Sometimes, when you connect to any limited network, you may end up with No internet, secured prompt. So, when you run Network diagnostics tool, the error code 0x00028001 will prompt on the screen. The most common reason for this error code is your network is being connected to a limited WiFi connection network. If you are also facing network error code 0x00028001, this guide will help you resolve the same. So, continue reading.
How to Fix Network Error 0x00028001 on Windows 10
You may wonder why network error 0x00028001 occurs on ប្រព័ន្ធប្រតិបត្តិការ Windows 10. Here are some valid reasons that trigger this problem in your device.
- Infrastructure failure of your Windows 10 PC.
- Network connection is very bad.
- The cable connecting the router and the modem are damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between router and your device.
- Outdated network drivers.
In this section, we have gathered some potential fixes that will help you fix 0x00028001 error code. Follow as instructed to attain perfect outcomes.
ចំណាំ: ត្រូវប្រាកដថាអ្នកបង្កើតចំណុចស្ដារប្រព័ន្ធ ដើម្បីស្ដារកុំព្យូទ័ររបស់អ្នកឡើងវិញ ប្រសិនបើមានអ្វីមួយខុសប្រក្រតី។
វិធីសាស្រ្តដោះស្រាយបញ្ហាជាមូលដ្ឋាន
Follow the basic troubleshooting steps listed below before going through the advanced methods.
1. ចាប់ផ្ដើមកុំព្យូទ័រឡើងវិញ
1 ។ ចុចប៊ូតុង គ្រាប់ចុច Alt + F4 រួមគ្នាដើម្បីបើក បិទវីនដូ បង្អួច។
2 ។ ជ្រើសយក ចាប់ផ្តើមឡើងវិញ ជម្រើសហើយចុច បញ្ចូលលេខកូដ.
2. Ensure Strong Network Signal
You will not face any connectivity issues in your Windows 10 computer only if you have a strong network connection. If there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems.
1. Move your router to some other place and check the internet connectivity.
2. Find the signal strength of your network and if it is very low, clear all the obstructions in between the way.
3. ជៀសវាងឧបករណ៍ច្រើនពេក ភ្ជាប់ទៅបណ្តាញតែមួយ។
4. ជៀសវាងការជ្រៀតជ្រែកឥតខ្សែ from devices like wireless headphones, head sets, TV and a lot more.
5. Move your PC closer to the router and check if the error recurs again.
3. ចាប់ផ្តើមរ៉ោតទ័រឡើងវិញ
This is a simple work around that will help you fix 0x00028001 error code within simple steps. This also ensures a strong and reliable network connection. Follow the below mentioned steps to restart your router. By doing so, you will establish a fresh internet connection between the client and the server. You can restart your router by following our guide Restart Router or Modem. Once your router has restarted, check if you can have fixed the error.
សូមអានផងដែរ: ជួសជុលគ្មានបណ្តាញ WiFi ត្រូវបានរកឃើញនៅក្នុង Windows 10
4. Reconnect to Internet
This is another simple workaround that fixes 0x00028001 error code. Your computer must connect either to Ethernet or to Wi-Fi network at a time. Check if this condition applies to your computer and if you guess any interruptions between your wired and wireless connections, reconnect them as instructed below.
1. ផ្ដាច់ ការភ្ជាប់បណ្តាញរបស់អ្នក រង់ចាំមួយរយៈ ហើយភ្ជាប់វាម្តងទៀត។
2. ប្រសិនបើ ខ្សែអ៊ីសឺរណិត ត្រូវបានដោតចូល យកវាចេញពីកុំព្យូទ័ររបស់អ្នក។ បន្ទាប់មក ភ្ជាប់វាឡើងវិញ ឬភ្ជាប់វាទៅបណ្តាញ Wi-Fi។ វានឹងធានាថាមិនមានការភ្លឹបភ្លែតៗរវាងការតភ្ជាប់តាមខ្សែ និងឥតខ្សែ។
5. Disable Airplane Mode
Enabling Airplane mode will disable WiFi, Bluetooth, cellular mode, all radio services, etc. Thus, you are advised to disable airplane mode to fix 0x00028001 error code. Usually, there is a dedicated key on your keyboard to enable or disable Airplane mode. Hit the key to do the same or implement the below-listed instructions.
ចុចនិងសង្កត់ គ្រាប់ចុច Windows + A រួមគ្នាដើម្បីបើក មជ្ឈមណ្ឌលសកម្មភាព. Check if the របៀបជិះយន្តហោះ។ ត្រូវបានបើក។
2A. If របៀបជិះយន្តហោះ។ is turned on, click on the setting to turn it off.
2B ប្រសិនបើ របៀបជិះយន្តហោះ។ is not turned on, skip to the next method.
6. Enable Wi-Fi Connection
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face 0x00028001 error code. But, there are a few simple instructions to enable WiFi on your computer.
រុករកទៅឯកសារ រត់ ប្រអប់ប្រអប់ដោយចុច គ្រាប់ចុចវីនដូ + អាន ជាមួយគ្នា។
2 ។ វាយ ncpa.cpl និងវាយ បញ្ចូលលេខកូដ.
3. Now, right-click on your active អាដាប់ទ័របណ្តាញ and check whether it is enabled or disabled.
3A ចុចលើ អនុញ្ញាត if the status is disabled.
3B ប្រសិនបើ ស្ថានភាព is already in Enable, move to the next method.
Check if you have fixed 0x00028001 error code is fixed.
សូមអានផងដែរ: How to Troubleshoot Network Connectivity Problems on Windows 10
Method 1: Restart Windows Explorer Process
Some users have reported that restarting Windows Explorer processes will help to resolve 0x00028001 error code. Follow the below-listed instructions to do the same.
1. វាយ បញ្ជា (Ctrl) + ប្ដូរ (Shift) + គ្រាប់ចុចគេច (Esc) រួមគ្នាដើម្បីបើក កម្មវិធីគ្រប់គ្រងភារកិច្ច.
2 ។ ក្នុង ដំណើរការ ផ្ទាំងចុចលើ កម្មវិធីរុករកវីនដូ ហើយជ្រើសយក ចាប់ផ្តើមឡើងវិញ ប៊ូតុង។
3. Now, Windows Explorer restarts and 0x00028001 error code will be fixed now.
វិធីទី ៤៖ ដំណើរការបណ្តាញដោះស្រាយបញ្ហា
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix 0x00028001 error code. Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed 0x00028001 error code.
សូមអានផងដែរ: របៀបកំណត់ការកំណត់បណ្តាញឡើងវិញនៅលើ Windows 10
វិធីសាស្រ្តទី 3: ចេញពីដំណើរការផ្ទៃខាងក្រោយទាំងអស់។
If there are a bulk of background processes in your Windows 10 computer, you cannot access the network that easy, since all those processes will take a share of the network. Also, RAM consumption will be more and the performance of the device will slow down apparently. Follow our guide How to End Task in Windows 10 to close all other background processes in your Windows 10 PC.
After closing all the background processes, check if 0x00028001 error code is fixed or not.
វិធីសាស្រ្តទី 4: ជួសជុលឯកសារប្រព័ន្ធ
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing 0x00028001 error code very recently, there are some chances that your computer files have become corrupt or damaged. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
សូមអានផងដែរ: ជួសជុល Windows 10 Netwtw04.sys កំហុសអេក្រង់ខៀវ
វិធីទី ៦៖ ដំណើរការស្កេនមេរោគ
Sudden virus or malware attack will result in network problems in your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer. You are advised to scan your computer as instructed in our guide How do I Run a Virus Scan on my Computer?
ដូចគ្នានេះផងដែរ ប្រសិនបើអ្នកចង់លុបមេរោគនៅក្នុងកុំព្យូទ័ររបស់អ្នក សូមពិនិត្យមើលការណែនាំរបស់យើង របៀបលុបមេរោគចេញពីកុំព្យូទ័ររបស់អ្នកនៅក្នុង Windows 10 ។
វិធីសាស្រ្ត 6: ធ្វើបច្ចុប្បន្នភាពវីនដូ
You can also eradicate software side bugs in your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update
បន្ទាប់ពីធ្វើបច្ចុប្បន្នភាពប្រព័ន្ធប្រតិបត្តិការ Windows របស់អ្នក សូមពិនិត្យមើលថាតើអ្នកអាចភ្ជាប់ទៅបណ្តាញរបស់អ្នកបានដែរឬទេ។
សូមអានផងដែរ: ជួសជុលកុំព្យូទ័រមិនបង្ហាញនៅលើបណ្តាញនៅក្នុង Windows 10
វិធីទី ៤៖ បិទ VPN និងម៉ាស៊ីនមេប្រូកស៊ី
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face 0x00028001 error code. If you have installed any VPN service or use proxy servers on your PC, read our How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed 0x00028001 error code. Still, if you face the same problem, try connecting to a ចំណុចក្តៅចល័ត។
Method 8: Reset TCP or IP Protocol
TCP (Transmission Control Protocol) គឺជាពិធីការភ្ជាប់បណ្តាញដ៏សំខាន់ដែលបែងចែក និងកំណត់អត្តសញ្ញាណ ច្បាប់ និង ស្ដង់ដារ នីតិវិធីតាមអ៊ីនធឺណិត។ ពិធីការ TCP/IP ទទួលខុសត្រូវចំពោះការផ្ទេរកញ្ចប់ទិន្នន័យពីអ្នកផ្ញើ និងអ្នកទទួល។ ប្រសិនបើមានការប៉ះទង្គិចនៅក្នុងដំណើរការ ការកំណត់ពិធីការឡើងវិញរួមជាមួយនឹងអាសយដ្ឋាន IP នឹងជួយអ្នកដោះស្រាយបញ្ហាដែលបានពិភាក្សា។ អនុវត្តតាមការណែនាំរបស់យើងអំពីវិធីដោះស្រាយបញ្ហាការតភ្ជាប់បណ្តាញនៅលើ Windows 10 ដើម្បីកំណត់ TCP/IP ឡើងវិញ។
After implementing the steps, check if you can fix network keeps dropping or not.
វិធីទី ៧៖ ប្រើ Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix 0x00028001 error code. To do so, follow our guide on How to change DNS settings in Windows 10.
សូមអានផងដែរ: របៀបផ្លាស់ប្តូរការកំណត់ម៉ាស៊ីនមេ DNS នៅលើ Windows 11
Method 10: Disable Power Saving Mode
Sometimes, you may face 0x00028001 error code if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1. វាយ គ្រាប់វីនដូវាយ អ្នកគ្រប់គ្រងឧបករណ៍ ហើយចុចលើ បើកទូលាយ.
2. Now, double-click on the អាដាប់ទ័របណ្តាញ ផ្នែក។
3. បន្ទាប់មកចុចខាងស្តាំលើរបស់អ្នក។ អាដាប់ធ័របណ្តាញ ហើយជ្រើសយក លក្ខណៈសម្បត្តិ ជម្រើសដូចដែលបានបង្ហាញ។
4. បន្ទាប់មកប្តូរទៅ ការគ្រប់គ្រងថាមពល window in the Network adapter properties window and uncheck the box next to អនុញ្ញាតឱ្យកុំព្យូទ័របិទឧបករណ៍នេះដើម្បីសន្សំថាមពល.
5. ជាចុងក្រោយចុចលើ OK ដើម្បីរក្សាទុកការផ្លាស់ប្តូរ។
Check if you have your computer is out of network connectivity issues.
Method 11: Enable Essential Services
To avoid and prevent 0x00028001 error code occurring in your PC, few essential services must have active status. When there is a problem with any of these services, you will face several conflicts in connecting to a network. Here are a few instructions to check if the essential services are running on your PC.
1 ។ វាយ សេវាកម្ម នៅក្នុងប្រអប់ស្វែងរក ហើយចុចលើ បើកទូលាយ.
2. Now, scroll down and search for the Windows EventLog សេវា។
3. ពិនិត្យមើលឯកសារ ស្ថានភាព នៃសេវាកម្ម។
3A ប្រសិនបើ ស្ថានភាព ត្រូវបានកំណត់ទៅ ការរត់, right-click on the service and select the បញ្ឈប់ option. Wait for a while and then click on ចាប់ផ្តើម ជាថ្មីម្តងទៀត។
3B ប្រសិនបើ ស្ថានភាព is មិនមាន កំណត់ទៅ ការរត់, right-click on the service and select the ចាប់ផ្តើម ជម្រើស។
4. Repeat the above steps for the below ។ ផងដែរ។
- ការហៅតាមនីតិវិធីពីចម្ងាយ (RPC)
- Windows Update
- អតិថិជន DHCP
- Network Connected Devices Auto-Setup
- ឈ្មួញកណ្តាលការតភ្ជាប់បណ្តាញ
- ការតភ្ជាប់បណ្តាញ
- Network Connectivity Assistant
- សេវាកម្មបញ្ជីបណ្តាញ
- ការយល់ដឹងអំពីទីតាំងបណ្តាញ
- Network Setup Service
- សេវាចំណុចប្រទាក់ហាងបណ្តាញ
Finally, check if you have fixed the discussed issue.
សូមអានផងដែរ: ជួសជុល Windows មិនអាចរកឃើញការកំណត់ប្រូកស៊ីរបស់បណ្តាញនេះដោយស្វ័យប្រវត្តិទេ។
វិធីទី ៥៖ បិទកំចាត់មេរោគជាបណ្តោះអាសន្ន (ប្រសិនបើមាន)
Some incompatible antivirus programs installed in your computer will cause network error 0x00028001 error code. To avoid conflicts, you must ensure the security settings of your Windows 10 computer and check if they are stable or not. To find whether the antivirus suite is the reason for network keeps dropping issue, disable it once and try connecting to a network. Read our guide on How to Disable Antivirus Temporarily on Windows 10 and follow the instructions to disable your Antivirus program temporarily on your PC.
If you did not face any internet connectivity issues after disabling the antivirus program in your computer, you are advised to uninstall the program completely from your PC. Read our guide Force Uninstall Programs which won’t Uninstall In Windows 10 to uninstall your antivirus program in your computer.
វិធីទី ៦៖ បិទ Windows Defender Firewall (មិនត្រូវបានណែនាំ)
Like antivirus program, Windows Defender Firewall in your computer might prevent internet access, for some security reasons. If in case, WiFi network has been blocked by Windows Defender Firewall, you have to enable it or disable the Firewall securities temporarily from your computer. If you do not know how to disable Windows Defender Firewall, our guide How to Disable Windows 10 Firewall will help you do so.
វិធីសាស្រ្ត 14: ធ្វើបច្ចុប្បន្នភាពកម្មវិធីបញ្ជាបណ្តាញ
ត្រូវប្រាកដថាអ្នកកំពុងប្រើកម្មវិធីបញ្ជាបណ្តាញដែលបានអាប់ដេត ហើយប្រសិនបើមានការអាប់ដេតណាមួយកំពុងរង់ចាំអ្នកត្រូវបានណែនាំឱ្យទាញយក និងដំឡើងដូចគ្នា។ អនុវត្តតាមការណែនាំរបស់យើងអំពីរបៀបធ្វើបច្ចុប្បន្នភាពកម្មវិធីបញ្ជាអាដាប់ធ័របណ្តាញនៅលើ Windows 10 ដើម្បីធ្វើដូច្នេះបាន។ នៅពេលដែលអ្នកបានធ្វើបច្ចុប្បន្នភាពកម្មវិធីបញ្ជាបណ្តាញរបស់អ្នក, ចាប់ផ្ដើមឡើងវិញ your computer and test the network connection. You will not 0x00028001 error code again.
សូមអានផងដែរ: ជួសជុល Ethernet មិនមានកំហុសក្នុងការកំណត់ IP ត្រឹមត្រូវ។
វិធីសាស្រ្ត 15: ដំឡើងកម្មវិធីបញ្ជាបណ្តាញឡើងវិញ
Still, if you face 0x00028001 error code even after updating network drivers, there is another fix to delete all the drivers in your computer and reinstall them again. This process stabilizes the network connectivity problems thereby resolving network keeps disconnecting Windows 10 issue. Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 to reinstall drivers in your Windows 10 computer.
បន្ទាប់ពីដំឡើងកម្មវិធីបញ្ជាបណ្តាញឡើងវិញ សូមពិនិត្យមើលថាតើអ្នកអាចភ្ជាប់ទៅបណ្តាញដោយគ្មានបញ្ហាឬអត់។
វិធីសាស្រ្ត 16: ត្រឡប់កម្មវិធីបញ្ជាបណ្តាញ
All the current versions drivers will be deleted from your PC and previous version of them will be installed when you roll back your network drivers. This is a helpful feature when any new driver is incompatible with the system. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix 0x00028001 error code.
បន្ទាប់ពីកុំព្យូទ័រ Windows 10 របស់អ្នកបានដំឡើងកំណែមុននៃកម្មវិធីបញ្ជា សូមពិនិត្យមើលថាតើអាចភ្ជាប់ទៅបណ្តាញដោយមិនមានការរំខានឬអត់។
វិធីទី 17៖ កំណត់ការកំណត់បណ្តាញឡើងវិញ
អ្នកប្រើប្រាស់ជាច្រើនបានប្រកាសថា ការកំណត់បណ្តាញឡើងវិញនឹងដោះស្រាយបញ្ហាការតភ្ជាប់បណ្តាញចម្លែក។ វិធីសាស្រ្តនេះនឹងបំភ្លេចការកំណត់រចនាសម្ព័ន្ធបណ្តាញទាំងអស់ ឯកសារសម្គាល់អត្តសញ្ញាណដែលបានរក្សាទុក និងកម្មវិធីសុវត្ថិភាពជាច្រើនទៀតដូចជា VPN និងកម្មវិធីកំចាត់មេរោគ។ ដើម្បីធ្វើដូច្នេះ សូមអនុវត្តតាមការណែនាំរបស់យើងអំពី របៀបកំណត់ការកំណត់បណ្តាញឡើងវិញនៅលើ Windows 10
សូមអានផងដែរ: របៀបតំឡើងការចែករំលែកឯកសារបណ្តាញនៅលើ Windows 10
វិធីទី ៨៖ អនុវត្តការស្តារប្រព័ន្ធឡើងវិញ
If you have recently updated your Windows 10 operating system and later facing network error 0x00028001 error code, the latest Windows update components may interfere with any software present in your computer and may cause network keeps disconnecting Windows 10 issue. So, in this case, you must restore your computer to the previous version when it was working fine. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network without any problems.
វិធីទី ៩៖ កំណត់កុំព្យូទ័រឡើងវិញ
If none of the methods have helped you fix 0x00028001 error code, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Method 20: Contact Internet Service Provider
Last but not the least, you have to seek for technical support if above-listed methods fail to resolve network error 0x00028001 error. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device.
For instance, when you try to register your modem but face troubles during the process, several authentication attempts will slow down your network connection. This will lead to 0x00028001 error. So, in this case you have to contact your Internet Service Provider to diagnose and resolve the problem. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
បានផ្ដល់អនុសាសន៍:
យើងសង្ឃឹមថាការណែនាំនេះមានប្រយោជន៍ ហើយអ្នកអាចជួសជុលបាន។ network error 0x00028001 in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.