When you are enjoying your favorite song via Bluetooth headphones, the sound may sometimes be cut off without any reason. At this moment, you may feel infuriated and you may adjust your Bluetooth positions and angles, yet the Bluetooth audio stuttering continues to happen. Even though your Bluetooth headphones are fully charged, you cannot use them if it has any internal issues or if there are any incompatible audio settings on your Windows 10 computer. Don’t worry! You are not the only one who faces Bluetooth headphones stuttering Windows 10 issues. We have some effective amazing fixes for you that will bring your computer out of the trouble. So, continue reading.
How to Fix Bluetooth Headphones Stuttering on Windows 10
Here are some common reasons that cause Bluetooth audio stuttering issues on 윈도우 10. Analyze them deeply to find out the exact cause in your case.
- Bluetooth battery is running low.
- Bluetooth device is far away from the signal source.
- Signal mismatch.
- Human body is interfering with the Bluetooth signal.
- One or more Bluetooth devices are on at the same time.
- Outdated firmware.
- Outdated Operating System and incompatible audio drivers.
- Time to upgrade; headphones are age-old!
In this section, we have compiled a list of methods that help you troubleshoot Bluetooth headphones stuttering Windows 10 issues. Firstly check and fix the hardware problems and then move ahead to Windows troubleshooting methods as instructed below.
Method 1: Charge Bluetooth Battery
You may sometimes analyse when Bluetooth headphones lose charge, the audio may turn out choppy. In this case, you have to charge your Bluetooth device and always make sure there is a minimum level of power to avoid any audio problems.
In some latest Bluetooth devices, the battery level can be identified by colour code. For example, in the OnePlus Earbuds,
- 초록색 – Indicates battery level is optimum for use.
- 빨간색 – Indicates battery level is very low and needs charging.
So, what if the battery level is adequate, but still facing Bluetooth headphones stuttering Windows 10? Check and try the following methods!
Method 2: Maintain Bluetooth Signal Range
Bluetooth devices make use of short wave radio signals and when you are out of range, you cannot hear the audio properly and the audio disconnects later. Your Bluetooth device manufacturer would have mentioned the signal range of your device on the package. Check it out or browse the internet to find out the coverage range. Then, maintain the same distance as mentioned. Check if this works.
또한 읽기 : How to Install Bluetooth on Windows 10
Method 3: Avoid Cross Body Interference
You may sometimes face Bluetooth headphones stuttering Windows 10 when you are keeping one of the Bluetooth devices on your pant trousers or your palm and the other on your ear.
This may be due to the 70% + water content in your body. Bluetooth radio waves travel very bad over waterlogging substances, if you are in this situation, please change the position of Bluetooth devices.
Method 4: Remove Problematic Obstructions
Similarly, if there are any metallic interruptions, Bluetooth waves bounce out and you may face Bluetooth audio stuttering issue on your Windows 10 PC. Likewise, if there is any 철근 콘크리트 (such as a wall) substance between your computer and Bluetooth device, you may face audio stuttering issues. You are advised to remove these obstructions and sit near your Bluetooth device and computer.
Method 5: Avoid Placing Devices with High Wi-Fi Range
Several modern wireless devices like smart bulbs, high range routers, cordless phones, Wi-Fi routers, and monitors employ high Wi-Fi range signals, and some may even work with 2.4 GHz – 2.5Ghz.
Also, if you are using a Bluetooth device, avoid Wi-Fi interferences in the transmission paths. In addition to this, remove extra Bluetooth connections connected to your computer and check if you face the problem again.
Method 6: Use USB Cable (For Bluetooth Dongle Users)
In some cases, electrical interference between the module of your motherboard and your Bluetooth device may cause Bluetooth audio stuttering issue. This problem can be resolved by increasing the distance between the USB dongle and the USB port on Windows 10.
또한 읽기 : How to Rename Bluetooth Devices on Windows 10
Method 7: Reconnect Bluetooth
As of now, you have followed hardware troubleshooting methods to fix Bluetooth headphones stuttering Windows 10 issue. Still, if you did not attain any fix, then the problem is not with your hardware. To troubleshoot temporary problems associated with your Bluetooth device and your computer, turn off the Bluetooth and turn it on again after some time as instructed below.
1. 누르세요 Windows 키 및 유형 블루투스 설정, then hit Enter 키.
2. Now, toggle off the Bluetooth icon as shown.
3. Wait for a while and toggle ON the same setting again.
Check if you have fixed Bluetooth audio stuttering issue on Windows 10.
Method 8: Select Correct Audio Output
When you are using more than one audio output device, you have to confirm whether Bluetooth device is used up as an output device. To check the audio output in your Windows 10 PC, follow the below-mentioned steps.
1. 클릭 Speakers icon at the right corner of the 작업 표시 줄.
2. 이제 화살표 아이콘 to expand the list of audio devices connected to the computer.
3. Then, select the audio device (your Bluetooth device) and make sure the audio is playing through the selected device.
If this method doesn’t help you, move ahead to the next one.
또한 읽기 : How to Fix Bluetooth problems in Windows 10
방법 9: Bluetooth 문제 해결사 실행
Your Windows 10 computer has a built-in troubleshooter to fix many common problems arising from it. Likewise, you can fix Bluetooth headphones stuttering Windows 10 issue by running Bluetooth troubleshooter as instructed below.
1. 누르세요 Windows 키, 유형 설정 문제 해결,를 클릭하십시오 엽니다.
2. 아래로 스크롤하여 다른 문제 찾기 및 수정 안내
3. 여기에서 다음을 선택하세요. Bluetooth 그리고 클릭 문제 해결사 실행 옵션을 선택합니다.
4. Windows will start Detecting problems. If there are any problems detected then follow on-screen instructions to 수정사항 적용.
Method 10: Change Wi-Fi Bands
As discussed earlier, Bluetooth audio stuttering happens due to interference between two different wireless devices using the same frequency. To confirm this, you can take a simple hack of turning off your Wi-Fi router. After your Wi-Fi router is completely turned off check if you can fix Bluetooth headphones stuttering Windows 10 issue. If so, the problem is due to Wi-Fi and Bluetooth signal interferences. In this case, you can try switching between 2.4GHz and 5GHz Wi-Fi bands on your Windows 10 computer as instructed below.
1. 히트 Windows 키입력 장치 관리자,를 클릭하십시오 엽니다.
2. 더블 클릭 네트워크 어댑터 to expand the network drivers.
3. Then, right-click on your Wi-Fi 인터넷 adapter and click on 등록.
4. 이제 다음을 검색해 보세요. 밴드 or 선호하는 밴드 에서 옵션 비즈니스 재산 메뉴를 선택하고 클릭하십시오.
5. Now, expand the 드롭 다운 메뉴 의 가치관 field and set the value as 5GHz 대역 선호 as shown. Then, click on OK 을 클릭하여 변경 사항을 저장합니다.
참고 : If the value is already set to 5GHz 대역 선호, then change the value to Prefer 2.4GHz 그리고 클릭 OK.
6. 마지막으로, 다시 시작 당신의 PC and check if you have fixed Bluetooth audio stuttering issue.
또한 읽기 : Fix Bluetooth can’t turn off on Windows 10
Method 11: Re-enable Bluetooth Sound Card
You can easily resolve Bluetooth headphones stuttering Windows 10 issue by restarting the Bluetooth sound card as instructed below.
1. 히트 Windows 키 및 유형 장치 관리자, 다음을 클릭하십시오. 엽니다.
2. Then, expand the Bluetooth section by double-clicking on it.
3. Then, right-click on your Bluetooth sound card 선택하고 기기 사용 중지 옵션을 선택합니다.
4. 이제 다음을 클릭하여 프롬프트를 확인합니다. 가능 와 PC 재부팅. Then, repeat 1-2 단계.
5. Next, right-click on your Bluetooth 사운드 카드 선택하고 기기 사용 설정 옵션을 선택합니다.
6. Now, try playing any sound on Bluetooth device and check if the issue is resolved or not.
방법 12: 손상된 파일 복구
For perfect audio quality services, a few essential files and programs must be functioning on your PC. But, if they are corrupt or misconfigured, you will face Bluetooth audio stuttering issues. Fortunately, all these corrupt misconfigured files can be repaired by using the inbuilt utilities of your Windows 10 PC namely, 시스템 파일 검사기 와 배포 이미지 서비스 및 관리. Windows 10에서 시스템 파일을 복구하는 방법에 대한 가이드를 읽고 지침에 따라 손상된 파일을 모두 복구하십시오.
Wait for the commands to be executed and check if you have fixed bluetooth issue on your PC.
또한 읽기 : Windows 10에서 Bluetooth 드라이버 오류 수정
Method 13: Restart Bluetooth Audio Services
A few essential Windows audio services will help you prevent Bluetooth audio stuttering issues in your Windows 10 PC. If in case, if these services are turned off, you may face several conflicts. Hence, you are advised to restart a few essential audio services as instructed below steps.
1. 누르세요 Windows 키입력 서비스,를 클릭하십시오 관리자 권한으로 실행.
2. 이제 아래로 스크롤하여 Bluetooth 지원 서비스.
3. Now, in the new pop-up window, select the 시작 유형 에 Automatic, 그림과 같이.
참고 : 경우 서비스 상태 is 중단, 다음을 클릭하십시오. 스타트 단추. 만약 서비스 상태 is 달리는, 클릭 중지 그리고 다시 시작하세요.
4. 을 클릭 적용> 확인 을 클릭하여 변경 사항을 저장합니다.
Method 14: Disable Audio Enhancements
If you find your audio working well for other multimedia resources, but the sound seems to be of low quality or noisy, you are advised to change the sample rate. A low-frequency sample rate will cause Bluetooth audio stuttering issue, yet you can select a higher frequency sample rate by following the below-mentioned steps.
1. 마우스 오른쪽 버튼으로 Speakers icon at the bottom right corner of the screen and select the 소리 옵션을 선택합니다.
2. 그런 다음 재생 tab and select the default Bluetooth audio device followed by the 등록 버튼을 클릭하세요.
3. 그런 다음 Advnaced tab and from the drop-down menu under 기본 형식, make sure you select the highest frequency range (16 bit, 44100 Hz).
4. 이제 개선 tab and check the box corresponding to 모든 개선 사항 비활성화 보여진 바와 같이.
5. 을 클릭 신청 그리고 OK to save the changes. Check if you face Bluetooth audio stuttering issue again. If so, adjust different levels of frequency ranges by repeating these steps and confirm which range solves the problem.
또한 읽기 : Fix Windows 10 Audio Crackling
Method 15: Disable Remote Control and Hands-free Telephony
Hands-free telephony is a Windows service that is used to enable your Bluetooth device to answer phone calls. But, it sometimes reduces the sound quality of your voice signal contributing to Bluetooth audio stuttering issue. Similarly, the 리모트 컨트롤 feature also has its own disadvantages. If you wonder how to fix Bluetooth stuttering amidst these features, here are a few troubleshooting instructions.
1. 히트 Windows 키 및 유형 Control Panel, then click on 엽니다.
2. 이제 장치 및 프린터보기 link as shown.
3. 이제 마우스 오른쪽 버튼을 클릭하세요. 블루투스 장치 그리고 클릭 등록 보여진 바와 같이.
4. In the next window, switch to the 서비스 tab and uncheck the boxes, Hands-free Telephony 와 리모트 컨트롤 묘사 된대로.
5. 마지막으로 적용> 확인 을 클릭하여 변경 사항을 저장합니다.
Method 16: Adjust Roaming Aggressiveness Settings
The Roaming Aggressiveness settings in your computer change the signal strength threshold at which Wi-Fi network adapters scan for other Access Point candidates to offer a better signal connection. But, when this setting is fixed to the highest setting, you will face Bluetooth headphones stuttering Windows 10 issue. You are advised to turn off the setting as instructed below.
1. 시작 기기 관리자 에 윈도우 검색.
2. 더블 클릭 네트워크 어댑터 to expand the network drivers.
3. Then, right-click on your Wi-Fi 인터넷 adapter and click on 등록.
4. 이제 다음을 검색해 보세요. 로밍 공격성 에서 옵션 비즈니스 재산 목록을 선택하고 클릭하십시오.
5. 이제 가치관 에 최저 그리고 클릭 OK.
Check if you have fixed Bluetooth audio stuttering issue.
또한 읽기 : Fix Windows 10 Bluetooth Mouse Lag
Method 17: Disable Bluetooth Collaboration (If Applicable)
Broadcom Network adapter is software that helps your Bluetooth device to be connected to the internet. But this setting may interfere with your device settings causing the discussed problem. If you want to know how to fix Bluetooth stuttering by turning off this setting, please follow the below-listed instructions.
1. 열려있는 장치 관리자 가서 네트워크 어댑터, then right-click on your network driver and select 등록.
2. 이제 고급 탭 그리고 클릭 Bluetooth Collaboration 아래 비즈니스 재산 명부.
3. Then, expand the 가치관 drop-down list and click on 장애인.
4. 마지막으로 OK to save the changes and check if you have fixed the issue.
Method 18: Update Bluetooth Drivers
Outdated and incompatible Bluetooth drivers will always result in Bluetooth headphones stuttering Windows 10 issue. Always ensure you use an updated version of drivers and if your computer lacks the latest drivers, you are advised to update them as instructed in our guide How to Update Realtek HD Audio Drivers in Windows 10.
참고 : Make sure you follow the same steps for Bluetooth Audio drivers 아래에 묘사된 것처럼.
Once you have updated your Bluetooth drivers to the latest version.
또한 읽기 : What is a Device Driver? How Does It Work?
Method 19: Reinstall Bluetooth Drivers
Incompatible drivers must be reinstalled to resolve all audio related problems. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or by implementing the steps manually as instructed in our guide How to Uninstall and Reinstall Drivers on Windows 10. Follow the steps corresponding to Bluetooth drivers as depicted.
After reinstalling the audio drivers, check if you can hear the audio on your Bluetooth device.
Method 20: Roll Back Bluetooth Driver Updates
Sometimes, the current version of audio drivers may cause any audio conflicts and in this case, you have to restore previous versions of installed drivers. This process is called 드라이버 롤백 Windows 10에서 드라이버를 롤백하는 방법 가이드를 따르면 컴퓨터 드라이버를 이전 상태로 쉽게 롤백할 수 있습니다.
Wait until the previous versions of drivers are installed on your Windows 10 PC. Once done, check if you have fixed the issue.
방법 21: Windows 업데이트
If there are any new Microsoft updates pending to be installed on your PC, a few bugs and problems cannot be resolved on your computer. As suggested by many users, updating Windows 10 computers will help you resolve Bluetooth audio stuttering issue. Follow our guide How to Download and Install Windows 10 Latest Update to update your Windows 10 computer.
After updating your Windows Operating System, check whether you can access audio on Bluetooth device.
또한 읽기 : How to Boost the Bass of Headphones and Speakers in Windows 10
Method 22: Reset Bluetooth Device
Still, if you are thinking about how to fix Bluetooth stuttering issue even after trying all these troubleshooting steps, then you must try factory resetting your device. The resetting process of many headphones involves pressing the power button for a particular extent of time. The steps to reset your device depends on the model you are using and for detailed instructions, follow the below-mentioned steps.
참고 : Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
1. Disconnect your 블루투스 장치 from Windows 10 PC.
2. 이제 전원 버튼 of your Bluetooth device for about 7에서 10 초.
3. A flash occurs (probably blue light) about 4 times.
4. Now all the settings and pairing information will be removed from your device.
5. Pair your device again and check if Bluetooth headphones stuttering Windows 10 issue is fixed now.
참고 : Ensure you are within the Bluetooth signal range. Remove all other wireless devices connected to your computer, especially Wi-Fi devices.
Method 23: Update Device Firmware
Firmware updates are released to resolve the problems and struggles reported on Bluetooth devices. You can update the firmware via apps and there are so many online platforms to support you in this process. If you have bought your Bluetooth device, seek professional support via email, since that’s the only means you can go for. On the other hand, if you have bought your Bluetooth device from a retail store, take your shoes and run to seek help from the retailer.
권장 사항 :
이 가이드가 도움이 되기를 바라며 문제를 해결할 수 있기를 바랍니다. bluetooth headphones stuttering on Windows 10. Feel free to reach out to us with your queries and suggestions via the comments section below.