Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Վերագործարկեք և ընտրեք պատշաճ բեռնման սարքի խնդիրը [ԼՈՒԾՎԱԾ]
Method 1: Set Correct Boot Order
Դուք կարող եք տեսնել սխալը»Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Երբ ձեր համակարգիչը միանում է (նախքան բեռնման էկրանը կամ սխալի էկրանը), մի քանի անգամ սեղմեք Delete կամ F1 կամ F2 ստեղնը (կախված ձեր համակարգչի արտադրողից)՝ մուտքագրեք BIOS-ի կարգավորում.
2. BIOS-ի կարգավորումից հետո ընտրեք «Boot» ներդիրը ընտրանքների ցանկից:
3.Այժմ համոզվեք, որ համակարգիչը Կոշտ սկավառակ կամ SSD Սահմանված է որպես առաջնահերթություն Boot կարգում: Եթե ոչ, ապա օգտագործեք վեր կամ վար սլաքների ստեղները՝ կոշտ սկավառակը վերևում տեղադրելու համար, ինչը նշանակում է, որ համակարգիչը սկզբում կբեռնվի դրանից, այլ ոչ թե որևէ այլ աղբյուրից:
4. Վերջապես, սեղմեք F10 այս փոփոխությունը պահպանելու և դուրս գալու համար: Սա պետք է ունենա Fix Reboot and Select Proper Boot Device Issue, եթե ոչ, ապա շարունակեք։
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Diagnostics-ը վերագործարկելու համար ձեր համակարգիչը վերագործարկելու համար և երբ համակարգիչը գործարկվում է (մինչև բեռնման էկրանը), սեղմեք F12 ստեղնը և երբ հայտնվի Boot ընտրացանկը, ընդգծեք Boot to Utility Partition կամ Diagnostics տարբերակը և սեղմեք enter՝ ախտորոշումը սկսելու համար: Սա ինքնաբերաբար կստուգի ձեր համակարգի ամբողջ ապարատը և կտեղեկացնի, եթե որևէ խնդիր հայտնաբերվի:
Խորհուրդ է տրվում: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Կարեւոր է. It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Տեղադրեք Windows 10 bootable տեղադրման DVD-ն և վերագործարկեք ձեր համակարգիչը:
2. Երբ Ձեզ հուշում է սեղմել ցանկացած ստեղն՝ CD-ից կամ DVD-ից բեռնելու համար, սեղմեք ցանկացած ստեղն՝ շարունակելու համար:
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Վերագործարկեք, և դուք հաջողությամբ անցաք Fix Reboot and Select Proper Boot Device issue, if not, continue.
Կարդացեք նաև, թե ինչպես շտկել, որ ավտոմատ վերանորոգումը չի կարող վերանորոգել ձեր համակարգիչը:
Method 5: Enable UEFI Boot
1.Վերագործարկեք ձեր համակարգիչը և հպեք F2 կամ DEL՝ կախված ձեր համակարգչից՝ Boot Setup-ը բացելու համար:
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Նշում: Միշտ նշեք System Reserved Partition (ընդհանուր առմամբ 100mb) ակտիվ, իսկ եթե չունեք System Reserved Partition, ապա նշեք C: Drive որպես ակտիվ բաժին:
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Մեթոդ 7. Վերականգնել Տեղադրեք Windows 10-ը
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
Դա այն է, ինչ դուք հաջողությամբ ունեք ուղղել Reboot and Select proper Boot device issue բայց եթե դեռ հարցեր ունեք այս գրառման հետ կապված, ազատ զգալ հարցրեք նրանց մեկնաբանությունների բաժնում: