Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
ಏನಾದರೂ ತಪ್ಪಾದಲ್ಲಿ ಮರುಸ್ಥಾಪನೆ ಬಿಂದುವನ್ನು ರಚಿಸಲು ಖಚಿತಪಡಿಸಿಕೊಳ್ಳಿ.
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
ಸೂಚನೆ: Backup the registry just in case something goes wrong.
1. ವಿಂಡೋಸ್ ಕೀ + ಆರ್ ಒತ್ತಿ ನಂತರ ಟೈಪ್ ಮಾಡಿ regedit ಮತ್ತು ರಿಜಿಸ್ಟ್ರಿ ಎಡಿಟರ್ ತೆರೆಯಲು ಎಂಟರ್ ಒತ್ತಿರಿ.
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3.ಆಯ್ಕೆ ಮಾಡಲು ಖಚಿತಪಡಿಸಿಕೊಳ್ಳಿ {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find ಮೇಲಿನ ಫಿಲ್ಟರ್ಗಳು ಮತ್ತು ಲೋವರ್ಫಿಲ್ಟರ್ಗಳು.
4. ಅವುಗಳಲ್ಲಿ ಪ್ರತಿಯೊಂದರ ಮೇಲೆ ಬಲ ಕ್ಲಿಕ್ ಮಾಡಿ ಮತ್ತು ಆಯ್ಕೆಮಾಡಿ ಅಳಿಸಿ.
5. ಬದಲಾವಣೆಗಳನ್ನು ಉಳಿಸಲು ನಿಮ್ಮ ಪಿಸಿಯನ್ನು ರೀಬೂಟ್ ಮಾಡಿ.
ವಿಧಾನ 2: ಸಿಸ್ಟಮ್ ಮರುಸ್ಥಾಪನೆಯನ್ನು ರನ್ ಮಾಡಿ
1. ವಿಂಡೋಸ್ ಕೀ + ಆರ್ ಒತ್ತಿ ಮತ್ತು ಟೈಪ್ ಮಾಡಿ"sysdm.cpl” ನಂತರ ಎಂಟರ್ ಒತ್ತಿರಿ.
2. ಆಯ್ಕೆಮಾಡಿ ಸಿಸ್ಟಮ್ ಪ್ರೊಟೆಕ್ಷನ್ ಟ್ಯಾಬ್ ಮತ್ತು ಆಯ್ಕೆಮಾಡಿ ಸಿಸ್ಟಮ್ ಪುನಃಸ್ಥಾಪನೆ.
3. ಮುಂದೆ ಕ್ಲಿಕ್ ಮಾಡಿ ಮತ್ತು ಬಯಸಿದದನ್ನು ಆರಿಸಿ ಸಿಸ್ಟಮ್ ರಿಸ್ಟೋರ್ ಪಾಯಿಂಟ್.
4. ಸಿಸ್ಟಮ್ ಮರುಸ್ಥಾಪನೆಯನ್ನು ಪೂರ್ಣಗೊಳಿಸಲು ಆನ್-ಸ್ಕ್ರೀನ್ ಸೂಚನೆಯನ್ನು ಅನುಸರಿಸಿ. ಮತ್ತು ನಿಮಗೆ ಸಾಧ್ಯವೇ ಎಂದು ನೋಡಿ Fix USB Error Code 52 Windows cannot verify the digital signature, ಇಲ್ಲದಿದ್ದರೆ ಕೆಳಗೆ ಪಟ್ಟಿ ಮಾಡಲಾದ ವಿಧಾನಗಳೊಂದಿಗೆ ಮುಂದುವರಿಯಿರಿ.
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#ಎಚ್ಚರಿಕೆ: ಸುರಕ್ಷಿತ ಬೂಟ್ ಅನ್ನು ನಿಷ್ಕ್ರಿಯಗೊಳಿಸಿದ ನಂತರ ನಿಮ್ಮ PC ಅನ್ನು ಫ್ಯಾಕ್ಟರಿ ಸ್ಥಿತಿಗೆ ಮರುಸ್ಥಾಪಿಸದೆಯೇ ಸುರಕ್ಷಿತ ಬೂಟ್ ಅನ್ನು ಮರು-ಸಕ್ರಿಯಗೊಳಿಸಲು ಕಷ್ಟವಾಗಬಹುದು.
3.Restart your PC and see if you’re able to Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on ಪವರ್ ಬಟನ್ then hold ಶಿಫ್ಟ್ ಮತ್ತು ಕ್ಲಿಕ್ ಮಾಡಿ ಪುನರಾರಂಭದ (while holding the shift button).
2.ನೀವು ನೋಡುವವರೆಗೂ Shift ಬಟನ್ ಅನ್ನು ಬಿಡಬೇಡಿ ಎಂದು ಖಚಿತಪಡಿಸಿಕೊಳ್ಳಿ ಸುಧಾರಿತ ಮರುಪಡೆಯುವಿಕೆ ಆಯ್ಕೆಗಳ ಮೆನು.
3.ಈಗ ಸುಧಾರಿತ ಮರುಪಡೆಯುವಿಕೆ ಆಯ್ಕೆಗಳ ಮೆನುವಿನಲ್ಲಿ ಕೆಳಗಿನವುಗಳಿಗೆ ನ್ಯಾವಿಗೇಟ್ ಮಾಡಿ:
ದೋಷ ನಿವಾರಣೆ > ಸುಧಾರಿತ ಆಯ್ಕೆಗಳು > ಆರಂಭಿಕ ಸೆಟ್ಟಿಂಗ್ಗಳು > ಮರುಪ್ರಾರಂಭಿಸಿ
4. ಒಮ್ಮೆ ನೀವು ಮರುಪ್ರಾರಂಭಿಸಿ ಕ್ಲಿಕ್ ಮಾಡಿ ನಿಮ್ಮ ಪಿಸಿ ಮರುಪ್ರಾರಂಭಗೊಳ್ಳುತ್ತದೆ ಮತ್ತು ನೀವು ಆಯ್ಕೆಗಳ ಪಟ್ಟಿಯೊಂದಿಗೆ ನೀಲಿ ಪರದೆಯನ್ನು ನೋಡುತ್ತೀರಿ, ಅದು ಹೇಳುವ ಆಯ್ಕೆಯ ಪಕ್ಕದಲ್ಲಿರುವ ಸಂಖ್ಯೆಯ ಕೀಲಿಯನ್ನು ಒತ್ತಿ ಖಚಿತಪಡಿಸಿಕೊಳ್ಳಿಚಾಲಕ ಸಹಿ ಜಾರಿಯನ್ನು ನಿಷ್ಕ್ರಿಯಗೊಳಿಸಿ."
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc ಮತ್ತು ಸಾಧನ ನಿರ್ವಾಹಕವನ್ನು ತೆರೆಯಲು ಎಂಟರ್ ಒತ್ತಿರಿ.
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select ಚಾಲಕವನ್ನು ನವೀಕರಿಸಿ.
7. ಆಯ್ಕೆಮಾಡಿ "ನವೀಕರಿಸಿದ ಚಾಲಕ ಸಾಫ್ಟ್ವೇರ್ಗಾಗಿ ಸ್ವಯಂಚಾಲಿತವಾಗಿ ಹುಡುಕಿ."
8.Repeat the above process for every problematic device listed in Device Manager.
9.ಬದಲಾವಣೆಗಳನ್ನು ಉಳಿಸಲು ನಿಮ್ಮ ಪಿಸಿಯನ್ನು ರೀಬೂಟ್ ಮಾಡಿ ಮತ್ತು ನಿಮಗೆ ಸಾಧ್ಯವೇ ಎಂದು ನೋಡಿ Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1. ವಿಂಡೋಸ್ ಕೀ + ಆರ್ ಒತ್ತಿ ನಂತರ ಟೈಪ್ ಮಾಡಿ devmgmt.msc ಮತ್ತು Enter ಅನ್ನು ಒತ್ತಿರಿ.
2. ಬಲ ಕ್ಲಿಕ್ ಮಾಡಿ each of problematic device (yellow exclamation mark next to it) and select ಅಸ್ಥಾಪಿಸು.
3.Click Yes/OK to continue with uninstallation.
4. ಬದಲಾವಣೆಗಳನ್ನು ಉಳಿಸಲು ನಿಮ್ಮ ಪಿಸಿಯನ್ನು ರೀಬೂಟ್ ಮಾಡಿ.
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys ಗೆ ಫೈಲ್ಗಳು usbehciold.sys & usbhubold.sys.
3. ವಿಂಡೋಸ್ ಕೀ + ಆರ್ ಒತ್ತಿ ನಂತರ ಟೈಪ್ ಮಾಡಿ devmgmt.msc ಮತ್ತು Enter ಅನ್ನು ಒತ್ತಿರಿ.
4.ವಿಸ್ತರಿಸು ಯುನಿವರ್ಸಲ್ ಸೀರಿಯಲ್ ಬಸ್ ನಿಯಂತ್ರಕಗಳು ತದನಂತರ ಬಲ ಕ್ಲಿಕ್ ಮಾಡಿ Standard Enhanced PCI to USB Host Controller ಮತ್ತು ಆಯ್ಕೆ ಮಾಡಿ ಅಸ್ಥಾಪಿಸು.
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2.ಈಗ cmd ನಲ್ಲಿ ಈ ಕೆಳಗಿನವುಗಳನ್ನು ಟೈಪ್ ಮಾಡಿ ಮತ್ತು ಎಂಟರ್ ಒತ್ತಿರಿ:
Sfc / scannow sfc / scannow /offbootdir = c: /offwindir = c:windows
3. ಮೇಲಿನ ಪ್ರಕ್ರಿಯೆಯು ಮುಗಿಯುವವರೆಗೆ ನಿರೀಕ್ಷಿಸಿ ಮತ್ತು ಒಮ್ಮೆ ನಿಮ್ಮ ಪಿಸಿಯನ್ನು ಮರುಪ್ರಾರಂಭಿಸಿ.
4.ಮುಂದೆ, ಇಲ್ಲಿಂದ CHKDSK ಅನ್ನು ರನ್ ಮಾಡಿ ಚೆಕ್ ಡಿಸ್ಕ್ ಯುಟಿಲಿಟಿ (CHKDSK) ನೊಂದಿಗೆ ಫೈಲ್ ಸಿಸ್ಟಮ್ ದೋಷಗಳನ್ನು ಸರಿಪಡಿಸಿ.
5. ಮೇಲಿನ ಪ್ರಕ್ರಿಯೆಯು ಪೂರ್ಣಗೊಳ್ಳಲಿ ಮತ್ತು ಬದಲಾವಣೆಗಳನ್ನು ಉಳಿಸಲು ನಿಮ್ಮ ಪಿಸಿಯನ್ನು ಮತ್ತೆ ರೀಬೂಟ್ ಮಾಡಿ.
ನಿಮಗೆ ಸಾಧ್ಯವೇ ಎಂದು ನೋಡಿ Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1. ವಿಂಡೋಸ್ ಕೀ + ಎಕ್ಸ್ ಒತ್ತಿ ನಂತರ ಆಯ್ಕೆ ಮಾಡಿ ಕಮಾಂಡ್ ಪ್ರಾಂಪ್ಟ್ (ನಿರ್ವಹಣೆ).
2.Type the following command into cmd and hit Enter after each one:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
3.If the above command doesn’t work then try the following:
bcdedit /deletevalue loadoptions
bcdedit -set ಪರೀಕ್ಷಾ ಆಫ್
4. ಬದಲಾವಣೆಗಳನ್ನು ಉಳಿಸಲು ನಿಮ್ಮ ಪಿಸಿಯನ್ನು ರೀಬೂಟ್ ಮಾಡಿ.
ನಿಮಗಾಗಿ ಶಿಫಾರಸು ಮಾಡಲಾಗಿದೆ:
ಅದನ್ನೇ ನೀವು ಯಶಸ್ವಿಯಾಗಿ ಹೊಂದಿದ್ದೀರಿ Fix USB Error Code 52 Windows cannot verify the digital signature ಆದರೆ ಈ ಮಾರ್ಗದರ್ಶಿಗೆ ಸಂಬಂಧಿಸಿದಂತೆ ನೀವು ಇನ್ನೂ ಯಾವುದೇ ಪ್ರಶ್ನೆಯನ್ನು ಹೊಂದಿದ್ದರೆ ನಂತರ ಕಾಮೆಂಟ್ ವಿಭಾಗದಲ್ಲಿ ಅವರನ್ನು ಕೇಳಲು ಮುಕ್ತವಾಗಿರಿ.