Intel Wireless AC 9560 is the most dedicated Wi-Fi adapter of Intel. If this network adapter fails to work on your device, you cannot connect to any network. This issue is often accompanied by an error code of 10 or 45 if you check the properties of this network adapter. If you are also facing Intel Wireless AC 9560 not working issue on your Windows 10 PC, you can easily troubleshoot the same by following the below-listed hacks. So, continue reading to fix Intel Wireless AC 9560 code 10 error.
How to Fix Intel Wireless AC 9560 Not Working
You may wonder why this problem occurs on your Windows 10 PC. Here are some valid reasons that trigger this problem in your device.
- Router configuration is not proper.
- Network connection is very bad.
- The cable connecting the router and the modem is damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between the router and your device.
- Outdated network drivers.
- Other background processes are consuming too many CPU resources from your PC.
- Incompatible proxy/ TCP configuration settings.
- The DNS addresses are not appropriate.
- Few essential Windows services like WLAN Autoconfig are not enabled on your device.
- Corrupt components on PC and presence of malware.
- The Operating system version is not compatible with the latest version of the driver.
Here are a few troubleshooting ideas that will help you fix the issue. Follow them in the same order to attain the best results.
注: Few steps in this guide are demonstrated with some other Wireless adapters. Follow the steps for インテルワイヤレスAC 9560 driver accordingly.
方法 1: 基本的なトラブルシューティング方法
Before going through the advanced troubleshooting methods, follow these basic methods to fix the issue.
1A. PCを再起動する
If there are any temporary glitches in your PC, you will face Intel Wireless AC 9560 code 10. The general trick to resolve all the temporary glitches is to restart your computer. You can restart your PC by following the steps.
1.ヒット Windows + D キー together to go to the デスクトップ.
2. 次に、 Alt + F4キー 同時に。
3.次に、 再起動 option from the drop-down menu and hit 入力します.
1B.適切なネットワーク接続を確認する
Unstable internet connection leads to Intel Wireless AC 9560 not working code 10, also if there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems. You can run a Speedtest 適切な接続に必要なネットワーク速度の最適レベルを知ることができます。
デバイスが以下の基準を満たしていることを確認してください。
- ネットワークの信号強度を確認し、信号強度が非常に低い場合は、途中にある障害物をすべて取り除きます。
- 同じネットワークに接続するデバイスが多すぎることを避けてください。
- 必ずインターネット サービス プロバイダー (ISP) によって検証されたモデム/ルーターを購入してください。競合が発生しません。
- 使用しない 古いケーブル、壊れたケーブル、または破損したケーブル。 必要に応じてケーブルを交換します。
- モデムからルーターまでの配線、およびモデムから壁までの配線が安定しており、障害が発生していないことを確認してください。
また読む: Windows 10でWiFiネットワークが見つからない問題を修正する
1C. Run Network Troubleshooter and Reset TCP/IP
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix Intel Wireless AC 9560 keeps disconnecting problem.
Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using the Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed the discussed error or not.
1D。バックグラウンドプロセスを閉じる
Several users have confirmed that Intel Wireless AC 9560 not working issue can be resolved by closing all the background tasks running on your PC. To implement the task, follow our guide How to End Task in Windows 10 and proceed as instructed.
Once you have closed all the background processes, check if you were able to fix the issue or not.
1E。システムファイルを修復する
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing Intel Wireless AC 9560 code 10 very recently, there are some chances that your computer files have become corrupt or damaged.
幸いなことに、Windows 10 PC には、破損したファイルをすべて修復するのに役立つ SFC (システム ファイル チェッカー) や DISM (展開イメージのサービスと管理) などの修復ツールが組み込まれています。
Windows 10 でシステム ファイルを修復する方法に関するガイドを読み、指示に従ってすべての破損したファイルを修復します。
また読む: Fix Windows 10 Netwtw04.sys Blue Screen Error
1F. Use Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix Intel Wireless AC 9560 not working issue. To do so, follow our guide on How to change DNS settings in Windows 10.
1G. Disable Proxy Server
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face Intel Wireless AC 9560 code 10 issue. If you have installed any VPN service or use proxy servers on your PC, read out How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed the discussed issue. Still, if you face the same problem, try connecting to a モバイルホットスポット。
After implementing the steps, check if you can fix Intel Wireless AC 9560 not working or not.
また読む: Windows 10でネットワーク上にコンピュータが表示されない問題を修正する
1H。ウィンドウを更新する
You can also eradicate Intel Wireless AC 9560 keeps disconnecting on your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update.
After updating your Windows Operating System, check whether you can connect to your network adapter.
1I. Run Malware Scan
Sudden virus or malware attack will result in Intel Wireless AC 9560 not working code 10 issue on your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer.
「コンピュータでウイルス スキャンを実行するにはどうすればよいですか?」ガイドの指示に従ってコンピュータをスキャンすることをお勧めします。
また、コンピューター内のマルウェアを削除する場合は、「Windows 10 で PC からマルウェアを削除する方法」のガイドを確認してください。
Method 2: Enable WiFi from Settings
Intel Wireless AC 9560 code 10 will hide the internet icons from the main menu and you cannot use them as you do regularly. If you cannot see WiFi in the Taskbar, you can enable it from the settings menu as instructed below.
1。 プレス Windows + Iキー 一緒に開く Windowsの設定.
2。 今すぐクリックして ネットワークとインターネット 図のように設定します。
3. Now, in the left pane click on the Wi-Fi タブを押して、 Wi-Fi
また読む: Windows がこのネットワークのプロキシ設定を自動的に検出できなかった問題を修正
Method 3: Regenerate IP Address
Some internet tasks won’t function on public IP addresses due to security concerns, and as a result, they temporarily freeze the account. Follow these steps to reset the IP address and fix Intel Wireless AC 9560 code 10.
1。 プレス ウィンドウズキー とタイプ コマンドプロンプト 検索ボックスに
2.を右クリックします コマンドプロンプト をクリックして 管理者として実行..
3。 クリック 有り to give permission.
4. 次のように入力します。 コマンド one after the other and hit キーを入力してください 各コマンドの後。
Ipconfig / flushdns でipconfig /リリース IPCONFIG / RENEW
5. Execute the following コマンド to fix any wrong network configuration:
netsh int ip reset netsh winsockリセット
6. After entering the commands, PCを再起動します.
Method 4: Re-enable Wi-Fi Cards
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face Intel Wireless AC 9560 keeps disconnecting issue. But there are a few simple instructions to enable WiFi adapters on your computer.
1。 開く ラン を押してダイアログボックス Windows + Rキー 一緒に。
2. Now, type the ファイル名を指定 ヒット キーを入力してください 打ち上げへ ネットワーク接続.
3. Now, right-click on your active ネットワークアダプター 有効か無効かを確認します。
4。 クリック 有効にします if the status is disabled.
注: If the status is already in Enable, move to the next method.
Check if you have fixed Intel Wireless AC 9560 issue or not.
また読む: イーサネットに有効な IP 構成エラーがないを修正
Method 5: Disable & Enable Intel Wireless AC 9560 Adapter
Sometimes, a small temporary glitch in your network adapters can cause Intel Wireless AC 9560 not working code 10 issue. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1.ヒット ウィンドウズキー とタイプ デバイスマネージャ Windows の検索メニューで。クリック Open 示されるように。
2. ここで、 ネットワークアダプタ セクションをダブルクリックして選択します。
3. 次に、上で右クリックします。 インテルワイヤレスAC 9560 driver and select the デバイスを無効にする オプションを選択します。
注: 見せています Qualcomm Atheros QCA9388ワイヤレスネットワークアダプタ 一例として。
4. Then, confirm the below prompt by clicking on 有り.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, right-click on インテルワイヤレスAC 9560 選択 デバイスを有効にする 示されているオプション。
Finally, check if the issue with your driver is fixed or not.
Method 6: Start WLAN AutoConfig Service
A ton of services will run in the background whenever you boot your Windows 10 PC. One among them is the WLAN AutoConfig service which is responsible for WiFi services. If this service is disabled, you may face Intel Wireless AC 9560 keeps disconnecting issue and what you need to do is to restart the service as instructed below.
1。 に行く 検索するにはここに入力してください field in the bottom left corner of the screen and type サービス 示されているように。次に、 をクリックします Open.
2. 次に、次を検索します。 WLANAutoConfigサービス それをダブルクリックします。
注: You can also right-click on WLANAutoConfigサービス 選択 プロパティ ドロップダウンリストからオプションを選択します。
3. ここで、 スタートアップの種類 as オートマチック.
3A.もし サービスの状態 ではありません Running:次に、 開始
3B. If the サービスの状態 is Running:、をクリックしてください Force Stop button for a while and Start it again.
4.最後に、をクリックします 適用> OK を入力して変更を保存してください。
また読む: Windows 10でネットワークファイル共有を設定する方法
方法 7: 省電力モードを無効にする
Sometimes, you may face Intel Wireless AC 9560 not working code 10 issue if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1。 打ち上げ デバイスマネージャ by typing it in the Windows 10 search menu and clicking on Open.
2. ここで、 ネットワークアダプタ のセクションから無料でダウンロードできます。
3. 次に、上で右クリックします。 インテルワイヤレスAC 9560 選択 プロパティ 示されているオプション。
4. 次に、 パワーマネジメント の窓 ネットワーク アダプタのプロパティ window and uncheck the box next to 電源を節約するためにコンピュータがこのデバイスをオフにできるようにする.
5.最後に、をクリックします OK を入力して変更を保存してください。
Method 8: Update Intel Wireless AC 9560 Driver
Device drivers establish a connection link between the hardware and Operating System of your computer. Also, faulty or corrupt drivers lead to Intel Wireless AC 9560 keeps disconnecting issue. Many users have reported that updating all WLAN drivers have helped them fix the issue.
Option I: Update Network Driver
You are advised to update WLAN drivers to improve the reliability of your network adapters, fix compatibility issues, and resolve the discussed issue. Follow our guide on How to Update Network Adapter Drivers on Windows 10 to do so.
Option II: Roll Back Driver Updates
When you roll back your drivers, all the current versions of the hardware device will be uninstalled and previously installed drivers will be installed on your PC. This feature will be very helpful when any new driver update does not work well with your computer. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix the discussed issue.
After your Windows 10 computer has installed the previous version of drivers, check if you have fixed the discussed problem.
Method 9: Reinstall Intel Wireless AC 9560 Driver
Incompatible drivers must be reinstalled to fix Intel Wireless AC 9560 not working code 10. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or manually.
Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 on your Windows 10 computer.
ネットワーク ドライバーを再インストールした後、議論された問題が解決したかどうかを確認してください。
また読む: Windows 0のネットワークエラー00028001x10を修正する
方法10:ネットワーク設定をリセットします。
Several users have declared that, resetting network settings will resolve strange network connection issues. This method will forget all the network configuration settings, saved credentials, and a lot more security software like VPN and antivirus programs.
To do so, follow our guide on How to Reset Network Settings on Windows 10
Method 11: Reset BIOS to Default
There are several customization settings in BIOS of your system in order to improve the system performance. Some activities like overclocking and caching might change any default settings and thus contributing to the said problem. Yet, the easiest way to tackle the problem is to reset the BIOS to default. Here is how to do that.
1. Restart your system and hold F2キー while pressing the Power button.
注: The combinational keys to turn on BIOS settings might vary according to the system model you use. You are advised to make sure which combinational keys work on your PC. Read 6 Ways to Access BIOS in Windows 10 (Dell/Asus/ HP) here.
2。 次の場所に移動します。 Advanced BIOS section 選択して 構成データのリセット.
3。 最後に、 保存して終了 オプションを選択します。
方法12: システムの復元を実行する
If you have recently updated your Windows 10 operating system and later facing Intel Wireless AC 9560 not working code 10, the latest Windows update components may interfere with any software present in your computer and may cause the discussed issue. So, in this case, you must restore your computer to the previous version when it was working fine.
To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network adapter without any problems.
また読む: Windows 10でインターネットが低下し続ける問題を修正
方法 13: PC をリセットする
If none of the methods have helped you fix Intel Wireless AC 9560 code 10, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Last but not the least, you have to seek for technical support if above listed methods fail to resolve Intel Wireless AC 9560 not working. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
推奨:
このガイドがお役に立てば幸いです。 fix Intel Wireless AC 9560 not working issue in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.