Fix Driver Power State Failure in Windows 10: Driver Power State Failure Error (0x0000009F) mostly occur due to outdated or incompatible drivers for the hardware devices of your PC. 드라이버 전원 상태 오류 is an error which is displayed on Blue Screen of Death(BSOD), which doesn’t mean that your computer can’t be repaired, it just means that the PC has encountered something that it didn’t know what to do.
And the biggest problem you encounter is that you can’t log on to the Windows, because every time you restart your PC you will be shown Driver Power State Failure Error ( DRIVER_POWER_STATE_FAILURE Error ), hence you are stuck in an endless loop. However, this error is totally fixable if you will follow this article as shown below.
알림: Most of the users who encounter this issue have put their computer to sleep and when they try to wake up their PC they encounter this error.
The most common driver which cause this error are antivirus software’s, so try to disable them and try to reboot your Windows. Always update your BIOS!
Windows 10에서 드라이버 전원 상태 오류 수정
Before going any further let’s discuss how to Enable Legacy Advanced Boot Menu so that you can easily get into Safe Mode:
1. 윈도우 10을 다시 시작하세요.
2.As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3. Windows 10 부팅 가능한 설치 DVD를 넣고 PC를 다시 시작합니다.
4. CD 또는 DVD에서 부팅하려면 아무 키나 누르라는 메시지가 표시되면 아무 키나 눌러 계속합니다.
5.당신을 선택하세요 언어 환경 설정, 다음을 클릭하십시오. 수리를 클릭하십시오 왼쪽 하단에 있는 컴퓨터.
6. 옵션 선택 화면에서 문제 해결.
7. 문제 해결 화면에서 고급 옵션.
8.On Advanced options screen, click 명령 프롬프트.
9.When the Command Prompt(CMD) open type C: Enter를 누르십시오.
10.Now type the following command:
BCDEDIT / SET {DEFAULT} BOOTMENUPOLICY LEGACY
11.And hit enter to 레거시 고급 부팅 메뉴를 활성화합니다.
12.Close Command Prompt and back on the Choose an option screen, click continue to restart Windows 10.
13.Finally, don’t forget to eject your Windows 10 installation DVD, in order to boot into 안전 모드.
Method 1: Uninstall Problematic Driver
1. As the computer restarts, press F8 to display the 고급 부팅 옵션 선택 안전 모드.
2.Hit Enter to start Windows 10 in Safe Mode.
3.Press Windows Key + R and type “devmgmt.msc를” then hit enter to open Device Manager.
4.Now inside Device Manager, you must see the problematic device driver (it has a 노란색 표시 next to it).
Also, see Fix This device cannot start (Code 10)
5.Once the problematic device driver is identified, right click and select 제거.
6.When asked for confirmation, click 좋아요.
7.Once the driver is uninstalled restart Windows 10 normally.
Method 2: Check Windows Minidump file
1.Let’s first make sure that minidumps are enabled.
2.Press Windows Key + R and type “sysdm.cpl을” then press enter.
3.Go to advanced tab and click on the Settings button in 시작 및 복구.
4. 다음을 확인하세요. 자동 재시작 under System failure is unchecked.
5.아래 Write Debugging Information header, select Small memory dump (256 kB) in the drop-down box.
6. 확인하십시오 Small Dump Directory 다음과 같이 나열됩니다. %systemroot%Minidump.
7.Click OK and restart your PC to apply the changes.
8.Now install this program called 후크래시.
9. 실행 후크래시 and click on Analyze.
10..Scroll down to view the report and check for the problematic driver.
11.Finally, update the driver and Reboot to apply your changes.
12.Now Press Windows 키 + R "msinfo32” 그런 다음 Enter 키를 누릅니다.
13.에서 시스템 요약 make sure all your drivers are up to date.
14. 확인하십시오 바이오스 is also updated, else update it.
15.Select 소프트웨어 환경 다음을 클릭하십시오 Running Tasks.
16.Again make sure the drivers have updated i.e. no drivers have file dated back to 2 years.
17.Reboot your PC and this would Windows 10에서 드라이버 전원 상태 오류 수정 하지만 그렇지 않다면 계속하세요.
Method 3: Run System File Check (SFC)
1.In the safe mode, Right click on Start and select Command Prompt(Admin) to open cmd.
2. cmd에 다음 명령을 입력합니다. /지금 검색
3.Let system file check run, usually, it takes 5 to 15 minutes.
참고 : Sometimes you have to run SFC command 3-4 times to fix the problem.
4.After the process is finished and you receive the following message:
Windows 리소스 보호에서 손상된 파일을 찾아 성공적으로 복구했습니다. 자세한 내용은 CBS.Log %WinDir%LogsCBSCBS.log.
5.Simply restart your PC and see if the problem is resolved or not.
6.If you receive the following message:
Windows 리소스 보호에서 손상된 파일을 찾았지만 일부를 수정할 수 없습니다. 자세한 내용은 CBS.Log %WinDir%LogsCBSCBS.log.
7.Then you have to manually repair corrupted files, to do this first view details of the SFC process.
8.At the command prompt, type the following command, and then press ENTER:
findstr /c:"[SR]" %windir%LogsCBSCBS.log >"%userprofile%Desktopsfcdetails.txt"
9.Open the Sfcdetails.txt 파일을 바탕 화면에서.
10.The Sfcdetails.txt file uses the following format: Date/Time SFC detail
11.The following sample log file contains an entry for a file that could not be repaired:
2014-02-17 02:40:22, CSI 000001aa [SR] Cannot repair member file [l:22{11}]"autochk.exe" of Microsoft-Windows-Autochk, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
12.Now type the following command in the cmd:
DISM.exe /Online /Cleanup-image /Scanhealth && DISM.exe /Online /Cleanup-image /Restorehealth
This will run DSIM(Deployment Image Servicing and Management) restore commands and will fix SFC errors.
13.After running DISM it is a good idea to re-run SFC /scannow to make sure all the issues were fixed.
14.If for some reason DISM command is not working try this SFCFix Tool.
15.PC를 다시 시작하고 가능한지 확인하세요. Fix Driver Power State Failure in Windows 10.
Method 4: Restore you PC to earlier time
1. Windows 키 + R을 누르고 "를 입력하세요."sysdm.cpl을” 그런 다음 Enter 키를 누릅니다.
2.Select 시스템 보호 탭하고 선택 시스템 복원.
3.다음을 클릭하고 원하는 것을 선택하세요. 시스템 복원 지점.
4.Follow on screen instruction to complete system restore.
5.After reboot, you must have fixed the Driver Power State Failure.
당신을 위해 추천 된:
그게 당신이 성공적으로 Windows 10에서 드라이버 전원 상태 오류 수정 if you still have any question regarding this post feel free to ask them in comments.