Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
ត្រូវប្រាកដថាបង្កើតចំណុចស្ដារឡើងវិញ ក្នុងករណីមានអ្វីមួយខុសប្រក្រតី។
វិធីទី ៥៖ បិទកំចាត់មេរោគ និងជញ្ជាំងភ្លើងជាបណ្តោះអាសន្ន
1. ចុចកណ្ដុរស្ដាំលើ រូបតំណាងកម្មវិធីកំចាត់មេរោគ ពីថាសប្រព័ន្ធហើយជ្រើសរើស បិទ។
2.បន្ទាប់ ជ្រើសរើសស៊ុមពេលវេលាដែល កំចាត់មេរោគនឹងនៅតែបិទ។
ចំណាំ៖ ជ្រើសរើសពេលវេលាតិចបំផុតដែលអាចធ្វើទៅបាន ឧទាហរណ៍ ១៥ នាទី ឬ ៣០ នាទី។
3.Once done, again check if the error resolves or not.
4. ចុច Windows Key + I បន្ទាប់មកជ្រើសរើស ផ្ទាំងបញ្ជា។
5.បន្ទាប់ ចុចលើ ប្រព័ន្ធនិងសន្តិសុខ។
6.បន្ទាប់មកចុចលើ ជញ្ជាំងភ្លើងវីនដូ។
7.Now ពីបន្ទះបង្អួចខាងឆ្វេងចុចលើ បើក ឬបិទ Windows Firewall ។
8.ជ្រើសរើស បិទ Windows Firewall ហើយចាប់ផ្តើមកុំព្យូទ័ររបស់អ្នកឡើងវិញ។ And see if you’re able to Fix Error code 0x80070035 The network path was not found.
ប្រសិនបើវិធីសាស្ត្រខាងលើមិនដំណើរការ ត្រូវប្រាកដថាធ្វើតាមជំហានដូចគ្នា ដើម្បីបើក Firewall របស់អ្នកម្តងទៀត។
Method 2: Delete Hidden Network Adapters
1. ចុច Windows Key + R បន្ទាប់មកវាយ devmgmt.msc ហើយចុច Enter ដើម្បីបើក អ្នកគ្រប់គ្រងឧបករណ៍។
2. ឥឡូវជ្រើសរើស អាដាប់ធ័របណ្តាញ ហើយបន្ទាប់មកចុច មើល > បង្ហាញឧបករណ៍ដែលលាក់។
3.Right-click on each of the hidden devices and select លុបឧបករណ៍។
4.Do this for all the hidden devices listed under Network Adapters.
5. ចាប់ផ្ដើមកុំព្យូទ័ររបស់អ្នកឡើងវិញ ដើម្បីរក្សាទុកការផ្លាស់ប្តូរ។
Method 3: Turn ON Network Discovery
1. ចុច Windows Key + X បន្ទាប់មកជ្រើសរើស ផ្ទាំងបញ្ជា។
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings ពីម៉ឺនុយខាងឆ្វេង។
4.Check mark បើកការរកឃើញបណ្តាញ and click Save changes.
5. ចាប់ផ្ដើមកុំព្យូទ័ររបស់អ្នកឡើងវិញ ដើម្បីរក្សាទុកការផ្លាស់ប្តូរ ហើយមើលថាតើអ្នកអាចធ្វើឬអត់ Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. ចុច Windows Key + R បន្ទាប់មកវាយ ncpa.cpl ហើយវាយបញ្ចូល។
2.Right-click on your active Wi-Fi or ethernet connection and select លក្ខណៈសម្បត្តិ។
3. ជ្រើសរើស ពិធីការអ៊ីនធឺណិតកំណែ 4 (TCP / IPv4) ហើយចុចលក្ខណសម្បត្តិ។
4. ឥឡូវចុច កម្រិតខ្ពស់ in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “បើកដំណើរការ NetBIOS លើ TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. ចុច Windows Key + X បន្ទាប់មកជ្រើសរើស ផ្ទាំងបញ្ជា។
2. ប្រភេទ លិខិតសម្គាល់ in the control panel search and click on អ្នកគ្រប់គ្រងព័ត៌មាន។
3. ជ្រើសរើស អត្តសញ្ញាណប័ណ្ណវីនដូ ហើយបន្ទាប់មកចុចលើ Add a Windows credential.
4.One by one type the ឈ្មោះអ្នកប្រើប្រាស់និងពាក្យសម្ងាត់ of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select លក្ខណៈសម្បត្តិ។
2. ប្តូរទៅ ផ្ទាំងចែករំលែក and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “ចែករំលែកថតនេះ” and make sure the Share name is correct.
4. ចុច Apply បន្តដោយ OK ។
Method 7: Change Network Security settings
1. ចុច Windows Key + R បន្ទាប់មកវាយ secpol.msc ហើយវាយបញ្ចូល។
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. ចុចពីរដងលើ Network security: LAN Manager authentication level in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. ចុច Apply បន្តដោយ OK ។
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
វិធីទី ១ ៈកំណត់ឡើងវិញនូវ TCP / IP
1. ចុចកណ្ដុរស្ដាំលើប៊ូតុង Windows ហើយជ្រើសរើស "ប្រអប់បញ្ចូលពាក្យបញ្ជា (អ្នកគ្រប់គ្រង) ។"
2.ឥឡូវវាយពាក្យបញ្ជាខាងក្រោមហើយចុច Enter បន្ទាប់ពីពាក្យនីមួយៗ៖
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3. បើក Admin Command Prompt ម្តងទៀត ហើយវាយពាក្យខាងក្រោម រួចចុច Enter បន្ទាប់ពីនីមួយៗ៖
- ipconfig / flushdns
- nbtstat -r
- netsh int ip reset
- កំណត់ឡើងវិញ ninsh winsock
4. ចាប់ផ្ដើមឡើងវិញដើម្បីអនុវត្តការផ្លាស់ប្តូរ។
បានណែនាំសម្រាប់អ្នក:
នោះហើយជាវាអ្នកទទួលបានជោគជ័យ Fix Error code 0x80070035 The network path was not found ប៉ុន្តែប្រសិនបើអ្នកនៅតែមានចម្ងល់ទាក់ទងនឹងការបង្ហោះនេះ សូមសួរពួកគេនៅក្នុងផ្នែកនៃមតិយោបល់។