When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
何か問題が発生した場合に備えて、必ず復元ポイントを作成してください。
方法 1: グラフィック カード ドライバーをアンインストールする
1. デバイス マネージャーで NVIDIA グラフィック カードを右クリックし、 アンインストール。
2. 確認を求められたら、[はい] を選択します。
3. Windows キー + X を押して、 コントロールパネル。
4. コントロール パネルから、 プログラムをアンインストールします。
5。 次、 Nvidia に関連するものをすべてアンインストールします。
6. システムを再起動して変更を保存し、 もう一度セットアップをダウンロードします メーカーのウェブサイトから。
5. すべて削除したことを確認したら、 ドライバーをもう一度インストールしてみてください. セットアップは問題なく動作するはずです。
方法2:グラフィックカードドライバーを更新する
1. Windows キー + R を押して、次のように入力します。 devmgmt.msc and hit enter to open Device Manager.
2. 次に展開します ディスプレイアダプタ and right-click on your Nvidia Graphic Card and select 有効にします。
3. Once, you have done this again, right-click on your graphic card and select “ドライバー ソフトウェアを更新します。
4。 」を選択します更新されたドライバソフトウェアを自動的に検索する” and let it finish the process.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “ドライバソフトウェアの更新」と表示されますが、今度は次の画面で「」を選択します。コンピュータを参照してドライバソフトウェアを探します。
7. Now. select 「私のコンピュータ上のデバイスドライバのリストから選んでみましょうに設立された地域オフィスに加えて、さらにローカルカスタマーサポートを提供できるようになります。」
8. Finally, select the compatible driver from your Nvidia グラフィックカード list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select プロパティ。
2。 次に、をクリックします 高度なシステム設定 左側のメニューから。
注: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cplと Enterキーを押します。
3.に切り替え 詳細設定タブ if not already there and click Settings under パフォーマンス。
4. Now select the checkbox which says “最高のパフォーマンスになるように調整します。
5. 「適用」をクリックし、続いて「適用」をクリックします。 [OK]をクリックします。
6. PC を再起動して変更を保存します。
Method 4: Increase GPU processing time (Registry Fix)
1. Windows キー + R を押して、次のように入力します。 regeditを Enter キーを押してレジストリ エディターを開きます。
2. 次のレジストリ キーに移動します。
HKEY_LOCAL_MACHINESYSTE MCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click 新作 and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
32ビットWindowsの場合:
a。 選択する DWORD(32ビット)値 とタイプ TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
64ビットWindowsの場合:
a。 選択する QWORD (64-bit) Value とタイプ TdrDelay as the Name.
b. Double click on TdrDelay and 8を入力 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from Microsoft’s official website.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
推奨:
これで成功です Fix Display driver stopped responding and has recovered error [SOLVED] ただし、この投稿に関してまだ質問がある場合は、コメントのセクションで遠慮なく質問してください。