When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- מערכת הפעלה מיושנת.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe סמל.
2. If the status is set to לא מחובר, הקלק על ה Network globe icon, choose your Wi-Fi network and click on לְחַבֵּר button. Make sure מצב טיסה אינו מופעל.
3. If you again face the same network connection error code, then click on the נתק button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. לחץ באמצעות לחצן העכבר הימני על ה- סמל Wi-Fi ובחר Open Network & Internet settings.
6. לחץ על Wi-Fi.
7. Scroll down the right menu, click on ניהול רשתות ידועות.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select לשכוח.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
הערה: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. למצוא את ה לחצן הפעלה at the back of your router.
2. Press the button once to תכבה את זה.
3. עכשיו, לנתק שֶׁלְךָ Router power cable והמתן עד שהכוח יתרוקן לחלוטין מהקבלים.
4. ואז, מחדש מה היא כבל חשמל ולהפעיל אותו לאחר דקה.
5. Wait until the network connection is re-established and try signing in again.
גם לקרוא: Fix Computers Not Showing Up on Network in Windows 10
שיטה 3: הפעל את פותר הבעיות ברשת
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. הכה את מקש Windows וסוג פתרון בעיות בהגדרות בסרגל החיפוש ו פתח.
2. לחץ על פותר בעיות נוספות.
3. בחר מתאם רשת ולחץ על הפעל את פותר הבעיות.
4. Select the network adapter to diagnose ולחץ על הַבָּא.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, לחץ על סגור את פותר הבעיות.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
גם לקרוא: תקן שיתוף משפחתי ב-YouTube TV לא עובד
שיטה 4: תיקון קבצי מערכת
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (בודק קבצי מערכת) /DISM (פריסה שירות שירות וניהול) utilities on your Windows 10 PC.
1. הכה את מקש Windowsסוג שורת פקודה ולחץ על הפעל כמנהל.
2. לחץ על יש ב בקרת חשבון משתמש הפקודה.
3. סוּג chkdsk C: / f / r / x פקודה ופגע הזן מקש.
4. אם תתבקש עם הודעה, Chkdsk לא יכול להפעיל... אמצעי האחסון... בתהליך שימוש, לאחר מכן, הקלד Y ופגעתי הזן מקש.
5. שוב, הקלד את הפקודה: sfc / scannow ולחץ הזן מקש להפעיל את בודק קבצי מערכת לִסְרוֹק.
הערה: סריקת מערכת תתחיל ותימשך מספר דקות לסיום. בינתיים, אתה יכול להמשיך לבצע פעילויות אחרות, אך שים לב לא לסגור בטעות את החלון.
לאחר השלמת הסריקה, היא תציג אחת מההודעות הבאות:
- Windows Resource Protection לא מצא הפרות שלמות.
- Windows Resource Protection לא הצליח לבצע את הפעולה המבוקשת.
- Windows Resource Protection מצא קבצים פגומים ותיקן אותם בהצלחה.
- Windows Resource Protection מצא קבצים פגומים, אך לא הצליח לתקן חלק מהם.
6. לאחר סיום הסריקה, הפעלה מחדש המחשב האישי שלך.
7. שוב, הפעל שורת הפקודה כמנהל ובצע את הפקודות הנתונות בזו אחר זו:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
הערה: עליך להיות בעל חיבור אינטרנט תקין כדי לבצע פקודות DISM כראוי.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. הכה את מקש Windows וסוג מנהל התקנים in the Windows search menu. Click on להרחיב.
2. הרחב את ה- מתאמי רשת סעיף על ידי לחיצה כפולה עליו.
3. לחץ לחיצה ימנית על שלך מנהל התקן רשת (לדוגמה, Intel (R) Dual Band Wireless-AC 3168) ובחר את השבת את המכשיר אוֹפְּצִיָה.
4. Confirm the below prompt by clicking on יש.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the הפעל את המכשיר אוֹפְּצִיָה.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
גם לקרוא: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. עבור לתפריט החיפוש והקלד cmd. לחץ על הפעל כמנהל.
2. הקלד את הדברים הבאים פקודות ופגעתי הזן מקש.
netsh winsock לאפס איפוס IP IP - - ipconfig / שחרור ipconfig / לחדש
3. המתן לביצוע הפקודות ו אתחל מחדש את המחשב האישי שלך.
שיטה 7: שטוף מטמון DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. לְהַשִׁיק שורת פקודה by searching in the Windows תפריט and click on Run as administrator.
2. סוּג ipconfig / flushdns in the command window and hit זן.
גם לקרוא: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. הפעל את הפעלה תיבת דו-שיח על ידי לחיצה על מקשי Windows + R יַחַד.
2. סוּג ncpa.cpl ופגע הזן מקש.
3. Right-click on your active מתאם רשת ולחץ על מאפיין.
4. בטל את הסימון של פרוטוקול אינטרנט גרסה 6 (TCP / IPv6) אוֹפְּצִיָה.
5. לבסוף, לחץ על OK to save the changes and check if the issue is resolved.
הערה: If you use multiple network connections, navigate to מרכז הרשת והשיתוף ו החלף מתאם settings. Right-click on the adapter and select שבת. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. סוּג מנהל התקנים in the Windows search menu and click להרחיב.
2. לחץ פעמיים על מתאמי רשת להרחיב אותו.
3. לחץ לחיצה ימנית על שלך נהג (לְמָשָׁל Intel(R) Dual Band Wireless-AC 3168) ולחץ עדכון מנהל ההתקן.
4. לחץ על חפש במחשב שלי אחר מנהלי התקנים to locate and install a driver manually.
5. לחץ על דפדפן button to choose any directory and click on הַבָּא.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, מנהלי ההתקן הטובים ביותר עבור המכשיר שלך כבר מותקנים.
6. לחץ על סְגוֹר לצאת מהחלון.
7. הפעל מחדש the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. לְהַשִׁיק מנהל התקנים from the Windows search menu.
2. לחץ באמצעות לחצן העכבר הימני על ה- נהג ובחר התקן הסרת התקנה.
3. A warning prompt will be displayed on the screen. Check the box “מחיקת תוכנת מנהל ההתקן עבור התקן זה” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. בקר ב- אתר היצרן.
2. ו הורדה the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the קובץ שהורד and follow the given instructions to install it.
גם לקרוא: How to set up a VPN on Windows 10
שיטה 10: עדכן את Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. לחץ על Windows + מפתחות יחד כדי לפתוח הגדרות במחשב שלך.
2. בחר עדכון ואבטחה.
3. בחר בדקו אם יש עדכונים.
4A. Click התקן כעת to download and install the latest update available.
4B. If your system is already up-to-date, then it will show אתה מעודכן הוֹדָעָה.
שיטה 11: הסר את התקנת העדכונים האחרונים
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. לחץ והחזק מקשי Windows + R יחד כדי לפתוח את הפעלה תיבת דיאלוג.
2. סוּג appwiz.cpl ופגע זן.
3. לחץ על צג עדכונים מותקנים.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and הפעל מחדש את המחשב.
גם לקרוא: כיצד לתקן ש-Firefox לא טוען דפים
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the מתאמי רשת installed in your PC along with their settings. All the stored settings are stored to default settings.
הערה: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to הגדרות אז מערכת ו אודות . Once you have reset your network, you have to reinstall all networking software כמו לקוחות VPN or מתגים וירטואליים.
1. לחץ והחזק מקשי Windows + I יחד כדי לפתוח הגדרות של Windows.
2. לחץ על רשת ואינטרנט.
3. לחץ על איפוס רשת תחת מצב.
4. Confirm the prompt by clicking on אפס כעת.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
מומלץ:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.