Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
დარწმუნდით, რომ შექმენით აღდგენის წერტილი, თუ რამე არასწორედ მოხდება.
მეთოდი 1: დროებით გამორთეთ ანტივირუსი და Firewall
1. დააწკაპუნეთ მაუსის მარჯვენა ღილაკით ანტივირუსული პროგრამის ხატულა სისტემის უჯრიდან და აირჩიეთ გამორთვა.
2.შემდეგი, აირჩიეთ დრო, რომლისთვისაც ანტივირუსი გამორთული დარჩება.
შენიშვნა: აირჩიეთ ყველაზე მცირე დრო, მაგალითად 15 წუთი ან 30 წუთი.
3.Once done, again check if the error resolves or not.
4. დააჭირეთ Windows Key + I და შემდეგ აირჩიეთ Მართვის პანელი.
5. შემდეგი, დააწკაპუნეთ Სისტემა და უსაფრთხოება.
6. შემდეგ დააწკაპუნეთ Windows Firewall.
7. ახლა მარცხენა ფანჯრის ფანჯრიდან დააწკაპუნეთ Windows Firewall-ის ჩართვა ან გამორთვა.
8.აირჩიეთ გამორთეთ Windows Firewall და გადატვირთეთ კომპიუტერი. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
თუ ზემოთ მოყვანილი მეთოდი არ მუშაობს, დარწმუნდით, რომ მიჰყევით ზუსტად იგივე ნაბიჯებს თქვენი Firewall-ის ხელახლა ჩართვისთვის.
Method 2: Delete Hidden Network Adapters
1. დააჭირეთ Windows Key + R და შემდეგ ჩაწერეთ devmgmt.msc და დააჭირეთ Enter- ს გასახსნელად Მოწყობილობის მენეჯერი.
2.ახლა აირჩიეთ Ქსელის ადაპტერები და შემდეგ დააჭირეთ ნახვა> დამალული მოწყობილობების ჩვენება.
3.Right-click on each of the hidden devices and select მოწყობილობის დეინსტალაცია.
4.Do this for all the hidden devices listed under Network Adapters.
5. გადატვირთეთ კომპიუტერი ცვლილებების შესანახად.
Method 3: Turn ON Network Discovery
1. დააჭირეთ Windows Key + X და შემდეგ აირჩიეთ Მართვის პანელი.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings მარცხენა მენიუდან.
4.Check mark ჩართეთ ქსელის აღმოჩენა and click Save changes.
5. გადატვირთეთ თქვენი კომპიუტერი, რომ შეინახოთ ცვლილებები და ნახოთ, შეძლებთ თუ არა Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. დააჭირეთ Windows Key + R და შემდეგ ჩაწერეთ ncpa.cpl და დააჭირეთ Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select თვისებები.
3. აირჩიეთ ინტერნეტ ოქმი ვერსია 4 (TCP / IPv4) და დააჭირეთ Properties- ს.
4.ახლა დააწკაპუნეთ მოწინავე in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “ჩართეთ NetBIOS TCP / IP– ით“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. დააჭირეთ Windows Key + X და შემდეგ აირჩიეთ Მართვის პანელი.
2.ტიპი რწმუნებათა სიგელი in the control panel search and click on სერთიფიკატების მენეჯერი.
3. აირჩიეთ Windows დიპლომები და შემდეგ დააჭირეთ Add a Windows credential.
4.One by one type the მომხმარებლის სახელი და პაროლი of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select თვისებები.
2.გადართვა გაზიარების ჩანართი and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “გააზიარეთ ეს საქაღალდე” and make sure the Share name is correct.
4. დააწკაპუნეთ Apply-ზე და შემდეგ OK.
Method 7: Change Network Security settings
1. დააჭირეთ Windows Key + R და შემდეგ ჩაწერეთ secpol.msc და დააჭირეთ Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. ორჯერ დააწკაპუნეთ ქსელის უსაფრთხოება: LAN მენეჯერის ავტორიზაციის დონე in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. დააწკაპუნეთ Apply-ზე და შემდეგ OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
მეთოდი 8: TCP / IP- ის გადაყენება
1. დააწკაპუნეთ მაუსის მარჯვენა ღილაკით Windows ღილაკზე და აირჩიეთ “ბრძანების ხაზი (ადმინისტრატორი)."
2. ახლა აკრიფეთ შემდეგი ბრძანება და დააჭირეთ enter თითოეული ბრძანების შემდეგ:
(ა) ipconfig / გამოშვება
(ბ) ipconfig /flushdns
(გ) ipconfig / განახლება
3. ისევ გახსენით Admin Command Prompt და ჩაწერეთ შემდეგი და დააჭირეთ Enter თითოეულის შემდეგ:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip გადატვირთვა
- netsh winsock გადატვირთვის
4. გადატვირთეთ ცვლილებების გამოსაყენებლად.
Შენთვის რეკომენდირებული:
ეს არის ის, რაც თქვენ წარმატებით გაქვთ Fix Error code 0x80070035 The network path was not found მაგრამ თუ ჯერ კიდევ გაქვთ რაიმე შეკითხვა ამ პოსტთან დაკავშირებით, მოგერიდებათ დაუსვათ ისინი კომენტარების განყოფილებაში.