Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Endurræstu og veldu viðeigandi vandamál með ræsibúnaði [leyst]
Method 1: Set Correct Boot Order
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Þegar tölvan þín ræsir (fyrir ræsiskjáinn eða villuskjárinn), ýttu endurtekið á Delete eða F1 eða F2 takkann (fer eftir framleiðanda tölvunnar) til að sláðu inn BIOS uppsetningu.
2.Þegar þú ert í BIOS uppsetningu skaltu velja Boot flipann af listanum yfir valkosti.
3.Gakktu úr skugga um að tölvan Harður diskur eða SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, ef ekki þá haltu áfram.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Til að keyra Diagnostics endurræstu tölvuna þína og þegar tölvan byrjar (fyrir ræsiskjáinn), ýttu á F12 takkann og þegar ræsivalmyndin birtist skaltu auðkenna Boot to Utility Partition valkostinn eða Diagnostics valkostinn og ýta á enter til að hefja greiningu. Þetta mun sjálfkrafa athuga allan vélbúnað kerfisins þíns og tilkynna til baka ef einhver vandamál finnast.
Mælt með: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
mikilvægt: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Settu inn Windows 10 ræsanlegu uppsetningar DVD og endurræstu tölvuna þína.
2. Þegar beðið er um að ýta á einhvern takka til að ræsa af geisladiski eða DVD, ýttu á hvaða takka sem er til að halda áfram.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Endurræstu og þú hefur tekist Fix Reboot and Select Proper Boot Device issue, if not, continue.
Lestu einnig Hvernig á að laga sjálfvirka viðgerð gat ekki gert við tölvuna þína.
Aðferð 5: Virkjaðu UEFI ræsingu
1. Endurræstu tölvuna þína og bankaðu á F2 eða DEL eftir tölvunni þinni til að opna Boot Setup.
2.The make the following changes:
Breyttu valkosti ræsilista í UEFI Disable Load Legacy valkostur ROM Virkja örugga ræsingu
3. Næst skaltu smella á F10 til að vista og hætta ræsiuppsetningu.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Athugaðu: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Aðferð 7: Gera við Settu upp Windows 10
Ef ekkert af ofangreindum lausnum virkar fyrir þig þá geturðu verið viss um að HDD þinn sé í lagi en þú gætir séð villuna "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” vegna þess að stýrikerfið eða BCD upplýsingarnar á HDD var einhvern veginn eytt. Jæja, í þessu tilfelli geturðu reynt að gera við uppsetningu á Windows en ef þetta mistekst líka þá er eina lausnin sem er eftir að setja upp nýtt eintak af Windows (Clean Install).
Það er það sem þú hefur með góðum árangri Festa Reboot and Select proper Boot device issue en ef þú hefur enn einhverjar spurningar varðandi þessa færslu skaltu ekki hika við að spyrja þær í athugasemdahlutanum.