When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- მოძველებული ოპერაციული სისტემა.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ხატი.
2. If the status is set to Არ არის დაკავშირებული, დააკლიკეთ Network globe icon, choose your Wi-Fi network and click on დაკავშირება button. Make sure Თვითმფრინავის რეჟიმში არ არის ჩართული.
3. If you again face the same network connection error code, then click on the Disconnect button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. მარჯვენა ღილაკით დააჭირეთ ღილაკს Wi-Fi ხატულა და აირჩიეთ Open Network & Internet settings.
6. დაწკაპეთ Wi-Fi.
7. Scroll down the right menu, click on მართეთ ცნობილი ქსელები.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Დავიწყება.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Method 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
შენიშვნა: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. იპოვნეთ ჩამრთველი ღილაკი at the back of your router.
2. Press the button once to გამორთე.
3. ახლა, გაწყვეტა თქვენი Router power cable და დაელოდეთ სანამ ენერგია მთლიანად ამოიწურება კონდენსატორებიდან.
4. შემდეგ, ხელახლა la დენის კაბელი და ჩართეთ ერთი წუთის შემდეგ.
5. Wait until the network connection is re-established and try signing in again.
ასევე წაიკითხე: Fix Computers Not Showing Up on Network in Windows 10
მეთოდი 3: გაუშვით ქსელის პრობლემების გადაჭრა
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. დააჭირეთ Windows გასაღები და ტიპის პარამეტრების შეცვლა საძიებო ზოლში და გახსნა.
2. დაწკაპეთ დამატებითი troubleshooters.
3. აირჩიეთ Ქსელის შეერთება და დააჭირეთ გაუშვით პრობლემის მოგვარება.
4. Select the network adapter to diagnose და დააჭირეთ შემდეგი.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, დააკლიკეთ Დახურე პრობლემის მაჩვენებელი.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
ასევე წაიკითხე: Fix Family Sharing YouTube TV Not Working
მეთოდი 4: სისტემის ფაილების შეკეთება
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (სისტემის ფაილი შემოწმება) /DISM (განლაგება Image მომსახურება და მართვა) utilities on your Windows 10 PC.
1. დააჭირეთ Windows გასაღებიტიპი სარდლობის სწრაფი და დააჭირეთ ადმინისტრატორის სახელით გაშვება.
2. დაწკაპეთ დიახ იმ მომხმარებლის ანგარიშის კონტროლი სწრაფი.
3. ტიპი chkdsk C: / f / r / x ბრძანება და დარტყმა შეიყვანეთ გასაღები.
4. If you are prompted with a message, Chkdsk cannot run…the volume is… in use process, then, type Y და მოხვდა შეიყვანეთ გასაღები.
5. Again, type the command: sfc / scannow და დააჭირეთ შეიყვანეთ გასაღები გასაშვებად სისტემის ფაილი შემოწმება სკანირება.
შენიშვნა: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Windows რესურსების დაცვამ ვერ აღმოაჩინა მთლიანობის დარღვევა.
- Windows Resource Protection could not perform the requested operation.
- Windows Resource Protection found corrupt files and successfully repaired them.
- Windows Resource Protection-მა აღმოაჩინა დაზიანებული ფაილები, მაგრამ ზოგიერთი მათგანის გამოსწორება ვერ შეძლო.
6. Once the scan is finished, გადატვირთვა თქვენი კომპიუტერი.
7. Again, launch სარდლობის მოთხოვნა როგორც ადმინისტრატორი and execute the given commands one after the other:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
შენიშვნა: You must have a working internet connection to execute DISM commands properly.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. დააჭირეთ Windows გასაღები და ტიპის Device Manager in the Windows search menu. Click on ღიაა.
2. გაფართოება ქსელის ადაპტერები განყოფილება მასზე ორჯერ დაწკაპუნებით.
3. დააწკაპუნეთ მარჯვენა ღილაკით თქვენს ქსელის დრაივერი (მაგალითად, Intel (R) Dual Band Wireless-AC 3168) და აირჩიეთ მოწყობილობის გამორთვა ვარიანტი.
4. Confirm the below prompt by clicking on დიახ.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the მოწყობილობის ჩართვა ვარიანტი.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
ასევე წაიკითხე: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. გადადით საძიებო მენიუში და ჩაწერეთ cmd. დაწკაპეთ ადმინისტრატორის სახელით გაშვება.
2. ჩაწერეთ შემდეგი ბრძანებები და მოხვდა შეიყვანეთ გასაღები.
netsh winsock გადატვირთვის netsh int ip გადატვირთვა ipconfig / გათავისუფლება ipconfig / განახლება
3. დაელოდეთ ბრძანებების შესრულებას და გადატვირთეთ კომპიუტერი.
მეთოდი 7: გარეცხეთ DNS ქეში
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. დაიწყე სარდლობის სწრაფი by searching in the Windows მენიუ and click on Run as administrator.
2. ტიპი ipconfig / flushdns in the command window and hit შეიყვანეთ.
ასევე წაიკითხე: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. დაიწყეთ გასაშვებად დიალოგური ფანჯარა დაჭერით Windows + R გასაღებები ერთად.
2. ტიპი ncpa.cpl და მოხვდა შეიყვანეთ გასაღები.
3. Right-click on your active ქსელის ადაპტერი და დააჭირეთ განცხადებები.
4. მოხსენით მონიშვნა ინტერნეტ პროტოკოლის ვერსია 6 (TCP / IPv6) ვარიანტი.
5. ბოლოს დააწკაპუნეთ OK to save the changes and check if the issue is resolved.
შენიშვნა: If you use multiple network connections, navigate to ქსელი და გაზიარების ცენტრი მდე შეცვალეთ ადაპტერი settings. Right-click on the adapter and select გამორთე. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. ტიპი Device Manager in the Windows search menu and click ღიაა.
2. ორჯერ დააწკაპუნეთ ქსელის ადაპტერები მისი გაფართოება.
3. დააწკაპუნეთ მარჯვენა ღილაკით თქვენს მძღოლი (მაგალითად Intel(R) Dual Band Wireless-AC 3168) და დააჭირეთ განახლების მძღოლი.
4. დაწკაპეთ დაათვალიერეთ ჩემი კომპიუტერი მძღოლებისთვის to locate and install a driver manually.
5. დაწკაპეთ Browser button to choose any directory and click on შემდეგი.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, თქვენი მოწყობილობის საუკეთესო დრაივერები უკვე დაინსტალირებულია.
6. დაწკაპეთ დახურვა ფანჯრის გასასვლელად.
7. რესტარტი the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. დაიწყე Device Manager from the Windows search menu.
2. მარჯვენა ღილაკით დააჭირეთ ღილაკს მძღოლი და აირჩიეთ მოწყობილობის წაშლა.
3. A warning prompt will be displayed on the screen. Check the box “ამ მოწყობილობის დრაივერის პროგრამული წაშლა” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. ეწვიეთ მწარმოებლის ვებსაიტი.
2. მოვძებნით მდე ಡೌನ್ಲೋಡ್ ಮಾಡಿ the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the გადმოწერილი ფაილი and follow the given instructions to install it.
ასევე წაიკითხე: How to set up a VPN on Windows 10
მეთოდი 10: Windows-ის განახლება
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. პრესა Windows + i გასაღებები ერთად გასახსნელად პარამეტრები თქვენს კომპიუტერში.
2. აირჩიეთ განახლება და უსაფრთხოება.
3. აირჩიეთ შეამოწმოთ განახლებები.
4A. Click ახლა დააინსტალირეთ to download and install the latest update available.
4B. If your system is already up-to-date, then it will show განახლებული ხარ გაგზავნა.
მეთოდი 11: წაშალეთ ბოლო განახლებები
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. დააჭირეთ ღილაკს Windows + R გასაღებები ერთად გავხსნათ გასაშვებად დიალოგური ფანჯარა.
2. ტიპი appwiz.cpl და მოხვდა შეიყვანეთ.
3. დაწკაპეთ დაინსტალირებული განახლებები.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and გადატვირთეთ კომპიუტერი.
ასევე წაიკითხე: როგორ გამოვასწოროთ Firefox, რომელიც არ იტვირთება გვერდებზე
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the ქსელის ადაპტერები installed in your PC along with their settings. All the stored settings are stored to default settings.
შენიშვნა: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to პარამეტრები მაშინ სისტემის მდე მომხმარებლის. Once you have reset your network, you have to reinstall all networking software ისევე როგორც VPN კლიენტები or ვირტუალური კონცენტრატორები.
1. დააჭირეთ ღილაკს Windows + I კლავიშები ერთად გასახსნელად Windows- ის პარამეტრები.
2. დაწკაპეთ ქსელი და ინტერნეტი.
3. დაწკაპეთ ქსელის გადატვირთვა ქვეშ სტატუსი.
4. Confirm the prompt by clicking on გადატვირთვა ახლა.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
რეკომენდებული:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.