Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Қайта жүктеп, дұрыс жүктеу құрылғысын таңдау мәселесі [ШЕШІЛГЕН]
1-әдіс: Дұрыс жүктеу ретін орнату
Сіз қатені көріп отырған шығарсызReboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Компьютер іске қосылғанда (жүктеу экраны немесе қате экраны алдында) жою үшін Delete немесе F1 немесе F2 пернесін (компьютер өндірушісіне байланысты) қайталап басыңыз. BIOS орнатуға кіріңіз.
2. BIOS параметрлерін орнатқаннан кейін опциялар тізімінен Жүктеу қойындысын таңдаңыз.
3.Енді компьютердің екеніне көз жеткізіңіз Қатты диск немесе SSD Жүктеу тәртібінде басты басымдық ретінде орнатылған. Олай болмаса, қатты дискіні жоғарғы жағына орнату үшін жоғары немесе төмен көрсеткі пернелерді пайдаланыңыз, яғни компьютер басқа көздерден емес, алдымен одан жүктеледі.
4.Соңында, осы өзгерісті сақтау және шығу үшін F10 пернесін басыңыз. Бұл болуы керек Fix Reboot and Select Proper Boot Device Issue, болмаса, жалғастырыңыз.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Диагностиканы іске қосу үшін компьютерді қайта іске қосыңыз және компьютер іске қосылған кезде (жүктеу экраны алдында) F12 пернесін басыңыз және Жүктеу мәзірі пайда болғанда, Utility бөліміне жүктеу опциясын немесе Диагностика опциясын бөлектеп, диагностиканы бастау үшін enter пернесін басыңыз. Бұл жүйенің барлық аппараттық құралдарын автоматты түрде тексереді және қандай да бір мәселе табылса, хабар береді.
Ұсынылған: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Маңызды: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Windows 10 жүктелетін орнату DVD дискісін салып, компьютерді қайта іске қосыңыз.
2. CD немесе DVD дискісінен жүктеу үшін кез келген пернені басыңыз сұралғанда, жалғастыру үшін кез келген пернені басыңыз.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Қайта іске қосыңыз және сәтті болдыңыз Fix Reboot and Select Proper Boot Device issue, болмаса, жалғастырыңыз.
Сондай-ақ, Автоматты жөндеу компьютерді жөндей алмағанын қалай түзетуге болатынын оқыңыз.
Method 5: Enable UEFI Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Ескерту: Әрқашан жүйелік резервтелген бөлімді (әдетте 100 мб) белсенді деп белгілеңіз, ал егер сізде жүйелік резервтелген бөлім болмаса, C: Drive белгішесін белсенді бөлім ретінде белгілеңіз.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
7-әдіс: Windows 10 жүйесін жөндеу
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
Міне, сіз сәтті болдыңыз Fix Reboot and Select proper Boot device issue бірақ егер сізде әлі де осы жазбаға қатысты сұрақтарыңыз болса, оларды түсініктеме бөлімінде сұраңыз.