When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
혹시라도 문제가 생길 경우를 대비해 복원 지점을 만들어 두시기 바랍니다.
방법 1: 그래픽 카드 드라이버 제거
1. 장치 관리자에서 NVIDIA 그래픽 카드를 마우스 오른쪽 버튼으로 클릭하고 제거.
2. 확인 메시지가 표시되면 예를 선택합니다.
3. Windows 키 + X를 누르고 다음을 선택합니다. 제어판.
4. 제어판에서 프로그램을 제거합니다.
5. 다음 것, Nvidia와 관련된 모든 것을 제거하십시오.
6. 시스템을 재부팅하여 변경 사항을 저장하고 다시 설정을 다운로드 제조업체의 웹 사이트에서.
5. 모든 것을 제거한 것이 확실하면 드라이버를 다시 설치해 보세요. 설정은 문제 없이 작동해야 합니다.
방법 2: 그래픽 카드 드라이버 업데이트
1. Windows 키 + R을 누른 다음 입력 devmgmt.msc를 and hit enter to open Device Manager.
2. 다음으로 확장하세요. 디스플레이 어댑터 and right-click on your Nvidia Graphic Card and select 사용하도록 설정합니다.
3. Once, you have done this again, right-click on your graphic card and select “드라이버 소프트웨어를 업데이트하십시오."
4. 고르다 "업데이트 된 드라이버 소프트웨어 자동 검색” and let it finish the process.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “드라이버 소프트웨어 업데이트” but this time on the next screen select “내 컴퓨터에서 드라이버 소프트웨어 찾아보기."
7. Now. select "컴퓨터의 장치 드라이버 목록에서 선택하겠습니다.. "
8. Finally, select the compatible driver from your 엔비디아 그래픽 카드 list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select 속성.
2. 그런 다음 고급 시스템 설정 왼쪽 메뉴에서.
참고 : You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl을 Enter를 누르십시오.
3.로 전환 고급 탭 if not already there and click Settings under 공연.
4. Now select the checkbox which says “최상의 성능을 위해 조정하십시오."
5. 적용을 클릭한 후 좋아요.
6. PC를 재부팅하여 변경 사항을 저장합니다.
Method 4: Increase GPU processing time (Registry Fix)
1. Windows 키 + R을 누른 다음 입력 regedit를 Enter 키를 눌러 레지스트리 편집기를 엽니다.
2. 다음 레지스트리 키로 이동합니다.
HKEY_LOCAL_MACHINESYSTEMC 현재 제어 설정 제어 그래픽 드라이버
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click 신제품 and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
32비트 Windows의 경우:
ㅏ. 고르다 DWORD (32 비트) 값 및 유형 TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
64비트 Windows의 경우:
ㅏ. 고르다 QWORD (64-bit) Value 및 유형 TdrDelay as the Name.
b. Double click on TdrDelay and 8 입력 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from Microsoft’s official website.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
권장 사항 :
그게 당신이 성공적으로 Fix Display driver stopped responding and has recovered error [SOLVED] 그러나 이 게시물과 관련하여 여전히 질문이 있는 경우 댓글 섹션에서 자유롭게 질문하세요.