When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Ngosipụta ọkwọ ụgbọ ala kwụsịrị ịzaghachi wee nwetaghachi njehie [SOLVED]
Jide n'aka na ịmepụta ebe weghachi naanị ma ọ bụrụ na ihe adịghị mma.
Method 1: Uninstall Graphic Card Driver
1. Right-click on your NVIDIA graphic card under device manager and select Wepụ.
2. If asked for confirmation, select Yes.
3. Pịa Windows Key + X wee họrọ Ogwe njikwa.
4. From Control Panel, click on Wepu mmemme.
5. Osote, uninstall everything related to Nvidia.
6. Reboot your system to save changes and again download the setup site na webụsaịtị onye nrụpụta.
5. Once you are sure that you have removed everything, try installing the drivers again. The setup should work without any problems.
Method 2: Update Graphic Card Drivers
1. Pịa Windows Key + R wee pịnye devmgmt.msc wee pịa tinye ka imepe njikwa ngwaọrụ.
2. Ọzọ, gbasaa Ihe nkwụnye ihe ngosi and right-click on your Nvidia Graphic Card and select Kwado.
3. Once, you have done this again, right-click on your graphic card and select “Melite ọkwọ ụgbọala Software."
4. Họrọ “Chọọ na akpaghị aka maka akụrụngwa akụrụngwa” and let it finish the process.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Nwelite ngwa ọkwọ ụgbọala” but this time on the next screen select “Chọgharịa kọmputa m maka ngwa ọkwọ ụgbọala."
7. Now. select "Ka m si na listi ndị ọkwọ ụgbọala na kọmputa m. "
8. Finally, select the compatible driver from your Nvidia Graphic Card list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Njirimara.
2. Then click Ntọala sistemụ dị elu site na menu aka ekpe.
Cheta na: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl ma kụọ Tinye.
3. Gbanwee gaa Di elu taabụ if not already there and click Settings under Ọrụ.
4. Now select the checkbox which says “Dezie maka ịrụ ọrụ kacha mma."
5. Pịa Tinye, sochiri ya Ọ DỊ MMA.
6. Malitegharịa ekwentị gị PC iji chekwaa mgbanwe.
Method 4: Increase GPU processing time (Registry Fix)
1. Pịa Windows Key + R wee pịnye regedit wee kụọ Tinye ka imepe ndekọ Editor.
2. Gaa na igodo ndekọ aha:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click New and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
For 32-bit Windows:
a. Họrọ DWORD (32-bit) Bara uru na ụdị TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
For 64-bit Windows:
a. Họrọ QWORD (64-bit) Value na ụdị TdrDelay as the Name.
b. Double click on TdrDelay and tinye 8 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from Microsoft’s official website.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
-atụ aro:
Nke ahụ bụ nke ị nwetara nke ọma Fix Display driver stopped responding and has recovered error [SOLVED] ma ọ bụrụ na ị ka nwere ajụjụ ọ bụla gbasara post a, nweere onwe gị ịjụ ha na ngalaba nkọwa.