When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Ескірген операциялық жүйе.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe белгішесі.
2. If the status is set to Қосылмағанбасыңыз Network globe icon, choose your Wi-Fi network and click on қосылу button. Make sure Ұшақ режимі қосылмаған.
3. If you again face the same network connection error code, then click on the Ажырату button, wait for some time and reconnect it again.
4. Try connecting to a different Wifi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. тінтуірдің оң жағын басыңыз Wi-Fi белгішесі тармағын таңдаңыз және Open Network & Internet settings.
6. Басыңыз Wifi.
7. Scroll down the right menu, click on Белгілі желілерді басқарыңыз.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Ұмыт.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
2-әдіс: Маршрутизаторды қайта іске қосыңыз
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Ескерту: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Табу Қуат түймесі at the back of your router.
2. Press the button once to өшір.
3. Енді, ажырату сіздің Router power cable және конденсаторлардан қуат толығымен таусылғанша күтіңіз.
4. Содан кейін, қайта қосыңыз The қуат кабелі және бір минуттан кейін қосыңыз.
5. Wait until the network connection is re-established and try signing in again.
Сондай-ақ оқыңыз: Windows 10 жүйесінде желіде көрсетілмейтін компьютерлерді түзетіңіз
3-әдіс: Желілік ақауларды жою құралын іске қосыңыз
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. түймесін басыңыз Windows кілті және түрі Параметрлердің ақаулықтарын жою іздеу жолағында және Ашық.
2. Басыңыз Қосымша ақаулықтарды жою.
3. Таңдаңыз Желілік адаптер батырмасын басыңыз және Ақаулықтарды жою құралын іске қосыңыз.
4. Select the network adapter to diagnose батырмасын басыңыз және Келесі.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, басыңыз Ақаулықтарды жою құралын жабыңыз.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Сондай-ақ оқыңыз: Отбасымен бөлісу YouTube TV жұмыс істемейтінін түзетіңіз
4-әдіс: Жүйе файлдарын жөндеу
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Жүйелік файл тексергіші) /DISM (Қолдануды басқару және басқару) utilities on your Windows 10 PC.
1. түймесін басыңыз Windows кілті, теріңіз Командалық шақыру батырмасын басыңыз және Әкімші ретінде іске қосыңыз.
2. Басыңыз иә ішінде Пайдаланушы тіркелгісін басқару шақыру.
3. Түрі chkdsk C: / f / r / x пәрмен және соққы Кілт сөзді енгізіңіз.
4. Хабарлама сұралса, Chkdsk іске қосылмайды ... дыбыс көлемі ... пайдалану процесінде, содан кейін теріңіз Y және соққы беріңіз Кілт сөзді енгізіңіз.
5. Қайтадан пәрменді теріңіз: sfc / scannow және баспасөз Кілт сөзді енгізіңіз іске қосу үшін Жүйелік файл тексергіші сканерлеу
Ескерту: Жүйені сканерлеу басталады және оны аяқтауға бірнеше минут кетеді. Осы уақытта сіз басқа әрекеттерді орындауды жалғастыра аласыз, бірақ терезені кездейсоқ жаппауды ұмытпаңыз.
Сканерлеуді аяқтағаннан кейін ол мына хабарлардың бірін көрсетеді:
- Windows ресурстық қорғанысы тұтастықтың бұзылуын таппады.
- Windows ресурстарын қорғау сұралған әрекетті орындай алмады.
- Windows ресурстарын қорғау бүлінген файлдарды тауып, оларды сәтті жөндеді.
- Windows ресурстарын қорғау зақымдалған файлдарды тапты, бірақ олардың кейбірін түзете алмады.
6. Сканерлеу аяқталғаннан кейін, қайтадан қосу компьютерге.
7. Тағы да іске қосыңыз Пәрмен әкімші ретінде сұрау және берілген командаларды бірінен соң бірі орындаңыз:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Онлайн /тазалау-сурет /қалпына келтіру dism.exe /Online /cleanup-image /startcomponentcleanup
Ескерту: DISM пәрмендерін дұрыс орындау үшін сізде жұмыс істейтін интернет байланысы болуы керек.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. түймесін басыңыз Windows кілті және түрі Құрылғы менеджері in the Windows search menu. Click on ашық.
2. кеңейтіңіз Желілік адаптерлер бөлімін екі рет басу арқылы таңдаңыз.
3. Тінтуірдің оң жақ түймешігімен басыңыз Желі драйвері (Мысалға, Intel (R) Dual Band Wireless-AC 3168) таңдаңыз Құрылғыны өшіріңіз опция.
4. Confirm the below prompt by clicking on иә.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Құрылғыны қосыңыз опция.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Сондай-ақ оқыңыз: Түзету Windows жүйесі осы желінің прокси параметрлерін автоматты түрде анықтай алмады
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Іздеу мәзіріне өтіп, теріңіз cmd. Басыңыз Әкімші ретінде іске қосыңыз.
2. Келесіні теріңіз командалар және соққы беріңіз Кілт сөзді енгізіңіз.
netsh winsock ысыру netsh int ip қалпына келтіру ipconfig / босату ipconfig / renew
3. Командалардың орындалуын күтіңіз және компьютерді қайта жүктеңіз.
7-әдіс: DNS кэшін тазалау
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Іске қосу Командалық шақыру by searching in the Windows мәзірі and click on Run as administrator.
2. Түрі ipconfig / flushdns in the command window and hit кіру.
Сондай-ақ оқыңыз: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1.. Іске қосыңыз жүгіру басу арқылы диалогтық терезені ашыңыз Windows + R пернелері бірге.
2. Түрі ncpa.cpl және хит Кілт сөзді енгізіңіз.
3. Right-click on your active желі адаптері батырмасын басыңыз және Сипаттар.
4. құсбелгісін алып тастаңыз Интернет протоколының 6-нұсқасы (TCP / IPv6) опция.
5. Соңында түймесін басыңыз OK to save the changes and check if the issue is resolved.
Ескерту: If you use multiple network connections, navigate to Желі және ортақ пайдалану орталығы және Адаптерді ауыстырыңыз settings. Right-click on the adapter and select өшіру. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Түрі Құрылғы менеджері in the Windows search menu and click ашық.
2. түймесін екі рет басыңыз Желілік адаптерлер оны кеңейту.
3. Тінтуірдің оң жақ түймешігімен басыңыз жүргізуші (мысалы Intel(R) қос жолақты сымсыз-AC 3168) батырмасын басыңыз Драйверді жаңартыңыз.
4. Басыңыз Драйверлер үшін компьютерімді қарап шығыңыз to locate and install a driver manually.
5. Басыңыз Браузер button to choose any directory and click on Келесі.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Құрылғыңыз үшін ең жақсы драйверлер орнатылған.
6. Басыңыз жақын терезеден шығу үшін.
7. Қайтадан қосу the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Іске қосу Құрылғы менеджері from the Windows search menu.
2. тінтуірдің оң жағын басыңыз жүргізуші тармағын таңдаңыз және Құрылғыны жою.
3. A warning prompt will be displayed on the screen. Check the box “Бұл құрылғы үшін драйвер бағдарламалық құралын жою” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. келу өндірушінің веб-сайты.
2. табу және жүктеу the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the жүктелген файл and follow the given instructions to install it.
Сондай-ақ оқыңыз: How to set up a VPN on Windows 10
10-әдіс: Windows жүйесін жаңарту
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Түймесін басыңыз Windows+I пернелері ашу үшін бірге Параметрлер компьютеріңізде.
2. Таңдаңыз Жаңарту және қауіпсіздік.
3. Таңдаңыз Жаңартуларды тексеру.
4A. Click Қазір орнату қол жетімді соңғы жаңартуды жүктеп алу және орнату үшін.
4B. Егер сіздің жүйеңіз қазірдің өзінде жаңартылған болса, ол көрсетіледі Сіз жаңарғансыз хабар.
11-әдіс: Соңғы жаңартуларды жою
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. түймесін басып тұрыңыз Windows + R пернелері ашу үшін бірге жүгіру тілқатысу терезесі.
2. Түрі appwiz.cpl және хит кіру.
3. Басыңыз Орнатылған жаңартуларды көру.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and компьютерді қайта жүктеңіз.
Сондай-ақ оқыңыз: Firefox беттер жүктелмейтінін қалай түзетуге болады
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Ескерту: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Параметрлер содан кейін жүйе және туралы. Once you have reset your network, you have to reinstall all networking software сияқты VPN клиенттері or Виртуалды қосқыштар.
1. түймесін басып тұрыңыз Windows + I пернелері ашу үшін бірге Windows параметрлері.
2. Басыңыз Желі және Интернет.
3. Басыңыз Желіні қалпына келтіру астында мәртебе.
4. түймесін басу арқылы сұрауды растаңыз Қазір қалпына келтіру.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Ұсынылған:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.