When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistemu eji arụ ọrụ emechiela.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe akara ngosi.
2. If the status is set to Enweghị njikọ, pịa na Network globe icon, choose your Wi-Fi network and click on jikọọ button. Make sure Usoro ụgbọ elu agbanyeghị.
3. If you again face the same network connection error code, then click on the Kwupu button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Pịa aka nri na Ihe ngosi Wi-Fi ma họrọ Open Network & Internet settings.
6. Pịa na Wi-Fi.
7. Scroll down the right menu, click on Jikwaa netwọk mara.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Chefuo.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Usoro 2: Malitegharịa ekwentị
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Cheta na: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Chọta Mgbaị ọkụ at the back of your router.
2. Press the button once to gbanyụọ ya.
3. Ugbu a, kwupu gị Router power cable ma chere ruo mgbe ike ga-apụ kpamkpam na capacitors.
4. Mgbe ahụ, kwekọrịta na eriri ọkụ ma gbanye ya mgbe otu nkeji gachara.
5. Wait until the network connection is re-established and try signing in again.
Gụọ kwa: Fix Computers Not Showing Up on Network in Windows 10
Usoro 3: Na-agba ọsọ Network Troubleshooter
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Kpọọ Igodo Windows na ụdị Ntọala nchọpụta nsogbu na ogwe ọchụchọ na Meghee.
2. Pịa na Mgbakwunye nsogbu ndị ọzọ.
3. Họrọ Ihe ngbakwunye network na pịa Gbaa nsogbu ahụ.
4. Select the network adapter to diagnose na pịa Osote.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, pịa na Mechie onye na-eweta nsogbu.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Gụọ kwa: Fix Family Sharing YouTube TV Not Working
Usoro 4: Mmezi faịlụ Sistemu
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Ọchịchị Njikwa System) /DISM (Idebe foto na nchịkwa) utilities on your Windows 10 PC.
1. Kpọọ Igodo Windows, ụdị Iwu kwalite na pịa Na-agba ọsọ dị ka onye nlekọta.
2. Pịa na Ee na Njikwa akaụntụ njikwa ngwa ngwa.
3. Ụdị chkdsk C: / f / r / x iwu na kụọ Tinye isi.
4. Ọ bụrụ na a kpaliri gị na ozi. Chkdsk enweghị ike ịgba ọsọ…olu bụ… na-arụ ọrụ, mgbe ahụ, pịnye Y na see Tinye isi.
5. Ọzọ, pịnye iwu: sfc / scannow na pịa Tinye isi na-agba ọsọ Ọchịchị Njikwa System i scanomi.
Cheta na: A ga-amalite nyocha sistemụ ma ọ ga-ewe nkeji ole na ole iji mechaa. Ka ọ dị ugbu a, ị nwere ike ịga n'ihu na-eme ihe omume ndị ọzọ mana kpachara anya ka ị ghara imechi windo na mberede.
Mgbe emechara nyocha ahụ, ọ ga-egosi otu n'ime ozi ndị a:
- Nchedo akụrụngwa Windows ahụghị mmebi iwu ọ bụla.
- Nchekwa akụrụngwa Windows enweghị ike ịrụ ọrụ achọrọ.
- Windows Resource Nchedo hụrụ faịlụ ndị rụrụ arụ ma rụzie ha nke ọma.
- Windows Resource Nchedo hụrụ faịlụ ndị rụrụ arụ mana enweghị ike idozi ụfọdụ n'ime ha.
6. Ozugbo nyochachara, Malitegharịa ekwentị PC gị.
7. Ọzọ, malite Debe iwu dị ka onye nchịkwa ma debe iwu ndị enyere n'otu n'otu:
dism.exe / online / Cleanup-image / scanhealth dism.exe / Online / Cleanup-image /restorehealth dism.exe / online / Cleanup-image /startcomponentcleanup
Cheta na: Ị ga-enwerịrị njikọ ịntanetị na-arụ ọrụ iji mezuo iwu DISM nke ọma.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Kpọọ Igodo Windows na ụdị Ihe Njikwa Ngwaọrụ in the Windows search menu. Click on Open.
2. gbasaa Nkwụnye netwọk ngalaba site na ịpị ya ugboro abụọ.
3. Pịa aka nri na gị Onye ọkwọ ụgbọ ala netwọkụ (ọmụmaatụ, Intel (R) Dual Band Wireless-AC 3168) wee họrọ Gbanyụọ ngwaọrụ nhọrọ.
4. Confirm the below prompt by clicking on Ee.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Kwado ngwaọrụ nhọrọ.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Gụọ kwa: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Gaa na nchịkọta nhọrọ wee pịnye cmd. Pịa na Na-agba ọsọ dị ka onye nlekọta.
2. Pịnye ihe ndị a iwu na see Tinye isi.
netsh winsock nrụpụta nrụpụta netsh int ip ipconfig / ntọhapụ ipconfig / megharia
3. Chere ka emee iwu na reboot PC gị.
Usoro 7: Wepu cache DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Mwepụta Iwu kwalite by searching in the Windows menu and click on Run as administrator.
2. Ụdị ipconfig / flushdns in the command window and hit Tinye.
Gụọ kwa: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Mwepụta nke Run igbe okwu site na ịpị Igodo Windows + R ọnụ.
2. Ụdị ncpa.cpl ma tie Tinye isi.
3. Right-click on your active netwọk nkwụnye na pịa Properties.
4. Wepụ ihe ahụ Usoro ntanetị nke Intanet 6 (TCP / IPv6) nhọrọ.
5. N'ikpeazụ, pịa OK to save the changes and check if the issue is resolved.
Cheta na: If you use multiple network connections, navigate to Network na Sharing Center na Gbanwee nkwụnye settings. Right-click on the adapter and select gbanyụọ. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Ụdị Ihe Njikwa Ngwaọrụ in the Windows search menu and click Open.
2. Pịa ugboro abụọ na Nkwụnye netwọk ịgbasa ya.
3. Pịa aka nri na gị ọkwọ (dika Intel (R) Dual Band Wireless-AC 3168) ma pịa Na-akwanye ọkwọ ụgbọala.
4. Pịa na Chọgharịa kọmputa m maka ndị ọkwọ ụgbọala to locate and install a driver manually.
5. Pịa na nchọgharị button to choose any directory and click on Osote.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Awụnyelarị ndị ọkwọ ụgbọala kacha mma maka ngwaọrụ gị.
6. Pịa na nso ịpụ na windo.
7. Malitegharịa ekwentị the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Mwepụta Ihe Njikwa Ngwaọrụ from the Windows search menu.
2. Pịa aka nri na ọkwọ ma họrọ Wepu ngwaọrụ.
3. A warning prompt will be displayed on the screen. Check the box “Hichapụ software ịkwọ ụgbọala maka ngwaọrụ a” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Gaa na emeputa website.
2. chọta na Budata site na ntaneetị ndị ọkwọ ụgbọala kwekọrọ na ụdị Windows dị na PC gị.
3. Once downloaded, double click on the ebudatara faịlụ and follow the given instructions to install it.
Gụọ kwa: How to set up a VPN on Windows 10
Usoro 10: Melite Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Pịa Windows + m igodo ọnụ imeghe Settings na kọmputa gị.
2. Họrọ Mmelite & Nche.
3. Họrọ Lelee maka mmelite.
4A. Click Wụnye ugbu a ka ibudata na wụnye mmelite ọhụrụ dị.
4B. Ọ bụrụ na sistemụ gị adịlarị ọhụrụ, mgbe ahụ ọ ga-egosi Ị na-eme ihe ọhụrụ ozi.
Usoro 11: Wepu mmelite ọhụrụ
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pịa ma jide Igodo Windows + R ọnụ imeghe Run igbe.
2. Ụdị appwiz.cpl ma tie Tinye.
3. Pịa na Lelee mmelite arụnyere.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and malitegharịa PC.
Gụọ kwa: Otu esi edozi Firefox anaghị ebu ibe
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Cheta na: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Settings mgbe ahụ System na Banyere. Once you have reset your network, you have to reinstall all networking software dị ka Ndị ahịa VPN or Mgba ọkụ mebere.
1. Pịa ma jide Igodo Windows + I ọnụ imeghe Ntọala Windows.
2. Pịa na Ntanetị & Internetntanetị.
3. Pịa na Ntọala netwọk n'okpuru Ọnọdụ.
4. Kwenye ngwa ngwa site na ịpị Tọgharia ugbu a.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
-atụ aro:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0X00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.