When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistem Operasi Outdated.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikon.
2. If the status is set to Ora nyambung, klik ing Network globe icon, choose your Wi-Fi network and click on Sambungake button. Make sure Mode pesawat ora diuripake.
3. If you again face the same network connection error code, then click on the Pedhot sambungan button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Klik-tengen ing Ikon Wi-Fi Lan pilih Open Network & Internet settings.
6. Klik ing Wi-Fi.
7. Scroll down the right menu, click on Ngatur jaringan sing dikenal.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Lali.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Catetan: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Temokake Tombol daya at the back of your router.
2. Press the button once to mateni.
3. Saiki, medhot sambungan Panjenengan Router power cable lan ngenteni nganti daya wis rampung lemes saka kapasitor.
4. Banjur, sambungake ing kabel listrik lan nguripake sawise menit.
5. Wait until the network connection is re-established and try signing in again.
Uga Waca: Fix Computers Not Showing Up on Network in Windows 10
Cara 3: Jalanake Pemecah Masalah Jaringan
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Tekan ing Tombol Windows lan ngetik Setelan masalah ngatasi ing garis telusuran lan Mbukak.
2. Klik ing Masalah tambahan.
3. Pilih Adaptor Jaringan Lan klik ing Jalanake masalah kasebut.
4. Select the network adapter to diagnose Lan klik ing Sabanjure.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, klik ing Nutup masalah.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Uga Waca: Ndandani Family Sharing YouTube TV Ora Bisa
Cara 4: Ndandani File Sistem
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistem Gambar Checker) /DISM (Penyebaran Layanan Gambar dan Manajemen) utilities on your Windows 10 PC.
1. Tekan ing Tombol Windows, ketik Prompt Command Lan klik ing Run minangka administrator.
2. Klik ing Ya ing Kontrol akun pangguna pitakon.
3. Ketik chkdsk C: / f / r / x printah lan kenek Ketik tombol.
4. Yen sampeyan dijaluk pesen, Chkdsk ora bisa mbukak…volume wis… ing proses nggunakake, banjur, ketik Y lan mencet Ketik tombol.
5. Maneh, ketik printah: sfc / scannow lan penet Ketik tombol kanggo mbukak ing Sistem Gambar Checker pindai
Catetan: Pindai sistem bakal diwiwiti lan butuh sawetara menit kanggo rampung. Sauntara kuwi, sampeyan bisa terus nindakake aktivitas liyane nanging elinga yen ora sengaja nutup jendhela.
Sawise rampung scan, bakal nuduhake salah siji saka pesen iki:
- Perlindhungan Sumber Daya Windows ora nemokake pelanggaran integritas.
- Windows Resource Protection ora bisa nindakake operasi sing dijaluk.
- Windows Resource Protection nemokake file sing rusak lan kasil didandani.
- Windows Resource Protection nemokake file sing rusak nanging ora bisa ndandani sawetara.
6. Sawise pindai rampung, baleni meneh PC sampeyan.
7. Maneh, miwiti Prompt Command minangka administrator lan nglakokake perintah sing diwenehake siji-sijine:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Catetan: Sampeyan kudu duwe sambungan internet sing bisa digunakake kanggo nglakokake perintah DISM kanthi bener.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Tekan ing Tombol Windows lan ngetik Manager Piranti in the Windows search menu. Click on Open.
2. Expand ing Adaptor jaringan bagean kanthi ngeklik kaping pindho ing.
3. Klik-tengen ing Panjenengan driver jaringan (contone, Intel (R) Dual Band Wireless-AC 3168) Banjur pilih Mateni piranti pilihan.
4. Confirm the below prompt by clicking on Ya.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Ngaktifake piranti pilihan.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Uga Waca: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Klik ing Run minangka administrator.
2. Ketik ing ngisor iki perintah lan mencet Ketik tombol.
reset netsh winsock netsh int ip reset ipconfig / release ipconfig / renew
3. Enteni printah kanggo kaleksanan lan urip maneh PC sampeyan.
Cara 7: Siram Cache DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Bukak Prompt Command by searching in the Windows menu and click on Run as administrator.
2. Ketik ipconfig / flushd in the command window and hit Ketik.
Uga Waca: [SOLVED] Windows ndeteksi masalah hard disk
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Bukak Run kothak dialog kanthi mencet Tombol Windows + R bebarengan.
2. Ketik ncpa.cpl lan kenek Ketik tombol.
3. Right-click on your active adaptor jaringan Lan klik ing Properties.
4. Busak centhang ing Internet Protocol Version 6 (TCP / IPv6) pilihan.
5. Akhire, klik ing OK to save the changes and check if the issue is resolved.
Catetan: If you use multiple network connections, navigate to Jaringan lan Pusat Perkongsian lan Ngganti adaptor settings. Right-click on the adapter and select mateni. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Ketik Manager Piranti in the Windows search menu and click Open.
2. Klik kaping pindho ing Adaptor jaringan kanggo nggedhekake.
3. Klik-tengen ing Panjenengan Driver (eg Intel(R) Dual Band Wireless-AC 3168) banjur klik Nganyari driver.
4. Klik ing Telusuri komputer kanggo driver to locate and install a driver manually.
5. Klik ing browser button to choose any directory and click on Sabanjure.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Pembalap paling apik kanggo piranti sampeyan wis diinstal.
6. Klik ing Cedhak kanggo metu jendela.
7. Baleni meneh the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Bukak Manager Piranti from the Windows search menu.
2. Klik-tengen ing Driver Lan pilih Busak instal piranti.
3. A warning prompt will be displayed on the screen. Check the box “Busak piranti lunak driver kanggo piranti iki” and confirm the prompt by clicking Nyopot.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Visit ing situs web pabrikan.
2. Golek lan download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the file sing diundhuh and follow the given instructions to install it.
Uga Waca: How to set up a VPN on Windows 10
Cara 10: Nganyari Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Pencet Windows + Aku tombol bebarengan kanggo mbukak Setelan ing komputer sampeyan.
2. Pilih Nganyari & Keamanan.
3. Pilih Mriksa Update.
4A. Click Instal saiki kanggo ngundhuh lan nginstal nganyari paling anyar sing kasedhiya.
4B. Yen sistem sampeyan wis nganyari, mula bakal ditampilake Sampeyan lagi anyar pesen.
Cara 11: Busak instal Pembaruan Anyar
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pencet terus Tombol Windows + R bebarengan kanggo mbukak Run kothak dialog.
2. Ketik appwiz.cpl lan kenek Ketik.
3. Klik ing Ndeleng update sing diinstal.
4. Select the most recent update and click on Nyopot.
5. Confirm the prompt, if any, and urip maneh PC.
Uga Waca: Carane Ndandani Firefox Ora Loading Kaca
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Catetan: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Setelan banjur sistem lan About. Once you have reset your network, you have to reinstall all networking software seneng klien VPN or Ngalih virtual.
1. Pencet terus Tombol Windows + I bebarengan kanggo mbukak Setelan Windows.
2. Klik ing Jaringan & Internet.
3. Klik ing Résolusi jaringan ing status.
4. Confirm the prompt by clicking on Reset saiki.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recommended:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.