When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- ウイルスやマルウェアの攻撃
- 古いオペレーティングシステム。
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe のアイコンをクリックします。
2. If the status is set to 接続されていません、をクリックしてください Network globe icon, choose your Wi-Fi network and click on お問合せ button. Make sure 機内モード オンになっていない。
3. If you again face the same network connection error code, then click on the 切断 button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5.を右クリックします Wi-Fiアイコン をクリックして ネットワークとインターネットの設定を開きます。
6。 クリック Wi-Fi.
7. Scroll down the right menu, click on 既知のネットワークを管理する.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select 忘れる。
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
方法 2: ルーターを再起動する
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
注: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1。 を見つける 電源スイッチ at the back of your router.
2. Press the button once to 消して。
3.さて、 切断 Router power cable コンデンサから電力が完全に排出されるまで待ちます。
4 その後、 再接続します 電力ケーブル そして1分後にスイッチを入れます。
5. Wait until the network connection is re-established and try signing in again.
また読む: Fix Computers Not Showing Up on Network in Windows 10
方法3:ネットワークトラブルシューティングを実行する
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1.ヒット ウィンドウズキー とタイプ 設定のトラブルシューティング 検索バーと を開きます。
2。 クリック 追加のトラブルシューティング.
3。 選択 ネットワークアダプター をクリックします。入力したコードが正しければ、MFAの設定は正常に完了します トラブルシューティングを実行する.
4. Select the network adapter to diagnose をクリックします。入力したコードが正しければ、MFAの設定は正常に完了します Next.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem トラブルシューティングを閉じます.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
また読む: ファミリーシェアリングYouTube TVが機能しない問題を修正
方法 4: システム ファイルを修復する
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (システムファイルチェッカー) /DISM (展開イメージのサービスと管理) utilities on your Windows 10 PC.
1.ヒット ウィンドウズキー、タイプ コマンドプロンプト をクリックします。入力したコードが正しければ、MFAの設定は正常に完了します 管理者として実行..
2。 クリック 有り セクションに ユーザーアカウント制御 プロンプト。
3。 タイプ chkdsk C:/ f / r / x コマンドとヒット キーを入力してください.
4. メッセージが表示された場合は、 Chkdskを実行できません...ボリュームは...使用中です次に、次のように入力します Y とヒット キーを入力してください.
5. 再度、次のコマンドを入力します。 SFC / SCANNOW を押し キーを入力してください を実行する システムファイルチェッカー スキャン。
注: システム スキャンが開始され、完了するまでに数分かかります。その間、他のアクティビティの実行を続けることはできますが、誤ってウィンドウを閉じないように注意してください。
スキャンが完了すると、次のいずれかのメッセージが表示されます。
- Windowsリソース保護は整合性違反を検出しませんでした。
- Windowsリソース保護は要求された操作を実行できませんでした。
- Windows Resource Protectionは破損したファイルを検出し、正常に修復しました。
- Windows Resource Protectionは破損したファイルを検出しましたが、一部を修正できませんでした。
6. スキャンが完了したら、 再起動 あなたのPC.
7. 再度起動します 管理者としてのコマンドプロンプト そして、指定されたコマンドを次々に実行します。
dism.exe / Online / cleanup-image / scanhealth dism.exe / Online / cleanup-image / restorehealth dism.exe / Online / cleanup-image / startcomponentcleanup
注: DISM コマンドを適切に実行するには、インターネット接続が動作している必要があります。
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1.ヒット ウィンドウズキー とタイプ デバイスマネージャ in the Windows search menu. Click on Open.
2.を展開します ネットワークアダプタ セクションをダブルクリックして選択します。
3. を右クリックします。 ネットワークドライバー (例えば、 Intel (R) Dual Band Wireless-AC 3168) 選択 デバイスを無効にする オプションを選択します。
4. Confirm the below prompt by clicking on 有り.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the デバイスを有効にする オプションを選択します。
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
また読む: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type CMD。 をクリックしてください 管理者として実行..
2. 次のように入力します。 コマンド とヒット キーを入力してください.
netsh winsockリセット netsh int ip reset でipconfig /リリース IPCONFIG / RENEW
3. コマンドが実行されるのを待ち、 PCを再起動してください.
方法 7: DNS キャッシュをフラッシュする
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1。 打ち上げ コマンドプロンプト by searching in the Windows メニュー and click on Run as administrator.
2。 タイプ でipconfig / flushdnsと in the command window and hit 入力します.
また読む: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1。 起動する ラン を押してダイアログボックス Windows + Rキー 一緒に。
2。 タイプ ファイル名を指定 ヒット キーを入力してください.
3. Right-click on your active ネットワークアダプター をクリックします。入力したコードが正しければ、MFAの設定は正常に完了します プロパティ.
4.チェックを外します インターネットプロトコルバージョン6(TCP / IPv6) オプションを選択します。
5.最後に、をクリックします OK to save the changes and check if the issue is resolved.
注: If you use multiple network connections, navigate to ネットワークと共有センター & アダプターを変更する settings. Right-click on the adapter and select 無効にします. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1。 タイプ デバイスマネージャ in the Windows search menu and click Open.
2.をダブルクリックします ネットワークアダプタ それを拡大する。
3. を右クリックします。 ドライバー (例えば インテル(R)デュアルバンドワイヤレス-AC 3168)をクリックして ドライバの更新.
4。 クリック コンピューターでドライバーを参照する to locate and install a driver manually.
5。 クリックしてください ブラウザ button to choose any directory and click on Next.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, デバイスに最適なドライバーがすでにインストールされています.
6。 クリック 閉じる ウィンドウを終了します。
7. 再起動 the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1。 打ち上げ デバイスマネージャ from the Windows search menu.
2.を右クリックします ドライバー をクリックして デバイスのアンインストール.
3. A warning prompt will be displayed on the screen. Check the box “このデバイスのドライバソフトウェアを削除します” and confirm the prompt by clicking アンインストールする.
4. Download and install the drivers on your device either by a manual update or automatic update.
5。 訪問 メーカーのウェブサイト.
2. もう完成させ、ワークスペースに掲示しましたか? & ダウンロード PC の Windows バージョンに対応するドライバー。
3. ダウンロードしたら、 ダウンロードしたファイル 指示に従ってインストールします。
また読む: How to set up a VPN on Windows 10
方法 10: Windows を更新する
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1。 プレス ウィンドウズ+ I キー 一緒に開く 設定 あなたのコンピュータ上で。
2。 選択 更新とセキュリティ.
3。 選択 更新を確認.
4A. Click [今すぐインストール to download and install the latest update available.
4B. If your system is already up-to-date, then it will show あなたは最新です メッセージ。
方法 11: 最近のアップデートをアンインストールする
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1 押したまま Windows + Rキー 一緒に開けます ラン ダイアログボックス。
2。 タイプ appwiz.cplと ヒット 入力します.
3。 クリック インストールされた更新プログラムを表示.
4. Select the most recent update and click on アンインストールする.
5. Confirm the prompt, if any, and PCを再起動する.
また読む: Firefoxがページを読み込まない場合の修正方法
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the ネットワークアダプター installed in your PC along with their settings. All the stored settings are stored to default settings.
注: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to 設定 その後 エントルピー & 私たちについて . Once you have reset your network, you have to reinstall all networking software ような VPNクライアント or 仮想スイッチ.
1 押したまま Windows + Iキー 一緒に開く Windowsの設定.
2。 クリック ネットワークとインターネット.
3。 クリック ネットワークリセット 下 Status:.
4. をクリックしてプロンプトを確認します。 今すぐリセット.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
推奨:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.