Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows は、このデバイスに必要なドライバーのデジタル署名を確認できません。 最近のハードウェアまたはソフトウェアの変更により、正しく署名されていないか破損しているファイルがインストールされた可能性があります。または、不明なソースからの悪意のあるソフトウェアである可能性があります。 (コード 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
何か問題が発生した場合に備えて、必ず復元ポイントを作成してください。
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
注: Backup the registry just in case something goes wrong.
1.Windows キー + R を押してから、次のように入力します。 regeditを Enter キーを押してレジストリ エディターを開きます。
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3.必ず選択してください {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find UpperFilters と LowerFilters。
4.それぞれを右クリックして選択します。 削除します。
5. PC を再起動して変更を保存します。
方法 2: システムの復元を実行する
1.Windowsキー+Rを押して「」と入力します。sysdm.cplと」と入力して Enter キーを押します。
2.Select システム保護 タブを選択して システムの復元。
3.「次へ」をクリックし、必要な項目を選択します。 システムの復元ポイント.
4.画面上の指示に従ってシステムの復元を完了します。そして、それができるかどうかを確認してください Fix USB Error Code 52 Windows cannot verify the digital signatureそうでない場合は、以下にリストされている方法に進みます。
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.
3.Restart your PC and see if you’re able to Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on 電源スイッチ ホールド シフト をクリックします。入力したコードが正しければ、MFAの設定は正常に完了します 再起動 (while holding the shift button).
2. が表示されるまで Shift ボタンを放さないようにしてください。 「高度な回復オプション」メニュー。
3. 次に、[詳細回復オプション] メニューで次の項目に移動します。
トラブルシューティング > 詳細オプション > 起動設定 > 再起動
4. [再起動] をクリックすると PC が再起動し、オプションのリストが表示されたブルー スクリーンが表示されます。「」というオプションの横にある数字キーを必ず押してください。ドライバー署名の強制を無効にします。「
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc Enter キーを押して、デバイス マネージャーを開きます。
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select ドライバの更新。
7.「更新されたドライバーソフトウェアを自動的に検索します。「
8.Repeat the above process for every problematic device listed in Device Manager.
9. PC を再起動して変更を保存し、保存できるかどうかを確認します。 Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1.Windows キー + R を押してから、次のように入力します。 devmgmt.msc Enterキーを押します。
2.右クリック each of problematic device (yellow exclamation mark next to it) and select アンインストール。
3.Click Yes/OK to continue with uninstallation.
4. PC を再起動して変更を保存します。
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys ファイルへ usbehciold.sys & usbhubold.sys.
3.Windows キー + R を押してから、次のように入力します。 devmgmt.msc Enterキーを押します。
4.展開する ユニバーサルシリアルバスコントローラ 右クリックして Standard Enhanced PCI to USB Host Controller をクリックして アンインストール。
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2.次に、cmd に次のように入力して、Enter キーを押します。
sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:windows
3.上記のプロセスが終了するのを待ち、完了したら PC を再起動します。
4.次に、ここからCHKDSKを実行します チェックディスクユーティリティ(CHKDSK)を使用してファイルシステムエラーを修正します。
5.上記のプロセスを完了させ、PC を再起動して変更を保存します。
できるかどうか確認してください Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1.Windows キー + X を押して選択します。 コマンドプロンプト(管理者)
2.Type the following command into cmd and hit Enter after each one:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set テストサインオン
3.If the above command doesn’t work then try the following:
bcdedit / deletevalue loadoptions
bcdedit -testSIGNINGOFFを設定します
4. PC を再起動して変更を保存します。
あなたにおすすめ:
これで成功です Fix USB Error Code 52 Windows cannot verify the digital signature ただし、このガイドに関してまだ質問がある場合は、コメントのセクションでお気軽に質問してください。