ.
4. Select the most recent update and click on Տեղահանել.
5. Confirm the prompt, if any, and վերագործարկեք համակարգիչը.
Նաեւ Կարդալ: Ինչպես շտկել Firefox-ի չբեռնվող էջերը
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the ցանցային ադապտերներ installed in your PC along with their settings. All the stored settings are stored to default settings.
Նշում: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Կարգավորումներ ապա համակարգ և Մեր Մասին. Once you have reset your network, you have to reinstall all networking software նման VPN հաճախորդներ or Վիրտուալ անջատիչներ.
1. Սեղմեք և պահեք Windows + I ստեղներ միասին բացել Windows- ի կարգավորումները.
2. Սեղմիր Networkանց և ինտերնետ.
3. Սեղմիր Ցանցի վերակայումը տակ Ստատուս.
4. Հաստատեք հուշումը սեղմելով վրա Վերակայեք հիմա.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Խորհուրդ է տրվում:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.