When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Attacco di virus o malware.
- Sistema operativo obsoleto.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icona.
2. If the status is set to Non collegata, Fare clic sul Network globe icon, choose your Wi-Fi network and click on Connettiti button. Make sure Modalità aereo non è acceso.
3. If you again face the same network connection error code, then click on the Disconnect button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Fare clic con il tasto destro del mouse su Icona Wi-Fi e seleziona Open Network & Internet settings.
6. Fare clic su Wi-Fi.
7. Scroll down the right menu, click on Gestisci reti conosciute.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Dimenticare.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metodo 2: riavvia il router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Nota: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Trovare il pulsante di alimentazione sul retro del router.
2. Premere una volta il pulsante per spegnilo.
3. Ora, sconnettere il tuo Router power cable e attendere che l'energia venga completamente scaricata dai condensatori.
4. Poi, ricollegare , il Cavo di alimentazione e accenderlo dopo un minuto.
5. Attendere finché la connessione di rete non viene ristabilita e riprova ad accedere.
Leggi anche: Correggi i computer che non vengono visualizzati in rete in Windows 10
Metodo 3: eseguire la risoluzione dei problemi di rete
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Premi il Tasto Windows e tipo Risolvere i problemi relativi alle impostazioni nella barra di ricerca e Apri.
2. Fare clic su Ulteriori strumenti per la risoluzione dei problemi.
3. Selezionare Scheda di rete e cliccare su Esegui lo strumento di risoluzione dei problemi.
4. Select the network adapter to diagnose e cliccare su Avanti.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, clicca su Chiudere la risoluzione dei problemi.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Leggi anche: Risolto il problema con la condivisione familiare di YouTube TV che non funziona
Metodo 4: riparare i file di sistema
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Controllo file di sistema) /DISM (Manutenzione e gestione delle immagini di distribuzione) utilities on your Windows 10 PC.
1. Premi il Tasto Windows, Il tipo di Prompt dei comandi e cliccare su Eseguire come amministratore.
2. Fare clic su Sì nel Controllo account utente richiesta.
3. Tipo chkdsk C: / f / r / x comanda e colpisci Tasto Invio.
4. Se viene richiesto con un messaggio, Chkdsk non può essere eseguito... il volume è... in uso, quindi digitare Y e ha colpito l' Tasto Invio.
5. Ancora una volta, digita il comando: sfc / scannow e premere Tasto Invio per eseguire il Controllo file di sistema scansione.
Nota: Verrà avviata una scansione del sistema e il completamento richiederà un paio di minuti. Nel frattempo puoi continuare a svolgere altre attività, ma fai attenzione a non chiudere accidentalmente la finestra.
Dopo aver completato la scansione, verrà visualizzato uno di questi messaggi:
- Protezione risorse di Windows non ha riscontrato alcuna violazione di integrità.
- Protezione risorse di Windows non può eseguire l'operazione richiesta.
- Protezione delle risorse di Windows ha trovato file corrotti e li ha riparati con successo.
- Protezione risorse di Windows ha trovato file corrotti ma non è stato in grado di risolverne alcuni.
6. Una volta terminata la scansione, nuovo inizio il tuo PC.
7. Ancora una volta, avvia Prompt dei comandi come amministratore ed esegui i comandi indicati uno dopo l'altro:
dism.exe /Online /immagine-pulizia /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Nota: È necessario disporre di una connessione Internet funzionante per eseguire correttamente i comandi DISM.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Premi il Tasto Windows e tipo Gestione periferiche in the Windows search menu. Click on Apri.
2. Espandere il file schede di rete sezione facendo doppio clic su di essa.
3. Fai clic con il pulsante destro del mouse sul tuo Il driver di rete (per esempio, Intel (R) Dual Band Wireless-AC 3168) e seleziona la Disabilita dispositivo opzione.
4. Confirm the below prompt by clicking on Sì.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Abilita dispositivo opzione.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Leggi anche: Correzione Windows non è riuscito a rilevare automaticamente le impostazioni proxy di questa rete
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Vai al menu di ricerca e digita cmd. Fare clic su Eseguire come amministratore.
2. Digitare quanto segue comandi e ha colpito l' Tasto Invio.
reset di winsock di netsh netsh int ip reset ipconfig / release ipconfig / renew
3. Attendere l'esecuzione dei comandi e riavvia il tuo PC.
Metodo 7: svuota la cache DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lanciare Prompt dei comandi by searching in the Windows menu and click on Run as administrator.
2. Tipo ipconfig / flushdns in the command window and hit entrare.
Leggi anche: [SOLVED] Windows detected a hard disk problem
Metodo 8: disabilita IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Avvia il Correre finestra di dialogo premendo Tasti Windows + R. insieme.
2. Tipo ncpa.cpl e colpisci Tasto Invio.
3. Right-click on your active scheda di rete e cliccare su Properties.
4. Deseleziona il Protocollo Internet versione 6 (TCP / IPv6) opzione.
5. Infine, fai clic su OK to save the changes and check if the issue is resolved.
Nota: If you use multiple network connections, navigate to Rete e condivisione ed Cambia adattatore settings. Right-click on the adapter and select Disabilita. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tipo Gestione periferiche in the Windows search menu and click Apri.
2. Fare doppio clic su schede di rete per espanderlo.
3. Fai clic con il pulsante destro del mouse sul tuo autista (per esempio 3168 Wireless-AC dual band Intel (R)) e fare clic Aggiorna driver.
4. Fare clic su Cerca i driver nel mio computer to locate and install a driver manually.
5. Clicca sul Browser button to choose any directory and click on Avanti.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, I migliori driver per il tuo dispositivo sono già installati.
6. Fare clic su Chiudi per uscire dalla finestra.
7. Ricomincia the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lanciare Gestione periferiche from the Windows search menu.
2. Fare clic con il tasto destro del mouse su autista e seleziona Disinstallare il dispositivo.
3. A warning prompt will be displayed on the screen. Check the box “Elimina il software del driver per questo dispositivo” and confirm the prompt by clicking Disinstallare.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Visitare il sito web del produttore.
2. Trovare ed Scaricare i driver corrispondenti alla versione di Windows sul tuo PC.
3. Once downloaded, double click on the file scaricato and follow the given instructions to install it.
Leggi anche: Come configurare una VPN su Windows 10
Metodo 10: aggiorna Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. premi il Windows + I Tasti insieme per aprire Impostazioni profilo sul tuo computer.
2. Selezionare Aggiornamento e sicurezza.
3. Selezionare Controlla aggiornamenti.
4A. Click installare ora to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Sei aggiornato messaggio.
Metodo 11: disinstallare gli aggiornamenti recenti
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. tieni premuto Tasti Windows + R. insieme per aprire il Correre la finestra di dialogo.
2. Tipo appwiz.cpl e colpisci entrare.
3. Fare clic su Visualizza aggiornamenti installati.
4. Select the most recent update and click on Disinstallare.
5. Confirm the prompt, if any, and riavviare il PC.
Leggi anche: Come risolvere il problema con Firefox che non carica le pagine
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the adattatori di rete installed in your PC along with their settings. All the stored settings are stored to default settings.
Nota: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Impostazioni profilo poi Sistema ed Chi siamo. Once you have reset your network, you have to reinstall all software di rete piace Client VPN or Interruttori virtuali.
1. tieni premuto Tasti Windows + I. insieme per aprire Impostazioni di Windows.
2. Fare clic su Rete e Internet.
3. Fare clic su Ripristino rete per Stato dei servizi.
4. Confermare la richiesta facendo clic su Ripristina ora.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Consigliato:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.