Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
再起動して適切な起動デバイスを選択する問題 [解決済み]
方法 1: 正しいブート順序を設定する
エラーが表示される場合があります」Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.コンピュータの起動時 (ブート画面またはエラー画面の前) に、Delete キーまたは F1 キーまたは F2 キー (コンピュータの製造元によって異なります) を繰り返し押して、 BIOSセットアップに入ります.
2.BIOS セットアップに入ったら、オプションのリストから [Boot] タブを選択します。
3.次に、コンピュータが ハードディスクまたは SSD ブート順序の最優先として設定されます。 そうでない場合は、上矢印キーまたは下矢印キーを使用してハードディスクを一番上に設定します。これは、コンピューターが他のソースではなく最初にそこから起動することを意味します。
4.最後に、F10 を押してこの変更を保存し、終了します。 これは持っている必要があります Fix Reboot and Select Proper Boot Device Issue、そうでない場合は続行します。
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
診断を実行するには、PC を再起動し、コンピューターの起動時に (起動画面の前に) F12 キーを押します。[起動] メニューが表示されたら、[ユーティリティ パーティションから起動] オプションまたは [診断] オプションを強調表示し、Enter キーを押して診断を開始します。 これにより、システムのすべてのハードウェアが自動的にチェックされ、問題が見つかった場合は報告されます。
推奨: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
重要: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Windows 10 の起動可能なインストール DVD を挿入し、PC を再起動します。
2.Press any key to boot from CD or DVD というプロンプトが表示されたら、任意のキーを押して続行します。
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.再起動すると、正常に完了しました Fix Reboot and Select Proper Boot Device issueそうでない場合は、続行します。
また、「自動修復で PC を修復できなかった場合の解決方法」もお読みください。
方法 5: UEFI ブートを有効にする
1.PC を再起動し、PC に応じて F2 または DEL をタップしてブート セットアップを開きます。
2.The make the following changes:
ブート リスト オプションを UEFI に変更します。 レガシー オプション ROM のロードを無効にします。 セキュア ブートを有効にします。
3.次に、F10 をタップして保存し、ブート セットアップを終了します。
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
注: システムで予約済みのパーティション (通常は 100 MB) を常にアクティブとしてマークし、システムで予約済みのパーティションがない場合は、C: ドライブをアクティブなパーティションとしてマークします。
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
方法 7: Windows 10 の修復インストール
上記の解決策がどれもうまくいかない場合は、HDD に問題はないことは確かですが、次のようなエラーが表示される可能性があります。Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key」と表示されるのは、オペレーティング システムまたは HDD 上の BCD 情報が何らかの理由で消去されたためです。この場合、Windows の修復インストールを試すことができますが、これも失敗した場合、残された唯一の解決策は、Windows の新しいコピーをインストールする (クリーン インストール) ことです。
これで成功です 修正する Reboot and Select proper Boot device issue ただし、この投稿に関してまだ質問がある場合は、コメントのセクションで遠慮なく質問してください。