Fix Driver Power State Failure in Windows 10: Driver Power State Failure Error (0x0000009F) mostly occur due to outdated or incompatible drivers for the hardware devices of your PC. Kegagalan Status Daya Pengemudi is an error which is displayed on Blue Screen of Death(BSOD), which doesn’t mean that your computer can’t be repaired, it just means that the PC has encountered something that it didn’t know what to do.
And the biggest problem you encounter is that you can’t log on to the Windows, because every time you restart your PC you will be shown Driver Power State Failure Error ( DRIVER_POWER_STATE_FAILURE Error ), hence you are stuck in an endless loop. However, this error is totally fixable if you will follow this article as shown below.
CATATAN: Most of the users who encounter this issue have put their computer to sleep and when they try to wake up their PC they encounter this error.
The most common driver which cause this error are antivirus software’s, so try to disable them and try to reboot your Windows. Always update your BIOS!
Perbaiki Kegagalan Status Daya Driver di Windows 10
Before going any further let’s discuss how to Enable Legacy Advanced Boot Menu so that you can easily get into Safe Mode:
1. Restart your Windows 10.
2.As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3.Masukkan DVD instalasi bootable Windows 10 dan restart PC Anda.
4.Ketika diminta untuk Tekan sembarang tombol untuk boot dari CD atau DVD, tekan sembarang tombol untuk melanjutkan.
5.Pilih milik Anda preferensi bahasa, dan klik Berikutnya. Klik Perbaiki komputer Anda di kiri bawah.
6.Pada layar pilih opsi, klik memecahkan.
7.Pada layar Troubleshoot, klik Opsi lanjutan.
8.On Advanced options screen, click command Prompt.
9.When the Command Prompt(CMD) open type C: dan tekan enter.
10.Now type the following command:
BCDEDIT / SETEL {DEFAULT} BOOTMENUPOLICY LEGACY
11.And hit enter to Enable Legacy Advanced Boot Menu.
12.Close Command Prompt and back on the Choose an option screen, click continue to restart Windows 10.
13.Finally, don’t forget to eject your Windows 10 installation DVD, in order to boot into Safe Mode.
Method 1: Uninstall Problematic Driver
1. As the computer restarts, press F8 to display the Advanced Boot Options dan pilih Mode aman.
2.Hit Enter to start Windows 10 in Safe Mode.
3.Press Windows Key + R and type “devmgmt.msc” then hit enter to open Device Manager.
4.Now inside Device Manager, you must see the problematic device driver (it has a yellow mark next to it).
Also, see Fix This device cannot start (Code 10)
5.Once the problematic device driver is identified, right click and select Uninstall.
6.When asked for confirmation, click Ok.
7.Once the driver is uninstalled restart Windows 10 normally.
Method 2: Check Windows Minidump file
1.Let’s first make sure that minidumps are enabled.
2.Press Windows Key + R and type “sysdm.cpl” then press enter.
3.Go to advanced tab and click on the Settings button in Startup and Recovery.
4.Ensure that Mulai ulang secara otomatis under System failure is unchecked.
5.Under the Write Debugging Information header, select Small memory dump (256 kB) in the drop-down box.
6. Pastikan bahwa Small Dump Directory terdaftar sebagai %systemroot%Minidump.
7.Click OK and restart your PC to apply the changes.
8.Now install this program called Siapa yang Hancur.
9.Jalankan Siapa yang Hancur and click on Analyze.
10..Scroll down to view the report and check for the problematic driver.
11.Finally, update the driver and Reboot to apply your changes.
12.Now Press Tombol Windows + R dan ketik “msinfo32” lalu tekan enter.
13. dalam System Summary make sure all your drivers are up to date.
14.Pastikan Anda BIOS is also updated, else update it.
15.Pilih Lingkungan Software dan kemudian klik Running Tasks.
16.Again make sure the drivers have updated i.e. no drivers have file dated back to 2 years.
17.Reboot your PC and this would Perbaiki Kegagalan Status Daya Driver di Windows 10 but if not then continue.
Method 3: Run System File Check (SFC)
1.In the safe mode, Right click on Start and select Command Prompt(Admin) to open cmd.
2.Ketik perintah berikut di cmd: / memindai sekarang
3.Let system file check run, usually, it takes 5 to 15 minutes.
Catatan: Sometimes you have to run SFC command 3-4 times to fix the problem.
4.After the process is finished and you receive the following message:
Perlindungan Sumber Daya Windows menemukan file yang rusak dan berhasil memperbaikinya. Rincian termasuk dalam CBS.Log %WinDir%LogsCBSCBS.log.
5.Simply restart your PC and see if the problem is resolved or not.
6.If you receive the following message:
Perlindungan Sumber Daya Windows menemukan file yang rusak tetapi tidak dapat memperbaiki beberapa di antaranya. Rincian termasuk dalam CBS.Log %WinDir%LogsCBSCBS.log.
7.Then you have to manually repair corrupted files, to do this first view details of the SFC process.
8.At the command prompt, type the following command, and then press ENTER:
findstr /c:"[SR]" %windir%LogsCBSCBS.log >"%userprofile%Desktopsfcdetails.txt"
9.Buka Sfcdetails.txt file from your desktop.
10.The Sfcdetails.txt file uses the following format: Date/Time SFC detail
11.The following sample log file contains an entry for a file that could not be repaired:
2014-02-17 02:40:22, CSI 000001aa [SR] Cannot repair member file [l:22{11}]"autochk.exe" of Microsoft-Windows-Autochk, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
12.Now type the following command in the cmd:
DISM.exe /Online /Cleanup-image /Scanhealth && DISM.exe /Online /Cleanup-image /Restorehealth
This will run DSIM(Deployment Image Servicing and Management) restore commands and will fix SFC errors.
13.After running DISM it is a good idea to re-run SFC /scannow to make sure all the issues were fixed.
14.If for some reason DISM command is not working try this SFCFix Tool.
15.Restart PC Anda dan lihat apakah Anda bisa Fix Driver Power State Failure in Windows 10.
Method 4: Restore you PC to earlier time
1.Tekan Tombol Windows + R dan ketik”sysdm.cpl” lalu tekan enter.
2.Pilih Protection system tab dan pilih Pemulihan Sistem.
3.Klik Berikutnya dan pilih yang diinginkan Titik Pemulihan Sistem.
4.Follow on screen instruction to complete system restore.
5.After reboot, you must have fixed the Driver Power State Failure.
Direkomendasikan untukmu:
Itu saja Anda telah berhasil Perbaiki Kegagalan Status Daya Driver di Windows 10 if you still have any question regarding this post feel free to ask them in comments.