Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Reboot and Select Proper Boot Device Issue [SOLVED]
მეთოდი 1: დააყენეთ ჩატვირთვის სწორი რიგი
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. როდესაც თქვენი კომპიუტერი ჩაირთვება (ჩატვირთვის ან შეცდომის ეკრანის დაწყებამდე), განმეორებით დააჭირეთ ღილაკს Delete ან F1 ან F2 (დამოკიდებულია თქვენი კომპიუტერის მწარმოებლის მიხედვით) შედით BIOS კონფიგურაციაში.
2. BIOS-ის დაყენების შემდეგ აირჩიეთ ჩატვირთვის ჩანართი პარამეტრების სიიდან.
3.ახლა დარწმუნდით, რომ კომპიუტერი მყარი დისკი ან SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issueთუ არა, მაშინ გააგრძელეთ.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Diagnostics-ის გასაშვებად თქვენი კომპიუტერი გადატვირთეთ და კომპიუტერის ჩატვირთვისას (ჩატვირთვის ეკრანამდე), დააჭირეთ F12 ღილაკს და როდესაც Boot მენიუ გამოჩნდება, მონიშნეთ Boot to Utility Partition ოფცია ან Diagnostics ოფცია და დააჭირეთ Enter-ს დიაგნოსტიკის დასაწყებად. ეს ავტომატურად შეამოწმებს თქვენი სისტემის ყველა აპარატურას და გამოგიგზავნით შეტყობინებას, თუ რაიმე პრობლემა აღმოჩნდება.
რეკომენდებული: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
მნიშვნელოვანია: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. ჩადეთ Windows 10 ჩამტვირთავი ინსტალაციის DVD და გადატვირთეთ კომპიუტერი.
2.როცა მოგეთხოვებათ დააჭიროთ ნებისმიერ ღილაკს CD ან DVD-დან ჩასატვირთად, დააჭირეთ ნებისმიერ ღილაკს გასაგრძელებლად.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.გადატვირთეთ და წარმატებით გააკეთეთ Fix Reboot and Select Proper Boot Device issueთუ არა, გააგრძელეთ.
ასევე, წაიკითხეთ როგორ გამოვასწოროთ ავტომატური შეკეთება ვერ შეაკეთა თქვენი კომპიუტერი.
მეთოდი 5: ჩართეთ UEFI Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
შეცვალეთ ჩატვირთვის სიის ვარიანტი UEFI-ზე გამორთეთ ჩატვირთვის Legacy ვარიანტი ROM Enable Secure boot
3.შემდეგი, შეეხეთ F10 შესანახად და გამოდით ჩატვირთვის დაყენებიდან.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
შენიშვნა: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
მეთოდი 7: შეკეთება დააინსტალირეთ Windows 10
თუ არცერთი ზემოაღნიშნული გადაწყვეტა არ მუშაობს თქვენთვის, შეგიძლიათ დარწმუნებული იყოთ, რომ თქვენი HDD კარგად არის, მაგრამ შეიძლება ხედავთ შეცდომას.Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key”რადგან ოპერაციული სისტემა ან BCD ინფორმაცია HDD-ზე რატომღაც წაიშალა. კარგად, ამ შემთხვევაში, შეგიძლიათ სცადოთ Windows-ის ინსტალაციის შეკეთება, მაგრამ თუ ეს ასევე ვერ მოხერხდა, ერთადერთი გამოსავალი რჩება Windows-ის ახალი ასლის დაყენება (სუფთა ინსტალაცია).
ეს არის ის, რაც თქვენ წარმატებით გაქვთ ფიქსის Reboot and Select proper Boot device issue მაგრამ თუ ჯერ კიდევ გაქვთ რაიმე შეკითხვა ამ პოსტთან დაკავშირებით, მოგერიდებათ ჰკითხოთ მათ კომენტარების განყოფილებაში.